Torsion performance of pearlitic steel wires: Effects of morphology and crystallinity of cementite

[1]  J. Zuo,et al.  Extremely hard amorphous-crystalline hybrid steel surface produced by deformation induced cementite amorphization , 2018, Acta Materialia.

[2]  Jianqing Jiang,et al.  Torsion delamination and recrystallized cementite of heavy drawing pearlitic wires after low temperature annealing , 2018 .

[3]  C. Borchers,et al.  Cold-drawn pearlitic steel wires , 2016 .

[4]  Gholamali Ali Nematollahi,et al.  Deformation‐Induced Martensite: A New Paradigm for Exceptional Steels , 2016, Advanced materials.

[5]  N. Hansen,et al.  Dislocation-based plasticity and strengthening mechanisms in sub-20 nm lamellar structures in pearlitic steel wire , 2016 .

[6]  Jianqing Jiang,et al.  Cementite nano-crystallization in cold drawn pearlitic wires instigated by low temperature annealing , 2016 .

[7]  Z. Pan,et al.  Manipulating the interfacial structure of nanomaterials to achieve a unique combination of strength and ductility , 2016, Nature Communications.

[8]  Masaki Tanaka,et al.  Nature of delamination cracks in pearlitic steels , 2016 .

[9]  J. Čížek,et al.  Defect Recovery in Severely Deformed Ferrite Lamellae During Annealing and Its Impact on the Softening of Cold-Drawn Pearlitic Steel Wires , 2016, Metallurgical and Materials Transactions A.

[10]  Jianqing Jiang,et al.  Microstructure and mechanical properties of cold-drawn pearlitic wires affect by inherited texture , 2015 .

[11]  Jianqing Jiang,et al.  EFFECT OF PEARLITIC LAMELLA ORIENTATION ON DEFORMATION OF PEARLITE STEEL WIRE DURING COLD DRAWING , 2015 .

[12]  Qing Liu,et al.  Influence of Torsion Deformation on Textures of Cold Drawing Pearlitic Steel Wires , 2015, Acta Metallurgica Sinica (English Letters).

[13]  D. Ponge,et al.  Mechanisms of subgrain coarsening and its effect on the mechanical properties of carbon-supersaturated nanocrystalline hypereutectoid steel , 2015 .

[14]  Y. Im,et al.  The effect of a non-circular drawing sequence on delamination characteristics of pearlitic steel wire , 2014 .

[15]  M. Herbig,et al.  Segregation stabilizes nanocrystalline bulk steel with near theoretical strength. , 2014, Physical review letters.

[16]  Zonghan Xie,et al.  Deformation of cementite in cold drawn pearlitic steel wire , 2014 .

[17]  Hong-wu Song,et al.  Hardening and softening mechanisms of pearlitic steel wire under torsion , 2014 .

[18]  Young-woon Kim,et al.  Aging behavior and delamination in cold drawn and post-deformation annealed hyper-eutectoid steel wires , 2013 .

[19]  N. Hansen,et al.  Hierarchical structures in cold-drawn pearlitic steel wire , 2013 .

[20]  T. Ungár,et al.  Defects in Carbon-Rich Ferrite of Cold-Drawn Pearlitic Steel Wires , 2013, Metallurgical and Materials Transactions A.

[21]  Jianqing Jiang,et al.  Origin and mechanism of torsion fracture in cold-drawn pearlitic steel wires , 2013, Journal of Materials Science.

[22]  N. Hansen,et al.  Hall-Petch and dislocation strengthening in graded nanostructured steel , 2012 .

[23]  Jianqing Jiang,et al.  Revealing microstructural and mechanical characteristics of cold-drawn pearlitic steel wires undergoing simulated galvanization treatment , 2012 .

[24]  D. Raabe,et al.  Evolution of strength and microstructure during annealing of heavily cold-drawn 6.3 GPa hypereutecto , 2012 .

[25]  D. Raabe,et al.  Atomic-scale mechanisms of deformation-induced cementite decomposition in pearlite , 2011 .

[26]  Qing Liu,et al.  Microstructure and strengthening mechanisms in cold-drawn pearlitic steel wire , 2011 .

[27]  Q. Liu,et al.  Study on dislocation slips in ferrite and deformation of cementite in cold drawn pearlitic steel wires from medium to high strain , 2011 .

[28]  D. Raabe,et al.  Metallic composites processed via extreme deformation: Toward the limits of strength in bulk materials , 2010 .

[29]  Yuzeng Chen,et al.  Carbon-defect interaction during recovery and recrystallization of heavily deformed pearlitic steel wires , 2010 .

[30]  Jianqing Jiang,et al.  Characteristics of a fast low-temperature zinc phosphating coating accelerated by an ECO-friendly hydroxylamine sulfate , 2010 .

[31]  Byung-Jun Kim,et al.  Pass schedule of wire drawing process to prevent delamination for high strength steel cord wire , 2009 .

[32]  Kyung-Tae Park,et al.  Effects of post-deformation annealing conditions on the behavior of lamellar cementite and the occurrence of delamination in cold drawn steel wires , 2009 .

[33]  C. Park,et al.  Nanostructure and mechanical properties of heavily cold-drawn steel wires , 2009 .

[34]  C. Borchers,et al.  Partially amorphous nanocomposite obtained from heavily deformed pearlitic steel , 2009 .

[35]  J. Fundenberger,et al.  Influence of torsion deformation on microstructure of cold-drawn pearlitic steel wire , 2008 .

[36]  S. Goto,et al.  Cold drawn lamellar microstructure for developing ultra-high strength wires , 2007 .

[37]  E. G. Kang,et al.  The prediction of the occurrence of the delamination in cold drawn hyper-eutectoid steel wires , 2007 .

[38]  T. Furuhara,et al.  Ultra-fine (α+θ) Duplex Structure Formed by Cold Rolling and Annealing of Pearlite , 2005 .

[39]  Tsuyoshi Shiozaki,et al.  Development of High Strength Hot-rolled Sheet Steel Consisting of Ferrite and Nanometer-sized Carbides , 2004 .

[40]  Y. Morii,et al.  Strength Anisotropy and Residual Stress in Drawn Pearlite Steel Wire , 2004 .

[41]  M. Elices.  Influence of residual stresses in the performance of cold-drawn pearlitic wires , 2004 .

[42]  M. Zelin.  Microstructure evolution in pearlitic steels during wire drawing , 2002 .

[43]  N. Maruyama,et al.  Atom probe study on the ductility of drawn pearlitic steels , 2002 .

[44]  G. D. Smith,et al.  Optimization of mechanical properties of high-carbon pearlitic steels with Si and V additions , 2001 .

[45]  S. Nishida,et al.  Cementite decomposition in heavily drawn pearlite steel wire , 2001 .

[46]  K. Shimizu,et al.  Size dependence of delamination of high-carbon steel wire , 2001 .

[47]  K. Hono,et al.  Atom probe and transmission electron microscopy investigations of heavily drawn pearlitic steel wire , 1999 .

[48]  I. Lefever,et al.  Fragmentation of as-drawn pearlitic steel wires during torsion tests , 1998 .

[49]  K. Hono,et al.  APFIM and TEM studies of drawn pearlitic wire , 1997 .

[50]  J. Languillaume,et al.  Cementite dissolution in heavily cold drawn pearlitic steel wires , 1997 .

[51]  C. Bae,et al.  Effect of interlamellar spacing on the delamination of pearlitic steel wires , 1996 .

[52]  C. Bae,et al.  Void initiation and microstructural changes during wire drawing of pearlitic steels , 1995 .

[53]  G. D. Smith,et al.  Pearlite phase transformation in Si and V steel , 1995 .

[54]  Ke Han,et al.  Effects of vanadium addition on nucleation and growth of pearlite in high carbon steel , 1994 .

[55]  J. G. Sevillano,et al.  Room temperature plastic deformation of pearlitic cementite , 1975 .

[56]  G. Langford.  A study of the deformation of patented steel wire , 1970 .

[57]  Toshihiko Takahashi,et al.  Flow Stress and Work-Hardening of Pearlitic Steel , 1970 .

[58]  J. Embury,et al.  The structure and properties of drawn pearlite , 1966 .