Molecularly Imprinted Polymer Materials as Selective Recognition Sorbents for Explosives: A Review

Explosives are of significant interest to homeland security departments and forensic investigations. Fast, sensitive and selective detection of these chemicals is of great concern for security purposes as well as for triage and decontamination in contaminated areas. To this end, selective sorbents with fast binding kinetics and high binding capacity, either in combination with a sensor transducer or a sampling/sample-preparation method, are required. Molecularly imprinted polymers (MIPs) show promise as cost-effective and rugged artificial selective sorbents, which have a wide variety of applications. This manuscript reviews the innovative strategies developed in 57 manuscripts (published from 2006 to 2019) to use MIP materials for explosives. To the best of our knowledge, there are currently no commercially available MIP-modified sensors or sample preparation methods for explosives in the market. We believe that this review provides information to give insight into the future prospects and potential commercialization of such materials. We warn the readers of the hazards of working with explosives.

[1]  Samuel Kassahun Mamo,et al.  Development of a Molecularly Imprinted Polymer-Based Sensor for the Electrochemical Determination of Triacetone Triperoxide (TATP) , 2014, Sensors.

[2]  Mazyar Zeinali,et al.  Nanoporous organosilicas as preconcentration materials for the electrochemical detection of trinitrotoluene. , 2008, Analytical chemistry.

[3]  M. Möder,et al.  Ion-exchange molecularly imprinted polymer for the extraction of negatively charged acesulfame from wastewater samples. , 2015, Journal of chromatography. A.

[4]  M. Möder,et al.  Selective mixed-bed solid phase extraction of atrazine herbicide from environmental water samples using molecularly imprinted polymer. , 2014, Talanta.

[5]  Itamar Willner,et al.  Molecularly imprinted Au nanoparticles composites on Au surfaces for the surface plasmon resonance detection of pentaerythritol tetranitrate, nitroglycerin, and ethylene glycol dinitrate. , 2011, Analytical chemistry.

[6]  Guangtao Li,et al.  Theory and simulation of diffusion–adsorption into a molecularly imprinted mesoporous film and its nanostructured counterparts. Experimental application for trace explosive detection , 2014 .

[7]  Matthew J Linman,et al.  Selective detection of gas-phase TNT by integrated optical waveguide spectrometry using molecularly imprinted sol-gel sensing films. , 2007, Analytica chimica acta.

[8]  R. Galatus,et al.  Sensors based on surface plasmon resonance in a plastic optical fiber for the detection of trinitrotoluene , 2013 .

[9]  G. D’Agostino,et al.  Voltammetric platform for detection of 2,4,6-trinitrotoluene based on a molecularly imprinted polymer , 2013, Analytical and Bioanalytical Chemistry.

[10]  M. Roushani,et al.  Impedimetric detection of trinitrotoluene by using a glassy carbon electrode modified with a gold nanoparticle@fullerene composite and an aptamer-imprinted polydopamine , 2017, Microchimica Acta.

[11]  Zhong-Qun Tian,et al.  Ultrasensitive SERS detection of TNT by imprinting molecular recognition using a new type of stable substrate. , 2010, Chemistry.

[12]  Byoungho Lee,et al.  Overview of the Characteristics of Micro- and Nano-Structured Surface Plasmon Resonance Sensors , 2011, Sensors.

[13]  Hassan Fattahi,et al.  Selective chemiluminescence method for the determination of trinitrotoluene based on molecularly imprinted polymer-capped ZnO quantum dots , 2017 .

[14]  Shoufang Xu,et al.  Mesoporous structured MIPs@CDs fluorescence sensor for highly sensitive detection of TNT. , 2016, Biosensors & bioelectronics.

[15]  Haiyang Li,et al.  Detection of nitrobenzene compounds in surface water by ion mobility spectrometry coupled with molecularly imprinted polymers. , 2014, Journal of hazardous materials.

[16]  Daming Gao,et al.  Surface molecular self-assembly strategy for TNT imprinting of polymer nanowire/nanotube arrays. , 2006, Analytical chemistry.

[17]  Tianshu Zhou,et al.  Two-dimensional molecular imprinting approach for the electrochemical detection of trinitrotoluene , 2011 .

[18]  A. Martín‐Esteban.  Molecularly-imprinted polymers as a versatile, highly selective tool in sample preparation , 2013 .

[19]  M. Bowyer,et al.  Molecularly imprinted polymers (MIPs): sensing, an explosive new opportunity? , 2007, Organic & biomolecular chemistry.

[20]  Design and evaluation of split-ring resonators for aptamer-based biosensors , 2018 .

[21]  Jürgen Hürttlen,et al.  Gas phase detection of explosives such as 2,4,6-trinitrotoluene by molecularly imprinted polymers. , 2007, Analytica chimica acta.

[22]  Y. Yamini,et al.  Molecular-imprinted polymer extraction combined with dispersive liquid-liquid micro-extractionfor ultra-preconcentration of mononitrotoluene. , 2010, Journal of separation science.

[23]  Min Xue,et al.  Removal of 2,4,6‐Trinitrotoluene from “Pink Water” Using Molecularly‐Imprinted Absorbent , 2012 .

[24]  Taher Alizadeh,et al.  Preparation of magnetic TNT-imprinted polymer nanoparticles and their accumulation onto magnetic carbon paste electrode for TNT determination. , 2014, Biosensors & bioelectronics.

[25]  Shoufang Xu,et al.  Ratiometric fluorescence and mesoporous structure dual signal amplification for sensitive and selective detection of TNT based on MIP@QD fluorescence sensors. , 2015, Chemical communications.

[26]  Shoufang Xu,et al.  Dummy molecularly imprinted polymers-capped CdTe quantum dots for the fluorescent sensing of 2,4,6-trinitrotoluene. , 2013, ACS applied materials & interfaces.

[27]  Zhongpin Zhang,et al.  Molecularly imprinted shells from polymer and xerogel matrices on polystyrene colloidal spheres. , 2012, Chemistry.

[28]  Zi-hui Meng,et al.  Separation of 1,3,5,7-tetranitro-1,3,5,7-tetraazacyclooctane and 1,3,5-trinitro-1,3,5- triazacyclohexane by molecularly imprinted solid-phase extraction. , 2017, Journal of separation science.

[29]  Jingjing Dai,et al.  Molecularly imprinted polymers labeled with amino-functionalized carbon dots for fluorescent determination of 2,4-dinitrotoluene , 2017, Microchimica Acta.

[30]  Carmen Lazau,et al.  Towards developing an efficient sensitive element for trinitrotoluene detection: TiO 2 thin films functionalized with molecularly imprinted copolymer films , 2016 .

[31]  D. P. Campbell,et al.  Detection of vapor phase trinitrotoluene in the parts-per-trillion range using waveguide interferometry , 2010 .

[32]  Parviz Norouzi,et al.  A new molecularly imprinted polymer (MIP)-based electrochemical sensor for monitoring 2,4,6-trinitrotoluene (TNT) in natural waters and soil samples. , 2010, Biosensors & bioelectronics.

[33]  Itamar Willner,et al.  Imprinting of molecular recognition sites through electropolymerization of functionalized Au nanoparticles: development of an electrochemical TNT sensor based on pi-donor-acceptor interactions. , 2008, Journal of the American Chemical Society.

[34]  Weina Li,et al.  Hierarchically imprinted porous films for rapid and selective detection of explosives. , 2011, Langmuir : the ACS journal of surfaces and colloids.

[35]  R. Advíncula,et al.  Detection of 2,4-dinitrotoluene (DNT) as a model system for nitroaromatic compounds via molecularly imprinted short-alkyl-chain SAMs. , 2011, Langmuir : the ACS journal of surfaces and colloids.

[36]  Zi-hui Meng,et al.  Application of molecularly imprinted polymers for the solid-phase extraction of hexanitrohexaazaisowurtzitane (CL-20) from soil samples , 2016 .

[37]  Dimitra N. Stratis-Cullum,et al.  A Nanosensor for TNT Detection Based on Molecularly Imprinted Polymers and Surface Enhanced Raman Scattering , 2011, Sensors.

[38]  M. Möder,et al.  A new strategy for accelerated extraction of target compounds using molecularly imprinted polymer particles embedded in a paper‐based disk , 2018, Journal of molecular recognition : JMR.

[39]  Shubhra Gangopadhyay,et al.  Detection of nitroaromatic explosives using a fluorescent-labeled imprinted polymer. , 2010, Analytical chemistry.

[40]  M. Möder,et al.  Negative electrospray ionization ion mobility spectrometry combined with paper-based molecular imprinted polymer disks: A novel approach for rapid target screening of trace organic compounds in water samples. , 2018, Talanta.

[41]  V. Pichon,et al.  Selective extraction of nitroaromatic explosives by using molecularly imprinted silica sorbents , 2011, Analytical and bioanalytical chemistry.

[42]  Federica Bianchi,et al.  Solid-phase microextraction of 2,4,6-trinitrotoluene using a molecularly imprinted-based fiber , 2012, Analytical and Bioanalytical Chemistry.

[43]  M. Ganjali,et al.  A novel high selective and sensitive para-nitrophenol voltammetric sensor, based on a molecularly imprinted polymer-carbon paste electrode. , 2009, Talanta.

[44]  G. Wulff.  Molecular Imprinting in Cross‐Linked Materials with the Aid of Molecular Templates— A Way towards Artificial Antibodies , 1995 .

[45]  Karsten Haupt,et al.  Molecularly imprinted polymer nanomaterials and nanocomposites by controlled/living radical polymerization , 2016 .

[46]  P. Norouzi,et al.  Development of a voltammetric sensor based on a molecularly imprinted polymer (MIP) for caffeine measurement , 2010 .

[47]  I. Willner,et al.  Imprinted Au‐Nanoparticle Composites for the Ultrasensitive Surface Plasmon Resonance Detection of Hexahydro‐1,3,5‐trinitro‐1,3,5‐triazine (RDX) , 2010, Advanced materials.

[48]  Luigi Zeni,et al.  Sensitive detection of 2,4,6-trinitrotoluene by tridimensional monitoring of molecularly imprinted polymer with optical fiber and five-branched gold nanostars , 2015 .

[49]  Dirk Röseling,et al.  Trace Detection of Explosives Vapours by Molecularly Imprinted Polymers for Security Measures , 2009 .

[50]  Qingyuan Niu,et al.  Surface molecular-imprinting engineering of novel cellulose nanofibril/conjugated polymer film sensors towards highly selective recognition and responsiveness of nitroaromatic vapors. , 2013, Chemical communications.

[51]  M. Möder,et al.  A new strategy for synthesis of an in-tube molecularly imprinted polymer-solid phase microextraction device: selective off-line extraction of 4-nitrophenol as an example of priority pollutants from environmental water samples. , 2013, Analytica chimica acta.

[52]  Wlodzimierz Kutner,et al.  Simultaneous chronoamperometry and piezoelectric microgravimetry determination of nitroaromatic explosives using molecularly imprinted thiophene polymers. , 2013, Analytical chemistry.

[53]  M. Ganjali,et al.  Molecularly imprinted polymer nano-sphere/multi-walled carbon nanotube coated glassy carbon electrode as an ultra-sensitive voltammetric sensor for picomolar level determination of RDX. , 2019, Talanta.

[54]  Florence Chapuis-Hugon,et al.  Development of imprinted materials for the selective extraction of nitroaromatic explosives. , 2010, Journal of chromatography. A.

[55]  G. Shi,et al.  Composites of multiwalled carbon nanotubes/polyethyleneimine (MWCNTs/PEI) and molecularly imprinted polymers for dinitrotoluene recognition , 2016 .

[56]  I. Willner,et al.  Ultrasensitive surface plasmon resonance detection of trinitrotoluene by a bis-aniline-cross-linked Au nanoparticles composite. , 2009, Journal of the American Chemical Society.

[57]  H. Craig,et al.  Federal Facilities Forum Issue Field Sampling And Selecting On-site Analytical Methods For Explosives In Water , 1999 .

[58]  S. Asher,et al.  Visual detection of 2,4,6-trinitrotolune by molecularly imprinted colloidal array photonic crystal. , 2016, Journal of hazardous materials.

[59]  Liyi Shi,et al.  Electrochemical sensor prepared from molecularly imprinted polymer for recognition of TNT , 2015 .

[60]  Daming Gao,et al.  A surface functional monomer-directing strategy for highly dense imprinting of TNT at surface of silica nanoparticles. , 2007, Journal of the American Chemical Society.

[61]  G. Wulff.  Fourty years of molecular imprinting in synthetic polymers: origin, features and perspectives , 2013, Microchimica Acta.

[62]  Jian Wang,et al.  Simultaneous selective extraction of nitramine explosives using molecularly imprinted polymer hollow spheres from post blast samples , 2017 .

[63]  W. Kutner,et al.  Chemosensor for Selective Determination of 2,4,6-Trinitrophenol Using a Custom Designed Imprinted Polymer Recognition Unit Cross-Linked to a Fluorophore Transducer , 2016 .

[64]  Helko Borsdorf,et al.  Recent Developments in Ion Mobility Spectrometry , 2011 .

[65]  A. Walte,et al.  Sprayed liquid–gas extraction of semi-volatile organophosphate malathion from air and contaminated surfaces , 2018 .

[66]  Daming Gao,et al.  Molecular imprinting at walls of silica nanotubes for TNT recognition. , 2008, Analytical chemistry.

[67]  Xiao Dong,et al.  Colorimetric sensor arrays based on pattern recognition for the detection of nitroaromatic molecules. , 2017, Journal of hazardous materials.

[68]  S. Gangopadhyay,et al.  Comparison of molecular imprinted particles prepared using precipitation polymerization in water and chloroform for fluorescent detection of nitroaromatics. , 2011, Analytica chimica acta.

[69]  V. Pichon,et al.  Identification of the nitroaromatic explosives in post-blast samples by online solid phase extraction using molecularly imprinted silica sorbent coupled with reversed-phase chromatography , 2013, Analytical and Bioanalytical Chemistry.