An Adaptive Output Current Estimation Circuit for a Primary-Side Controlled LED Driver

A primary-side controlled method is commonly used in flyback LED driver to regulate output current by employing an auxiliary winding. However, owing to intrinsic propagation delay in real-world circuits, a primary-side controlled flyback converter experiences a worse line regulation. This paper proposes a smart output current estimation scheme to improve line regulation for constant on-time control, and it can be compatible with the current flyback topology. A 9.5-W prototype of the proposed flyback LED driver has been fabricated in Nuvoton Technology Corporation 0.6-μm 5-V/40-V CMOS process. The maximum switching frequency is set to around 100 kHz with universal-line input, single-stage power factor correction for LED lighting applications. Experimental results prove that the proposed scheme can improve the line regulation within 1.5% and the power efficiency can be up to 89.7%.

[1]  Xinbo Ruan,et al.  A Method of Reducing the Peak-to-Average Ratio of LED Current for Electrolytic Capacitor-Less AC–DC Drivers , 2010, IEEE Transactions on Power Electronics.

[2]  F.C. Lee,et al.  Common Mode EMI Noise Suppression for Bridgeless PFC Converters , 2008, IEEE Transactions on Power Electronics.

[3]  D.G. Lamar,et al.  A Very Simple Control Strategy for Power Factor Correctors Driving High-Brightness LEDs , 2009, IEEE Transactions on Power Electronics.

[4]  Claudio Adragna.  Primary-controlled high-PF flyback converters deliver constant dc output current , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[5]  Esther de Jódar,et al.  Optimizing the Design of Single-Stage Power-Factor Correctors , 2007, IEEE Transactions on Industrial Electronics.

[6]  Hulong Zeng,et al.  A Primary-Side Control Scheme for High-Power-Factor LED Driver With TRIAC Dimming Capability , 2012, IEEE Transactions on Power Electronics.

[7]  Xiaogao Xie,et al.  A Novel Output Current Estimation and Regulation Circuit for Primary Side Controlled High Power Factor Single-Stage Flyback LED Driver , 2012, IEEE Transactions on Power Electronics.

[8]  Shuo Wang,et al.  DM EMI Noise Prediction for Constant On-Time, Critical Mode Power Factor Correction Converters , 2012, IEEE Transactions on Power Electronics.

[9]  Tzuen-Lih Chern,et al.  Single-stage Flyback converter for constant current output LED driver with power factor correction , 2009, 2009 4th IEEE Conference on Industrial Electronics and Applications.

[10]  Dong-Soo Kim,et al.  A single stage flyback power supply unit for LED lighting applications , 2009, 2009 International Conference on Electrical and Electronics Engineering - ELECO 2009.

[11]  Zhaoji Li,et al.  A new flyback converter with primary side detection and peak current mode control , 2002, IEEE 2002 International Conference on Communications, Circuits and Systems and West Sino Expositions.

[12]  Ying-Yu Tzou,et al.  Digital primary-side sensing control for flyback converters , 2009, 2009 International Conference on Power Electronics and Drive Systems (PEDS).

[13]  N. Barry,et al.  Primary side control circuit of a flyback converter , 2001, APEC 2001. Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.01CH37181).

[14]  Hoi Lee,et al.  A constant power limit feedforward control circuit for flyback converters , 2006, Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06..

[15]  Xiaogao Xie,et al.  An optocouplerless two-stage high power factor LED driver , 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[16]  L. Huber,et al.  Single-stage single-switch input-current-shaping technique with reduced switching loss , 2000 .

[17]  M. Wendt,et al.  LEDs in Real Lighting Applications: from Niche Markets to General Lighting , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.

[18]  Dan Chen,et al.  An adaptive high-precision overpower protection scheme for primary-side controlled flyback converters , 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[19]  Zhu Feng,et al.  Primary side control circuit of a flyback converter for HBLED , 2010, The 2nd International Symposium on Power Electronics for Distributed Generation Systems.

[20]  Michael S. Shur,et al.  Solid-State Lighting: Toward Superior Illumination , 2005, Proceedings of the IEEE.

[21]  Wu Chen,et al.  Elimination of an Electrolytic Capacitor in AC/DC Light-Emitting Diode (LED) Driver With High Input Power Factor and Constant Output Current , 2012, IEEE Transactions on Power Electronics.

[22]  M. Pashley,et al.  Red, green, and blue LEDs for white light illumination , 2002 .

[23]  Qi Zheng,et al.  Constant current LED driver based on flyback structure with primary side control , 2011, 2011 IEEE Power Engineering and Automation Conference.

[24]  Giovanni Carraro.  Solving high-voltage off-line HB-LED constantcurrent contro-circuit issues , 2007, APEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition.

[25]  P.K.T. Mok,et al.  A monolithic current-mode CMOS DC-DC converter with on-chip current-sensing technique , 2004, IEEE Journal of Solid-State Circuits.

[26]  R. Redl,et al.  Design considerations for single-stage isolated power-factor-corrected power supplies with fast regulation of the output voltage , 1995, Proceedings of 1995 IEEE Applied Power Electronics Conference and Exposition - APEC'95.

[27]  R. Redl.  An economical single-phase passive power-factor-corrected rectifier: topology, operation, extensions, and design for compliance , 1998, APEC '98 Thirteenth Annual Applied Power Electronics Conference and Exposition.

[28]  H. Matsuo,et al.  An LED Drive Circuit with Constant-Output-Current Control and Constant-Luminance Control , 2006, INTELEC 06 - Twenty-Eighth International Telecommunications Energy Conference.