Characterization of laser-induced photoexcitation effect on a surrounding CMOS ring oscillator
暂无分享,去创建一个
The use of laser trimming techniques with conventional CMOS processes requires thorough understanding of the electrical consequences of a laser pulse on surrounding sensitive devices. A study on the laser-induced photoexcitation effect on a ring-oscillator has been performed. Experiments are performed with a laser beam focused on a diffusible resistor made of a n-doped gap between two highly p-doped regions. An in-situ characterization technique has been used to get the laser's power profile under dielectric layers. A novel frequency-monitoring circuit is presented. It has been manufactured in 0.18 /spl mu/m CMOS technology and experimental results are presented. It has been measured that the laser causes a 28% change of the oscillating frequency. An approach to model the photoexcitation effect using combined electrical and physical simulations is presented.
[1] B. Streetman. Solid state electronic devices , 1972 .
[2] A. Kestenbaum,et al. Photoexcitation Effects During Laser Trimming of Thin-Film Resistors on Silicon , 1980 .
[3] E. J. Swenson,et al. Reducing photoelectric response when functionally trimming with lasers , 2002, Proc. IEEE.
[4] Yvon Savaria,et al. A novel laser trimming technique for microelectronics , 2002 .
[5] D. Parker,et al. Polysilicon resistor trimming by laser link making , 1990 .