Nanostructure Evolution of Reticular Nano-Tib Whiskers Reinforced Titanium Matrix Composite Subjected to Ultrasonic Shot Peening

[1]  X. Wang,et al.  Gradient microstructure and foreign-object-damaged fatigue properties of Ti6Al4V titanium alloy processed by the laser shock peening and subsequent shot peening , 2022, Materials Science and Engineering: A.

[2]  Lu-jun Huang,et al.  Overcoming the strength-ductility trade-off dilemma in TiBw/TC18 composites via network architecture with trace reinforcement , 2022, Materials Science and Engineering: A.

[3]  Shuo Xu,et al.  Residual stress and microhardness evolution induced by conventional and ultrasonic shot peening , 2022, Materials Science and Technology.

[4]  J. Gibmeier,et al.  Review on study of internal load transfer in metal matrix composites using diffraction techniques , 2022, Materials Science and Engineering: A.

[5]  Lu-jun Huang,et al.  Insights into in-situ TiB/dual-phase Ti alloy interface and its high load-bearing capacity , 2022, Journal of Materials Science & Technology.

[6]  M. Dargusch,et al.  High strength and ductility of titanium matrix composites by nanoscale design in selective laser melting , 2022, Journal of Materials Science & Technology.

[7]  Yuanfei Han,et al.  Configuration of new fiber-like structure driven high matching of strength-ductility in TiB reinforced titanium matrix composites , 2022, Composites Part B: Engineering.

[8]  L. Wang,et al.  The effect of TiC on microstructure and mechanical properties of Ti-5553 beta phase titanium alloy , 2022, Materials & Design.

[9]  Jia Liu,et al.  Surface modification and twinning behavior in gradient graphene-based TiC/Ti6Al4V composite , 2022, Applied Surface Science.

[10]  E. Fereiduni,et al.  Microstructural characterization and mechanical properties of nano-scale/sub-micron TiB-reinforced titanium matrix composites fabricated by laser powder bed fusion , 2021, Journal of Alloys and Compounds.

[11]  Hongmei Zhang,et al.  Breaking through the dynamic strength-ductility trade-off in TiB reinforced Ti composites by incorporation of graphene nanoplatelets , 2021, Composites Part B: Engineering.

[12]  Ting Wang,et al.  An innovative TiB whisker architecture of titanium matrix composite devised by scanning electron beam remodeling , 2021, Journal of Alloys and Compounds.

[13]  F. Toptan,et al.  Preliminary tribo-electrochemical and biological responses of the Ti-TiB-TiCx in-situ composites intended for load-bearing biomedical implants , 2021, Journal of Alloys and Compounds.

[14]  S. Luo,et al.  Fatigue strength improvement in Ti-6Al-4V subjected to foreign object damage by combined treatment of laser shock peening and shot peening , 2021, International Journal of Fatigue.

[15]  E. Maleki,et al.  Effects of conventional shot peening, severe shot peening, re-shot peening and precised grinding operations on fatigue performance of AISI 1050 railway axle steel , 2021, International Journal of Fatigue.

[16]  Chun-zhi Li,et al.  Effect of ultrasonic shot peening on surface integrity and fatigue performance of single-crystal superalloy , 2021 .

[17]  S. Mandal,et al.  Enhanced corrosion resistance of the surface modified Ti-13Nb-13Zr alloy by ultrasonic shot peening , 2021 .

[18]  K. Luo,et al.  Effects of laser shock peening on microstructural evolution and wear property of laser hybrid remanufactured Ni25/Fe104 coating on H13 tool steel , 2021 .

[19]  Liqiang Wang,et al.  Effects of shot peening on microstructure evolution and mechanical properties of surface nanocrystal layer on titanium matrix composite , 2021 .

[20]  Huaiju Liu,et al.  Effect of shot peening intensity on surface integrity of 18CrNiMo7-6 steel , 2021 .

[21]  Yuanfei Han,et al.  Embedding boron into Ti powder for direct laser deposited titanium matrix composite: Microstructure evolution and the role of nano-TiB network structure , 2021 .

[22]  B. Chen,et al.  Super-high-strength graphene/titanium composites fabricated by selective laser melting , 2021 .

[23]  S. Bagherifard,et al.  The effects of shot peening, laser shock peening and ultrasonic nanocrystal surface modification on the fatigue strength of Inconel 718 , 2021 .

[24]  P. Withers,et al.  Depth-profiling of residual stress and microstructure for austenitic stainless steel surface treated by cavitation, shot and laser peening , 2021, Materials Science and Engineering: A.

[25]  M. Zhang,et al.  Balance of strength and plasticity of additive manufactured Ti-6Al-4V alloy by forming TiB whiskers with cyclic gradient distribution , 2021 .

[26]  Junbiao Wang,et al.  Effect of ultrasonic shot peening on microstructure evolution and corrosion resistance of selective laser melted Ti–6Al–4V alloy , 2021 .

[27]  Q. Shen,et al.  Microstructure and strengthening mechanism of boride in-situ reinforced titanium matrix composites prepared by plasma activated sintering , 2021, Ceramics International.

[28]  Y. Jiao,et al.  Microstructure refinement and strengthening mechanisms of network structured TiBw/Ti6Al4V composites by TIG remelting , 2021 .

[29]  A. Amanov,et al.  Effects of constrained groove pressing, severe shot peening and ultrasonic nanocrystal surface modification on microstructure and mechanical behavior of S500MC high strength low alloy automotive steel , 2021 .

[30]  Pawan Kumar,et al.  Effect of boron addition on microstructure, hardness and wear performance of Ti-6Al-4 V alloy manufactured by laser powder bed fusion additive manufacturing , 2021, Materials Characterization.

[31]  Y. G. Liu,et al.  Further refinement mechanisms of nanograins in nanocrystalline surface layer of TC17 subjected to severe plastic deformation , 2021 .

[32]  M. Guagliano,et al.  Microstructure evolution and residual stress distribution of nanostructured Mg-8Gd-3Y alloy induced by severe shot peening , 2020 .

[33]  Zhiguang Zhou,et al.  Microstructure evolution and mechanical properties of in-situ Ti6Al4V–TiB composites manufactured by selective laser melting , 2020 .

[34]  S. Bagherifard,et al.  Effect of warm shot peening treatments on surface properties and corrosion behavior of AZ31 magnesium alloy , 2020 .

[35]  G. Wang,et al.  Underwater Additive Manufacturing of Ti-6Al-4V Alloy by Laser Metal Deposition: Formability, Gran Growth and Microstructure Evolution , 2020 .

[36]  H. Xue,et al.  Effect of surface mechanical attrition treatment on high cycle and very high cycle fatigue of a 7075-T6 aluminium alloy , 2020, International Journal of Fatigue.

[37]  F. Pan,et al.  A study of the corrosion behavior of AZ31 Mg alloy in depth direction after surface nanocrystallization , 2020 .

[38]  Y. G. Liu,et al.  Roles for shot dimension, air pressure and duration in the fabrication of nanocrystalline surface layer in TC17 alloy via high energy shot peening , 2020 .

[39]  Rui Zhang,et al.  Multiscale Architecture and Superior High‐Temperature Performance of Discontinuously Reinforced Titanium Matrix Composites , 2020, Advanced materials.

[40]  J. Ferreira,et al.  Effect of bead characteristics on the fatigue life of shot peened Al 7475-T7351 specimens , 2020 .

[41]  Y. G. Liu,et al.  Characteristics and formation mechanisms of defects in surface layer of TC17 subjected to high energy shot peening , 2020, Applied Surface Science.

[42]  S. Qu,et al.  Microstructure evolution and damage mechanism of layered titanium matrix composites under tensile loading , 2020 .

[43]  Zhihua Yang,et al.  Microstructure evolution and mechanical properties of selective laser melted bulk-form titanium matrix nanocomposites with minor B4C additions , 2020 .

[44]  M. Bermingham,et al.  Effects of boron addition on microstructures and mechanical properties of Ti-6Al-4V manufactured by direct laser deposition , 2019 .

[45]  Xin Lin,et al.  Influence of trace boron addition on microstructure, tensile properties and their anisotropy of Ti6Al4V fabricated by laser directed energy deposition , 2019, Materials & Design.

[46]  Y. Jiao,et al.  Strengthening and plasticity improvement mechanisms of titanium matrix composites with two-scale network microstructure , 2019, Powder Technology.

[47]  Ni Ao,et al.  On the influence of ultrasonic surface rolling process on surface integrity and fatigue performance of Ti-6Al-4V alloy , 2019, Surface and Coatings Technology.

[48]  Xin Lin,et al.  Effect of stress-relief annealing on anodic dissolution behaviour of additive manufactured Ti-6Al-4V via laser solid forming , 2019, Corrosion Science.

[49]  M. Hayat,et al.  Titanium metal matrix composites: An overview , 2019, Composites Part A: Applied Science and Manufacturing.

[50]  C. Yan,et al.  In-situ TiB/Ti-6Al-4V composites with a tailored architecture produced by hot isostatic pressing: Microstructure evolution, enhanced tensile properties and strengthening mechanisms , 2019, Composites Part B: Engineering.

[51]  Matthew S. Dargusch,et al.  Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing , 2019, Acta Materialia.

[52]  Ni Ao,et al.  Surface nanocrystallization of body-centered cubic beta phase in Ti–6Al–4V alloy subjected to ultrasonic surface rolling process , 2019, Surface and Coatings Technology.

[53]  Ni Ao,et al.  Gradient nanostructure evolution and phase transformation of α phase in Ti-6Al-4V alloy induced by ultrasonic surface rolling process , 2019, Materials Science and Engineering: A.

[54]  Yingang Liu,et al.  Structure response characteristics and surface nanocrystallization mechanism of alpha phase in Ti-6Al-4V subjected to high energy shot peening , 2019, Journal of Alloys and Compounds.

[55]  J. Zhou,et al.  Comparative study of the effects of surface mechanical attrition treatment and conventional shot peening on low cycle fatigue of a 316L stainless steel , 2018, Surface and Coatings Technology.

[56]  M. Bermingham,et al.  Effect of trace lanthanum hexaboride and boron additions on microstructure, tensile properties and anisotropy of Ti-6Al-4V produced by additive manufacturing , 2018 .

[57]  Hui Wang,et al.  Laser deposition-additive manufacturing of TiB-Ti composites with novel three-dimensional quasi-continuous network microstructure: Effects on strengthening and toughening , 2018 .

[58]  Chuanhai Jiang,et al.  Surface layer characteristics of CNT/Al–Mg–Si alloy composites treated by stress peening , 2017 .

[59]  H. Hu,et al.  High temperature mechanical properties of as-extruded TiBw/Ti60 composites with ellipsoid network architecture , 2016 .

[60]  Y. G. Liu,et al.  Surface nanocrystallization and gradient structure developed in the bulk TC4 alloy processed by shot peening , 2016 .

[61]  Y. Ikuhara,et al.  Direct observation of individual dislocation interaction processes with grain boundaries , 2016, Science Advances.

[62]  Ming Chen,et al.  Residual stress and microstructure of the CNT/6061 composite after shot peening , 2016 .

[63]  Yan Liu,et al.  Stress-induced twinning of nanocrystalline hexagonal close-packed titanium in Ti-6Al-4V , 2016 .

[64]  Ruirui Li,et al.  A mechanism study on characteristic curve of residual stress field in Ti–6Al–4V induced by wet peening treatment , 2015 .

[65]  Miaoquan Li,et al.  The gradient crystalline structure and microhardness in the treated layer of TC17 via high energy shot peening , 2015 .

[66]  S. Xiao,et al.  Influence of (TiC+TiB) on the microstructure and tensile properties of Ti-B20 matrix alloy , 2015 .

[67]  Xueyan Wu,et al.  Surface Modification of 304 Steel Using Triple-Step Shot Peening , 2015 .

[68]  Z. Du,et al.  Effects of trace TiB and TiC on microstructure and tensile properties of β titanium alloy , 2014 .

[69]  Zhi-you Li,et al.  EBSD characterization of twinning in cold-rolled CP-Ti , 2013 .

[70]  P. Trimby,et al.  Grain size effect on deformation twinning propensity in ultrafine-grained hexagonal close-packed titanium , 2013 .

[71]  S. M. Srinivasan,et al.  Numerical simulation of Almen strip response due to random impacts with strain-rate effects , 2011 .

[72]  J. Komotori,et al.  Effect of micro ploughing during fine particle peening process on the microstructure of metallic materials , 2009 .

[73]  X. Wu,et al.  Deformation kinetics during dwell fatigue , 2007 .

[74]  H. Fan,et al.  Zener–Stroh crack at the interface of multi-layered structures , 2005 .

[75]  Jian Lu,et al.  Nanostructure formation mechanism of α-titanium using SMAT , 2004 .

[76]  D. StJohn,et al.  A model of grain refinement incorporating alloy constitution and potency of heterogeneous nucleant particles , 2001 .

[77]  K. Schiffner,et al.  Simulation of residual stresses by shot peening , 1999 .

[78]  V. Racherla,et al.  Effect of laser shock peening on microstructural, mechanical and corrosion properties of laser beam welded commercially pure titanium , 2021 .

[79]  Y. G. Liu,et al.  Nanostructure and surface roughness in the processed surface layer of Ti-6Al-4V via shot peening , 2017 .

[80]  Miaoquan Li,et al.  Characterization of surface layer in TC17 alloy treated by air blast shot peening , 2015 .