Challenges in light metals production

Abstract Light metals have great potential for application in the automotive and aerospace industries because of their excellent physical properties. The usage of aluminium, titanium and magnesium is limited by relatively high costs of production, associated energy costs and large ecological footprint. In the case of aluminium, significant improvement to the Hall–Héroult process is still achievable through advances in cell design, materials and process control. Alternative production processes, including carbothermic reduction and low temperature routes are also possible. Magnesium and titanium production are currently dominated by batch metallothermic processes and new process routes are required to develop these industries. Research at CSIRO, through the Light Metals Flagship, is currently focused on step change improvements in the production of light metals, aiming at lowering energy usage, increasing productivity and reducing the overall environmental impact. In the present paper, the overall status of the existing technologies will be described, highlighting areas that are being developed around the world and at CSIRO.

[1]  Geoffrey Brooks,et al.  The carbothermic route to magnesium , 2006 .

[2]  D. StJohn,et al.  The corrosion performance of magnesium alloy AM-SC1 in automotive engine block applications , 2005 .

[3]  B. Myhre.  The iron age , 2003 .

[4]  A. R. Burkin,et al.  Production of aluminium and alumina , 1987 .

[5]  E. F. Emley.  Principles of magnesium technology , 1966 .

[6]  Geoffrey Brooks,et al.  The physical chemistry of the carbothermic route to magnesium , 2006 .

[7]  J. N. Bruggeman,et al.  Wettable Ceramic-Based Drained Cathode Technology for Aluminum Electrolysis , 2003 .

[8]  Gill Thomson.  Considerations in vacuum pump suitability , 2002 .

[9]  S. Fox,et al.  Newly developed titanium alloy sheets for the exhaust systems of motorcycles and automobiles , 2004 .

[10]  P. Koltun,et al.  Global warming impact of the magnesium produced in China using the Pidgeon process , 2004 .

[11]  F. Froes.  Titanium and other light metals: Let’s do something about cost , 1998 .

[12]  Monica Cariola,et al.  A high-potential sector: titanium metal: Oligopolistic policies and technological constraints as main limits to its development , 1999 .

[13]  R. N. Anderson,et al.  Carbothermic reduction of refractory metals , 1976 .

[14]  C. Eckert,et al.  Thermodynamic activity of magnesium in several highly-solvating liquid alloys , 1983 .

[15]  Dimitrios I. Gerogiorgis,et al.  Light Metals 2003 , 2003 .

[16]  Alan Donaldson,et al.  Rapid plasma quenching for the production of ultrafine metal and ceramic powders , 2005 .

[17]  相馬 胤和,et al.  Mining and Metallurgical Practices in Australasia, J. T. Woodcock, The Australasian Institute of Mining and Metallurgy , 1981 .

[18]  A. M. Cameron,et al.  Magnesium production by plasma-powered processing , 1990 .

[19]  D. Yoerger,et al.  Iron Age , 2002 .

[20]  D. Sadoway,et al.  The chemistry and electrochemistry of magnesium production , 1987 .

[21]  Subagyo,et al.  Energy considerations for alternative routes in metals production , 2002 .

[22]  K. Grjotheim,et al.  Aluminium electrolysis : fundamentals of the Hall-Héroult process , 1982 .

[23]  Fathi Habashi,et al.  Handbook of extractive metallurgy , 1997 .

[24]  D. Inman.  Advances in Molten Salt Chemistry 6 : Edited by G. Mamantov, C. B. Mamantov and J. Braunstein Elsevier, 1987, 350 pp. Dfl. 295.00 , 1989 .

[25]  W J Rankin,et al.  The role of metals in sustainable development , 2002 .

[26]  Joseph,et al.  From Light Metals 2001 , 2022 .