On the dynamics of a capacitive electret-based micro-cantilever for energy harvesting

Abstract In this paper, an electret-based capacitive energy harvesting device with out-of-plane gap closing scheme has been modeled and analyzed. The device is composed of a micro cantilever and a substrate which form a variable capacitor that is in series with a resistance. An electret material is used to provide the bias voltage which is needed in capacitive energy harvesters in order to scavenge energy from ambient vibration. The ambient vibration is applied to the system as a harmonic base excitation. The motion equations and the corresponding boundary conditions are derived using Hamilton's principle based on Euler-Bernoulli beam theory, and the Kirchhoff's voltage law is employed to couple the mechanical and electrical domains. The electro-mechanical governing equations are discretized using Galerkin procedure and integrated numerically over time. In order to verify the derived formulation, an energy conservation approach is employed in the free oscillation of the device. The stability of the system in the electrostatic field is examined in both static and dynamic cases. By investigating the behavior of the system in free oscillations, the resistance is found to affect the behavior of the micro-cantilever as a damper with a Lorentzian variation, with the maximum equivalent damping coefficient corresponding to the resistance of 100 MΩ. The performance of the energy harvester in the presence of ambient vibrations is evaluated based on the frequency response of the device, and the effect of various parameter as investigated on the device performance, among which the resistance appears to have the most dominant effect on the system. It is found that in low resistances, the micro-cantilever exhibit a softening behavior due to the large electrostatic pressure acting on it, however, by increasing the resistance, the frequency response of the system becomes linear. Besides, the resistance affects the amplitude of the micro-cantilever due to its damping effect. For the case studied here, a theoretical harvested power in the order of 1 μW is harvested by the device for a frequency of 2.5 MHz and the electret surface voltage of 180 V. Of course, by adjusting the physical properties, the device can be fitted for the needs of the target application.

[1]  O. Paul,et al.  Electret-based Out-Of-Plane Micro Energy Harvester with Parylene-C Serving as the Electret and Spring Material , 2015 .

[2]  Kensuke Kanda,et al.  Energy Estimation for Electret Harvester with Nonlinear Spring , 2017 .

[3]  Einar Halvorsen,et al.  Simulation of an electrostatic energy harvester at large amplitude narrow and wide band vibrations , 2008, 2008 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS.

[4]  Y. Tai,et al.  Arrayed liquid rotor electret power generator systems , 2005, 18th IEEE International Conference on Micro Electro Mechanical Systems, 2005. MEMS 2005..

[5]  Nobuhide Kasagi,et al.  Large-amplitude MEMS electret generator with nonlinear spring , 2010, 2010 IEEE 23rd International Conference on Micro Electro Mechanical Systems (MEMS).

[6]  S. Boisseau,et al.  Cantilever-based electret energy harvesters , 2011 .

[7]  Erik Vilain Thomsen,et al.  Fabrication and characterization of MEMS-based PZT/PZT bimorph thick film vibration energy harvesters , 2012 .

[8]  Eric M. Yeatman,et al.  Micro Energy Harvesting , 2015 .

[9]  Fei Wang,et al.  Electret based micro energy harvesting device with both broad bandwidth and high power density from optimal air damping , 2017, 2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS).

[10]  Steve Beeby,et al.  Energy Harvesting Systems: Principles, Modeling and Applications , 2010 .

[11]  K. Najafi,et al.  An electromagnetic micro power generator for low-frequency environmental vibrations , 2004, 17th IEEE International Conference on Micro Electro Mechanical Systems. Maastricht MEMS 2004 Technical Digest.

[12]  Y. Tai,et al.  Iop Publishing Journal of Micromechanics and Microengineering Parylene-based Electret Power Generators , 2022 .

[13]  Paul K. Wright,et al.  A piezoelectric vibration based generator for wireless electronics , 2004 .

[14]  Robert Puers,et al.  Characterisation of an Electrostatic Vibration Harvester , 2008, ArXiv.

[15]  Saibal Roy,et al.  A micro electromagnetic generator for vibration energy harvesting , 2007 .

[16]  Y. Naruse,et al.  Electrostatic micro power generation from low-frequency vibration such as human motion , 2009 .

[17]  Mohammad Taghi Ahmadian,et al.  Static pull-in analysis of microcantilevers based on the modified couple stress theory , 2011 .

[18]  Ali Ghodsi,et al.  A conceptual study on the dynamics of a piezoelectric MEMS (Micro Electro Mechanical System) energy harvester , 2016 .

[19]  Fei Wang,et al.  Electrostatic energy harvesting device with out-of-the-plane gap closing scheme , 2013, International Conference on Solid-State Sensors, Actuators and Microsystems.

[20]  Ali H. Nayfeh,et al.  Dynamic pull-in phenomenon in MEMS resonators , 2007 .

[21]  Yen Kheng Tan,et al.  Energy Harvesting Autonomous Sensor Systems: Design, Analysis, and Practical Implementation , 2013 .

[22]  S. Husa,et al.  An electrostatic energy harvester with electret bias , 2009, TRANSDUCERS 2009 - 2009 International Solid-State Sensors, Actuators and Microsystems Conference.

[23]  Xiao Hu,et al.  Design and implementation of an out-of-plane electrostatic vibration energy harvester with dual-charged electret plates , 2015 .

[24]  Fei Wang,et al.  An electret-based energy harvesting device with a wafer-level fabrication process , 2013 .

[25]  N. Elvin,et al.  Advances in energy harvesting methods , 2013 .

[26]  Ghader Rezazadeh,et al.  Tuning the primary resonances of a micro resonator, using piezoelectric actuation , 2014 .

[27]  Peter Spies,et al.  Handbook of Energy Harvesting Power Supplies and Applications , 2015 .

[28]  Lei Jin,et al.  Electret Length Optimization of Output Power for Double-End Fixed Beam Out-of-Plane Electret-Based Vibration Energy Harvesters , 2017 .

[29]  Xiao Hu,et al.  A three-dimensional electret-based micro power generator for low-level ambient vibrational energy harvesting , 2014 .

[30]  F. Peano,et al.  Design and optimization of a MEMS electret-based capacitive energy scavenger , 2005, Journal of Microelectromechanical Systems.

[31]  N. Kasagi,et al.  Seismic Power Generator Using High-Performance Polymer Electret , 2006, 19th IEEE International Conference on Micro Electro Mechanical Systems.

[32]  M. Younis.  MEMS Linear and Nonlinear Statics and Dynamics , 2011 .