论文信息 - Aspects of minimizing steel corrosion in liquid lead-alloys by addition of oxygen

Aspects of minimizing steel corrosion in liquid lead-alloys by addition of oxygen

Abstract Minimizing steel corrosion in liquid lead-alloys by addition of oxygen requires devices for efficient oxygen transfer and reliable oxygen sensors. The accuracy of electrochemical oxygen sensors is analyzed using theoretical considerations and results from experiments in stagnant lead–bismuth eutectic (LBE). Additionally, the feasibility of gas/liquid oxygen-transfer and the long-term performance of electrochemical sensors in flowing liquid metal are addressed on the basis of the operating experience of the CORRIDA loop, a facility for testing steels in flowing LBE.

[1] Carsten Schroer,et al. Quantification of the Long-Term Performance of Steels T91 and 316L in Oxygen-Containing Flowing Lead-Bismuth Eutectic at 550°C , 2010 .

[2] R. N. Blumenthal,et al. Electronic Transport in 8 Mole Percent Y[sub 2]O[sub 3]-ZrO[sub 2] , 1989 .

[3] P. N. Martynov,et al. Designing Mass Exchangers for Control of Oxygen Content in Pb-Bi (Pb) Coolants in Various Research Facilities , 2009 .

[4] H. Muscher,et al. Oxygen measurements in stagnant lead–bismuth eutectic using electrochemical sensors , 2004 .

[5] J. Wilson,et al. The Solubilities of Several Transition Metals in Liquid Lead-Bismuth Eutectic , 1970 .

[6] A. J. Romano,et al. Liquidus Curves and Corrosion of Fe, Ti, Zr, and Cu in Liquid Bi-Pb Alloys , 1969 .

[7] G. P. Karzov,et al. Structural materials for atomic reactors with liquid metal heat-transfer agents in the form of lead or lead—Bismuth alloy , 1999 .

[8] H. Muscher,et al. Development of oxygen meters for the use in lead–bismuth , 2001 .

[9] J.-L. Courouau,et al. Electrochemical oxygen sensors for on-line monitoring in lead–bismuth alloys: status of development , 2004 .

[10] Tomohiro Furukawa,et al. Oxidation behaviour of P122 and a 9Cr–2W ODS steel at 550°C in oxygen-containing flowing lead–bismuth eutectic , 2010 .

[11] Olaf Wedemeyer,et al. Gas/liquid oxygen-transfer to flowing lead alloys , 2011 .