Three-dimensional fractal analysis of fracture surfaces in titanium–iron particulate reinforced hydroxyapatite composites: relationship between fracture toughness and fractal dimension

Fractal dimension has been considered as a measure of fracture surface roughness of materials. Three-dimensional (3D) surface analysis is anticipated to provide a better evaluation of fracture surface toughness and fractal dimension. The objective of this study was to quantify the fracture surfaces and identify a potential relationship between fracture toughness and fractal dimension in a new type of core–shell titanium–iron particulate reinforced hydroxyapatite matrix composites using SEM stereoscopy coupled with a 3D surface analysis. The obtained results showed that both fracture surface roughness and fractal dimension increased with increasing amount of core–shell Ti–Fe reinforcing particles. The fractal dimension was observed to be a direct measure of fracture surface roughness. The fracture toughness of the composites increased linearly with the square root of fractal dimensional increment (i.e., followed the Mecholsky–Mackin equation well) due to the presence of Ti–Fe particles along with the effect of porosity in brittle materials. The 3D fractal analysis was suggested to be a proper tool for quantifying the fracture surfaces and linking the microstructural parameter to fracture toughness.

[1]  H. Ru,et al.  Toughening mechanisms in iron-containing hydroxyapatite/titanium composites. , 2010, Biomaterials.

[2]  H. Tsai,et al.  Thermotropic liquid crystalline copolyesters of poly(butylene terephthalate) and p-hydroxybenzoic acid , 1989 .

[3]  Edmondo Battista,et al.  Cells preferentially grow on rough substrates. , 2010, Biomaterials.

[4]  Geometrical analysis and pattern recognition using mapping technologies of three-dimensional fracture surfaces in materials , 2005 .

[5]  G. Aeppli,et al.  Scale-free structural organization of oxygen interstitials in La2CuO4+y , 2010, Nature.

[6]  R. M. Cannon,et al.  The Utility of R‐Curves for Understanding Fracture Toughness‐Strength Relations in Bridging Ceramics , 2008 .

[7]  R. Ritchie,et al.  Determining the toughness of ceramics from Vickers indentations using the crack-opening displacements: An experimental study , 2002 .

[8]  Litian Wang,et al.  The relationship between superconductivity and microstructure through the fractal dimensions in Y-Ba-Cu-O compounds , 1988 .

[9]  Ralph Gomory.  Benoît Mandelbrot (1924–2010) , 2010, Nature.

[10]  Alberto Carpinteri,et al.  Three-dimensional fractal analysis of concrete fracture at the meso-level , 1999 .

[11]  P Meakin,et al.  Models for Material Failure and Deformation , 1991, Science.

[12]  B. Inkson,et al.  3D analysis of crack morphologies in silicate glass using FIB tomography , 2009 .

[13]  Hongwei Zhou,et al.  Direct Estimation of the Fractal Dimensions of a Fracture Surface of Rock , 2003 .

[14]  Alberto Carpinteri,et al.  A unified fractal approach for the interpretation of the anomalous scaling laws in fatigue and comparison with existing models , 2009 .

[15]  D. W. Schaefer,et al.  Polymers, Fractals, and Ceramic Materials , 1989, Science.

[16]  J. J. Mecholsky,et al.  The fractal geometry of Si3N4 wear and fracture surfaces , 1997 .

[17]  Failure analysis of clinically failed all-ceramic fixed partial dentures using fractal geometry. , 2009, Dental materials : official publication of the Academy of Dental Materials.

[18]  Ji‐Zhao Liang,et al.  A fractal model of tensile fracture surfaces for particulate‐filled polymer composites , 2008 .

[19]  Benoit B. Mandelbrot,et al.  Fractal Analysis and Synthesis of Fracture Surface Roughness and Related Forms of Complexity and Disorder , 2006 .

[20]  Fractal Analysis and Fractography: What Can we Learn that’s New? , 2009 .

[21]  J. Runt,et al.  Fractal analysis of polystyrene fracture surfaces , 1989 .

[22]  B. Mandelbrot,et al.  Fractal character of fracture surfaces of metals , 1984, Nature.

[23]  J. Zaanen,et al.  High-temperature superconductivity: The benefit of fractal dirt , 2010, Nature.

[24]  Fractal characteristics of dendrite and cellular structure in nickel–based superalloy at intermediate cooling rate , 2001 .

[25]  Kouji Adachi,et al.  Fractal parameters of individual soot particles determined using electron tomography: Implications for optical properties , 2007 .

[26]  Andrea Spagnoli,et al.  Fractality in the threshold condition of fatigue crack growth: an interpretation of the Kitagawa diagram , 2004 .

[27]  J. J. Mecholsky.  Estimating theoretical strength of brittle materials using fractal geometry , 2006 .

[28]  Fractal analysis of fracture surfaces in ceramic materials , 1998 .

[29]  Maxence Bigerelle,et al.  Fractals and fracture , 1998 .

[30]  M. Ramos,et al.  Fractal geometry of fracture surfaces of a duplex stainless steel , 2006 .

[31]  J. J. Mecholsky,et al.  Quantitative Analysis of Brittle Fracture Surfaces Using Fractal Geometry , 1989 .

[32]  K. Balani,et al.  Fractal model for estimating fracture toughness of carbon nanotube reinforced aluminum oxide , 2010 .

[33]  G. Stachowiak,et al.  Directional fractal signature analysis of trabecular bone: Evaluation of different methods to detect early osteoarthritis in knee radiographs , 2009, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[34]  B. Super,et al.  Fracture surface examination of dental ceramics using fractal analysis. , 2005, Dental materials : official publication of the Academy of Dental Materials.

[35]  G. Henebry,et al.  Fractal signature and lacunarity in the measurement of the texture of trabecular bone in clinical CT images. , 2001, Medical engineering & physics.

[36]  Fractal Dimension of Grain-boundary Fracture for Characterization of High-temperature Fracture in Heat-resistant Alloys , 2009 .

[37]  The effect of contour angle on fractal dimension measurements for brittle materials , 2001 .

[38]  K. Khor,et al.  Microstructure and mechanical properties of spark plasma sintered zirconia-hydroxyapatite nano-composite powders , 2005 .

[39]  A. Gatto.  Critical evaluation of indentation fracture toughness measurements with Vickers indenter on ceramic matrix composite tools , 2006 .

[40]  P. Kotowski,et al.  Fractal dimension of metallic fracture surface , 2006 .

[41]  J. J. Mecholsky,et al.  Fractal analysis of fracture in Ocala chert , 1988 .

[42]  J. Holloway,et al.  Elastic constants, Vickers hardness, and fracture toughness of fluorrichterite-based glass-ceramics. , 2004, Dental materials : official publication of the Academy of Dental Materials.

[43]  M. Fiszman,et al.  A single-cell model to study changes in neuronal fractal dimension. , 2001, Methods.

[44]  Mechanical breakdown of trabecular bone: Dependence on microstructure , 2007 .

[45]  Z. G. Wang,et al.  Relationship between fractal dimension and fatigue threshold value in dual-phase steels , 1988 .

[46]  Christopher A. Brown,et al.  Effect of surface topography on color and gloss of chocolate samples , 2006 .

[47]  Fractal nature and quantitative evaluation of microstructures in metallic materials , 1995, Journal of Materials Science.

[48]  Relations between the creep-rupture properties and the fractal dimension of three-dimensional fracture surface in a cobalt-base alloy , 2006 .

[49]  Christopher A. Brown,et al.  Scale-based correlations of relative areas with fracture of chocolate , 2009 .

[50]  Yihu Song,et al.  Fracture surface characteristics and impact properties of poly(butylene terephthalate) , 2009 .

[51]  D Chappard,et al.  Image analysis measurements of roughness by texture and fractal analysis correlate with contact profilometry. , 2003, Biomaterials.

[52]  T. Fett,et al.  Influence of narrow starter notches on the initial crack growth resistance curve of ceramics , 2006 .

[53]  I. Denry,et al.  Comparison of three fracture toughness testing techniques using a dental glass and a dental ceramic. , 1998, Dental materials : official publication of the Academy of Dental Materials.

[54]  S. Puzzi,et al.  Strength vs. toughness optimization of microstructured composites , 2009 .

[55]  R. O. Ritchie,et al.  The dentin–enamel junction and the fracture of human teeth , 2005, Nature materials.

[56]  G. Moonen,et al.  Image analysis of the axonal ingrowth into poly(D,L-lactide) porous scaffolds in relation to the 3-D porous structure. , 2003, Biomaterials.

[57]  C. Ponton,et al.  Vickers indentation fracture toughness test Part 1 Review of literature and formulation of standardised indentation toughness equations , 1989 .

[58]  T. Rouxel,et al.  Fractal in fracture of bulk metallic glass , 2010 .

[59]  R O Ritchie,et al.  Cyclic fatigue-crack propagation, stress-corrosion, and fracture-toughness behavior in pyrolytic carbon-coated graphite for prosthetic heart valve applications. , 1990, Journal of biomedical materials research.

[60]  Qun-fang Lei,et al.  Effects of fractal surface on C6 glioma cell morphogenesis and differentiation in vitro. , 2010, Biomaterials.

[61]  R. Cahn.  Fractal dimension and fracture , 1989, Nature.

[62]  U. Messerschmidt,et al.  Fracture toughness of sintered SiC ceramics: a comparison between different methods , 1992 .

[63]  Viktor Mechtcherine,et al.  Fracture mechanical behavior of concrete and the condition of its fracture surface , 2009 .

[64]  Heinz-Otto Peitgen.  Benoît B. Mandelbrot (1924–2010) , 2010, Science.

[65]  R. Lakes.  Materials with structural hierarchy , 1993, Nature.

[66]  Fractal aspects of ductile and cleavage fracture surfaces , 2010 .

[67]  S. Bhole,et al.  Three-dimensional fractal analysis of fracture surfaces in a titanium alloy for biomedical applications , 2008 .