The role of different properties of activated carbon in CO2 adsorption

[1]  Eva Björkman,et al.  Activated carbons prepared from hydrothermally carbonized waste biomass used as adsorbents for CO2 , 2013 .

[2]  Zhenyu Liu,et al.  Kinetic Behaviors of CaC2 Production from Coke and CaO , 2013 .

[3]  Weize Wu,et al.  Dynamic adsorption of CO2 over activated carbon – Error analysis and effect of N2 , 2013 .

[4]  Gang Yu,et al.  Granular bamboo-derived activated carbon for high CO(2) adsorption: the dominant role of narrow micropores. , 2012, ChemSusChem.

[5]  Zhenyu Liu,et al.  Behaviors of NH4HSO4 in SCR of NO by NH3 over different cokes , 2012 .

[6]  Robin Irons,et al.  Materials challenges for the development of solid sorbents for post-combustion carbon capture , 2012 .

[7]  Yury Gogotsi,et al.  Effect of pore size on carbon dioxide sorption by carbide derived carbon , 2011 .

[8]  R. Ruoff,et al.  Carbon-Based Supercapacitors Produced by Activation of Graphene , 2011, Science.

[9]  Antonio B. Fuertes,et al.  Sustainable porous carbons with a superior performance for CO2 capture , 2011 .

[10]  W. Daud,et al.  Ammonia modification of activated carbon to enhance carbon dioxide adsorption: Effect of pre-oxidation , 2011 .

[11]  Wan Mohd Ashri Wan Daud,et al.  A review on surface modification of activated carbon for carbon dioxide adsorption , 2010 .

[12]  A. Laaksonen,et al.  Sorbents for CO(2) capture from flue gas--aspects from materials and theoretical chemistry. , 2010, Nanoscale.

[13]  J. J. Pis,et al.  On the limits of CO2 capture capacity of carbons , 2010 .

[14]  Christopher W. Jones,et al.  Adsorbent materials for carbon dioxide capture from large anthropogenic point sources. , 2009, ChemSusChem.

[15]  Jianguo Mi,et al.  Improved Direct Correlation Function for Density Functional Theory Analysis of Pore Size Distributions , 2009 .

[16]  S. Su,et al.  CO2 capture capacities of activated carbon fibre-phenolic resin composites , 2009 .

[17]  C. Pevida,et al.  Evaluation of Activated Carbon Adsorbents for CO2 Capture in Gasification , 2009 .

[18]  C. J. Donahue,et al.  Proximate Analysis of Coal , 2009 .

[19]  Youqing Shen,et al.  Flue-Gas Carbon Capture on Carbonaceous Sorbents: Toward a Low-Cost Multifunctional Carbon Filter for "Green" Energy Producers † , 2008 .

[20]  Krista S. Walton,et al.  Applicability of the BET method for determining surface areas of microporous metal-organic frameworks. , 2007, Journal of the American Chemical Society.

[21]  W. Yuan,et al.  Characterization of surface oxygen complexes on carbon nanofibers by TPD, XPS and FT-IR , 2007 .

[22]  C. Lastoskie,et al.  Molecular simulation of carbon dioxide adsorption in chemically and structurally heterogeneous porous carbons , 2006 .

[23]  Despina Vamvuka,et al.  The effect of mineral matter on the physical and chemical activation of low rank coal and biomass materials , 2006 .

[24]  Chong Kul Ryu,et al.  CO2 absorption and regeneration of alkali metal-based solid sorbents , 2006 .

[25]  B. Saha,et al.  Surface modification and characterisation of a coal-based activated carbon , 2005 .

[26]  Kee-Kahb Koo,et al.  CO2 recovery from flue gas by PSA process using activated carbon , 2001 .

[27]  J. Poston,et al.  Adsorption of CO2 on molecular sieves and activated carbon , 2001 .

[28]  A. Neimark,et al.  Unified Approach to Pore Size Characterization of Microporous Carbonaceous Materials from N2, Ar, and CO2 Adsorption Isotherms† , 2000 .

[29]  D. Cazorla-Amorós,et al.  CO2 As an Adsorptive To Characterize Carbon Molecular Sieves and Activated Carbons , 1998 .

[30]  D. Cazorla-Amorós,et al.  Characterization of Activated Carbon Fibers by CO 2 Adsorption , 1996 .

[31]  R. T. Yang,et al.  Comparison of Activated Carbon and Zeolite 13X for CO2 Recovery from Flue-Gas by Pressure Swing Adsorption , 1995 .

[32]  R. C. Bansal,et al.  Studies on ultra-clean carbon surfaces—IV. Decomposition of carbon-oxygen surface complexes , 1970 .

[33]  Mietek Jaroniec,et al.  Importance of small micropores in CO2 capture by phenolic resin-based activated carbon spheres , 2013 .

[34]  Soo-Jin Park,et al.  Determination of the optimal pore size for improved CO2 adsorption in activated carbon fibers. , 2013, Journal of colloid and interface science.

[35]  P. Llewellyn,et al.  Is the bet equation applicable to microporous adsorbents , 2007 .

[36]  M. Thommes,et al.  Comparison of DFT characterization methods based on N2, Ar, CO2, and H2 adsorption applied to carbons with various pore size distributions , 2004 .

[37]  V. Gómez-Serrano,et al.  Formation of oxygen structures by air activation. A study by FT-IR spectroscopy , 1999 .

[38]  I. Jacobs,et al.  Trace element distributions of a granular activated carbon , 1986 .

[39]  E. Barrett,et al.  (CONTRIBUTION FROM THE MULTIPLE FELLOWSHIP OF BAUGH AND SONS COMPANY, MELLOX INSTITUTE) The Determination of Pore Volume and Area Distributions in Porous Substances. I. Computations from Nitrogen Isotherms , 1951 .