Understanding the Fracture Behaviors of Metallic Glasses—An Overview

[1]  R. Ritchie,et al.  On the understanding of the effects of sample size on the variability in fracture toughness of bulk metallic glasses , 2017 .

[2]  S. Poon,et al.  Fatigue behavior of an Fe_48Cr_15Mo_14Er_2C_15B_6 amorphous steel , 2007 .

[3]  J. Schroers,et al.  Bulk Metallic Glass: The Smaller the Better , 2011, Advanced materials.

[4]  Huajian Gao,et al.  Test sample geometry for fracture toughness measurements of bulk metallic glasses , 2018 .

[5]  A. Yavari,et al.  Cobalt-based bulk glassy alloy with ultrahigh strength and soft magnetic properties , 2003, Nature materials.

[6]  G. Taylor,et al.  The penetration of a fluid into a porous medium or Hele-Shaw cell containing a more viscous liquid , 1958, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[7]  J. Lewandowski,et al.  Effects of Changes in Test Temperature and Loading Conditions on Fracture Toughness of a Zr-Based Bulk Metallic Glass , 2008 .

[8]  W. Wang,et al.  Fracture of brittle metallic glasses: brittleness or plasticity. , 2005, Physical review letters.

[9]  N. Chen,et al.  A Ti–Zr–Be–Fe–Cu bulk metallic glass with superior glass-forming ability and high specific strength , 2013 .

[10]  Huajian Gao,et al.  Origin of anomalous inverse notch effect in bulk metallic glasses , 2015 .

[11]  Haifeng Zhang,et al.  TiZr-base Bulk Metallic Glass with over 50 mm in Diameter , 2010 .

[12]  C. Liu,et al.  Test environments and mechanical properties of Zr-base bulk amorphous alloys , 1998 .

[13]  Jian Xu,et al.  Reliability of compressive fracture strength of Mg–Zn–Ca bulk metallic glasses: Flaw sensitivity and Weibull statistics , 2008 .

[14]  K. Yao,et al.  A non-viscous-featured fractograph in metallic glasses , 2016 .

[15]  Hung Chen.  REVIEW ARTICLE: Glassy metals , 1980 .

[16]  R. Ritchie,et al.  Fatigue of a Zr-Ti-Cu-Ni-Be bulk amorphous metal: Stress/life and crack-growth behavior , 1998 .

[17]  K. Yao,et al.  Centimeter-sized Ti-rich bulk metallic glasses with superior specific strength and corrosion resistance , 2019, Journal of Non-Crystalline Solids.

[18]  J. Lewandowski,et al.  Ductile-to-brittle transition in a Ti-based bulk metallic glass , 2009 .

[19]  Robert O Ritchie,et al.  A damage-tolerant glass. , 2011, Nature materials.

[20]  C. R. Brooks,et al.  Fatigue behavior of Zr52.5Al10Ti5Cu17.9Ni14.6 bulk metallic glass , 2002 .

[21]  L. A. Davis.  Fracture of Ni-Fe base metallic glasses , 1975 .

[22]  H. Ding,et al.  A quinary Ti-Zr-Hf-Be-Cu high entropy bulk metallic glass with a critical size of 12 mm , 2015 .

[23]  Jian Xu,et al.  Fatigue endurance limit and crack growth behavior of a high-toughness Zr61Ti2Cu25Al12 bulk metallic glass , 2015 .

[24]  J. F. Löffler,et al.  Stick-slip dynamics and recent insights into shear banding in metallic glasses , 2011 .

[25]  R. Raghavan,et al.  Ductile to brittle transition in the Zr41.2Ti13.75Cu12.5Ni10Be22.5 bulk metallic glass , 2006 .

[26]  J. Lewandowski,et al.  Tough Fe-based bulk metallic glasses , 2008 .

[27]  Weihua Wang,et al.  The fracture of bulk metallic glasses , 2015 .

[28]  J. F. Löffler,et al.  Propagation dynamics of individual shear bands during inhomogeneous flow in a Zr-based bulk metallic glass , 2011 .

[29]  S. Poon,et al.  Fe-based bulk metallic glasses with diameter thickness larger than one centimeter , 2004 .

[30]  Mihai Stoica,et al.  Serrated flow and stick-slip deformation dynamics in the presence of shear-band interactions for a Zr-based metallic glass , 2012 .

[31]  Weihua Wang,et al.  Bulk metallic glasses , 2004 .

[32]  P. Liaw,et al.  Size effects on the fatigue behavior of bulk metallic glasses , 2011 .

[33]  U. Ramamurty,et al.  On the mechanism and the length scales involved in the ductile fracture of a bulk metallic glass , 2013 .

[34]  A. Argon,et al.  The mechanism of fracture in glassy materials capable of some inelastic deformation , 1976 .

[35]  Wei Zhang,et al.  Fatigue properties in high strength bulk metallic glasses , 2012 .

[36]  R. Raghavan,et al.  On factors influencing the ductile-to-brittle transition in a bulk metallic glass , 2009 .

[37]  K. Yao,et al.  Superductile bulk metallic glass , 2006 .

[38]  A. Inoue,et al.  Impact Fracture Energy of Bulk Amorphous Zr55Al10Cu30Ni5 Alloy , 1996 .

[39]  Yat Li,et al.  Embrittlement of a bulk metallic glass due to low-temperature annealing , 2002 .

[40]  U. Ramamurty,et al.  Temperature-dependence of mode I fracture toughness of a bulk metallic glass , 2018 .

[41]  Y. Yokoyama,et al.  A sequential pre-cracking procedure to measure the mode-I fracture toughness of ultra pure bulk metallic glasses , 2017 .

[42]  W. Wang,et al.  Making metallic glasses plastic by control of residual stress , 2006, Nature materials.

[43]  P. Liaw,et al.  Evolution of Mechanical Properties of Cast Zr50Cu40Al10 Glassy Alloys by Structural Relaxation , 2005 .

[44]  C. R. Brooks,et al.  Fatigue behavior and fracture morphology of Zr50Al10Cu40 and Zr50Al10Cu30Ni10 bulk-metallic glasses , 2004 .

[45]  N. Chen,et al.  Quaternary Ti–Zr–Be–Ni bulk metallic glasses with large glass-forming ability , 2015 .

[46]  Jie Zhou,et al.  Structure origin of a transition of classic-to-avalanche nucleation in Zr-Cu-Al bulk metallic glasses , 2018 .

[47]  K. Yao,et al.  Direct experimental evidence of nano-voids formation and coalescence within shear bands , 2014 .

[48]  J. Lewandowski,et al.  Deformation and fracture toughness of a bulk amorphous Zr–Ti–Ni–Cu–Be alloy , 2000 .

[49]  J. Eckert,et al.  Unified tensile fracture criterion. , 2005, Physical review letters.

[50]  Y. Chao,et al.  An Assessment of Mechanical Properties of A508-3 Steel Used in Chinese Nuclear Reactor Pressure Vessels , 2015 .

[51]  W. Johnson,et al.  Fracture toughness and fatigue-crack propagation in a Zr–Ti–Ni–Cu–Be bulk metallic glass , 1997 .

[52]  K. Yao,et al.  The material-dependence of plasticity in metallic glasses: An origin from shear band thermology , 2016 .

[53]  Daniel B. Miracle,et al.  Mechanical and Fatigue Behavior of Ca65Mg15Zn20 Bulk‐Metallic Glass , 2009 .

[54]  C. R. Brooks,et al.  Fatigue behavior of Zr–Ti–Ni–Cu–Be bulk-metallic glasses , 2005 .

[55]  P. Liaw,et al.  The influence of Pd on tension–tension fatigue behavior of Zr-based bulk-metallic glasses , 2010 .

[56]  R. Ritchie,et al.  Mechanisms for fracture and fatigue-crack propagation in a bulk metallic glass , 1999 .

[57]  J. Schroers.  Processing of Bulk Metallic Glass , 2010, Advanced materials.

[58]  A. Inoue,et al.  Rotating-Beam Fatigue Strength of Pd 40 Cu 30 Ni 10 P 20 Bulk Amorphous Alloy , 1999 .

[59]  A. L. Greer,et al.  Bulk Metallic Glasses: At the Cutting Edge of Metals Research , 2007 .

[60]  Zhe-feng Zhang,et al.  Wavy cleavage fracture of bulk metallic glass , 2006 .

[61]  F. Spaepen.  Metallic glasses: Must shear bands be hot? , 2006 .

[62]  Yanfei Gao,et al.  Deformation-induced spatiotemporal fluctuation, evolution and localization of strain fields in a bulk metallic glass , 2015 .

[63]  J. Kruzic,et al.  Effects of free volume changes and residual stresses on the fatigue and fracture behavior of a Zr–Ti–Ni–Cu–Be bulk metallic glass , 2008 .

[64]  T. Masumoto,et al.  Fatigue Fracture of Amorphous Pd-20at.%Si Alloy , 1975 .

[65]  Evan Ma,et al.  Structural processes that initiate shear localization in metallic glass , 2009 .

[66]  C. Schuh,et al.  Atomistic basis for the plastic yield criterion of metallic glass , 2003, Nature materials.

[67]  P. Liaw,et al.  Fatigue and Fracture Behavior of a Ca-Based Bulk-Metallic Glass , 2010 .

[68]  Evan Ma,et al.  Shear bands in metallic glasses , 2013 .

[69]  C. Volkert,et al.  Long range stress fields and cavitation along a shear band in a metallic glass: The local origin of fracture , 2015 .

[70]  K. Yao,et al.  Serration behaviours in metallic glasses with different plasticity , 2016 .

[71]  M. Morrison,et al.  Four-point-bending-fatigue behavior of the Zr-based Vitreloy 105 bulk metallic glass , 2007 .

[72]  Xianghong Xu,et al.  Ductile To Brittle Transition In Dynamic Fracture Of Brittle Bulk Metallic Glass , 2008 .

[73]  M. Demetriou,et al.  On the variability in fracture toughness of ‘ductile’ bulk metallic glasses , 2015 .

[74]  Lin Liu,et al.  Softening and dilatation in a single shear band , 2011 .

[75]  T. Hufnagel,et al.  Mechanical behavior of amorphous alloys , 2007 .

[76]  K. Yao,et al.  Serration Behavior of a Zr-Based Metallic Glass Under Different Constrained Loading Conditions , 2016, Metallurgical and Materials Transactions A.

[77]  Yuh J. Chao,et al.  Charpy impact energy, fracture toughness and ductile–brittle transition temperature of dual-phase 590 Steel , 2007 .

[78]  Jinshan Li,et al.  Effect of strain rate on compressive behavior of Ti-based bulk metallic glass at room temperature , 2009 .

[79]  A. Inoue.  Stabilization of metallic supercooled liquid and bulk amorphous alloys , 2000 .

[80]  G. J. Fan,et al.  Fatigue behaviors of the Cu47.5Zr47.5Al5 bulk-metallic glass (BMG) and Cu47.5Zr38Hf9.5Al5 BMG composite , 2007 .

[81]  W. Wang,et al.  Nanoscale periodic morphologies on the fracture surface of brittle metallic glasses. , 2007, Physical review letters.

[82]  Jörg F. Löffler,et al.  Shear‐Band Dynamics in Metallic Glasses , 2015 .

[83]  C. R. Brooks,et al.  Fatigue behavior of bulk-metallic glasses , 2004 .

[84]  Reinhold H. Dauskardt,et al.  The fatigue endurance limit of a Zr-based bulk metallic glass , 2006 .

[85]  W. Johnson,et al.  Solution to the problem of the poor cyclic fatigue resistance of bulk metallic glasses , 2009, Proceedings of the National Academy of Sciences.

[86]  Huajian Gao,et al.  Processing effects on fracture toughness of metallic glasses , 2017 .

[87]  J. Eckert,et al.  Fracture mechanisms in bulk metallic glassy materials. , 2003, Physical review letters.

[88]  Jian Xu,et al.  Optimization for toughness in metalloid-free Ni-based bulk metallic glasses , 2011 .

[89]  John W. Hutchinson,et al.  Strain localization in amorphous metals , 1982 .

[90]  A. Argon.  Plastic deformation in metallic glasses , 1979 .

[91]  H. Ding,et al.  A senary TiZrHfCuNiBe high entropy bulk metallic glass with large glass-forming ability , 2014 .

[92]  J. Kruzic,et al.  Influence of structural relaxation on the fatigue behavior of a Zr41.25Ti13.75Ni10Cu12.5Be22.5 bulk amorphous alloy , 2005 .

[93]  P. Liaw,et al.  The Duality of Fracture Behavior in a Ca-based Bulk-Metallic Glass , 2011 .

[94]  K. Yao,et al.  The shear band controlled deformation in metallic glass: a perspective from fracture , 2016, Scientific Reports.

[95]  Frans Spaepen,et al.  A microscopic mechanism for steady state inhomogeneous flow in metallic glasses , 1977 .

[96]  A. Rosakis,et al.  Fracture toughness determination for a beryllium-bearing bulk metallic glass , 1997 .

[97]  C. Zhang,et al.  Fe-based bulk metallic glass with high plasticity , 2007 .

[98]  Jian Xu,et al.  Locating bulk metallic glasses with high fracture toughness Chemical effects and composition optimization , 2011 .

[99]  Kap-Ho Lee,et al.  Ductility enhancement of a Ti-based bulk metallic glass through annealing treatment below the glass transition temperature , 2012 .

[100]  W. Johnson,et al.  Mechanical properties of Zr56.2Ti13.8Nb5.0Cu6.9Ni5.6Be12.5 ductile phase reinforced bulk metallic glass composite , 2001 .

[101]  N. Chen,et al.  Pseudo-quinary Ti20Zr20Hf20Be20(Cu20 -xNix) high entropy bulk metallic glasses with large glass forming ability , 2015 .

[102]  U. Ramamurty,et al.  The fracture toughness of bulk metallic glasses , 2010 .

[103]  W. Johnson,et al.  Cryogenic Charpy impact testing of metallic glass matrix composites , 2012 .

[104]  Yong Yang,et al.  Size effect on stability of shear-band propagation in bulk metallic glasses: an overview , 2011, Journal of Materials Science.

[105]  A. Inoue,et al.  Micromechanisms of serrated flow in a Ni50Pd30P20 bulk metallic glass with a large compression plasticity , 2008 .

[106]  S. G. Mayr.  Activation energy of shear transformation zones: a key for understanding rheology of glasses and liquids. , 2006, Physical review letters.

[107]  U. Ramamurty,et al.  Mixed mode (I and II) crack tip fields in bulk metallic glasses , 2009 .

[108]  T. Nieh,et al.  Flow serration and shear-band viscosity during inhomogeneous deformation of a Zr-based bulk metallic glass , 2009 .

[109]  Weihua Wang,et al.  Plasticity of ductile metallic glasses: a self-organized critical state. , 2010, Physical review letters.

[110]  Jian Xu,et al.  Notch toughness of Cu-based bulk metallic glasses , 2009 .