Design-oriented modelling on cooling performance of the earth-air heat exchanger for livestock housing

Abstract Access to inexpensive cooling sources is a precondition for developing cost-effective methods to mitigate heat stress among farm animal under hot climate conditions. The earth-air heat exchanger (EAHE) is a promising energy-effective technique that can be used to reduce the cooling load of a livestock building in hot days. Several studies have been carried out to assess the feasibility of EAHE for tempering air in livestock buildings. However, no mathematical model serving for EAHE design for livestock buildings has been developed, in which the EAHE system is often operated continuously to keep animals comfortable and productive. This work firstly deduced a regression model for predicting the air temperature difference between an EAHE tube inlet and outlet (ΔTi-o) using response surface methodology (RSM) based on the data obtained from validated steady-state numerical simulations. Four key design and operation factors (tube diameter, tube length, air velocity, and the temperature difference between inlet air and the undisturbed soil) were incorporated into the model. Based on the regression model, a mathematical model for predicting the cooling capacity (CC) of an EAHE tube was obtained. Parametric analysis was conducted to reveal the effects of the four factors on both the ΔTi-o and the CC. The models on cooling performance allow the designers to optimize the EAHE configuration for cooling livestock buildings.

[1]  Mark J. Anderson,et al.  RSM Simplified: Optimizing Processes Using Response Surface Methods for Design of Experiments, Second Edition , 2004 .

[2]  J W West,et al.  Effects of heat-stress on production in dairy cattle. , 2003, Journal of dairy science.

[3]  Moncef Krarti,et al.  Analytical model to predict annual soil surface temperature variation , 1995 .

[4]  D. Deglin,et al.  Subsoil Heat Exchangers for the Air Conditioning of Livestock Buildings , 1999 .

[5]  Guoqiang Zhang,et al.  Summary of best guidelines and validation of CFD modeling in livestock buildings to ensure prediction quality , 2016, Comput. Electron. Agric..

[6]  Jyotirmay Mathur,et al.  CFD analysis based parametric study of derating factor for Earth Air Tunnel Heat Exchanger , 2013 .

[7]  R. W. Spengler,et al.  Optimization of Earth-Tube Heat Exchangers for Winter Ventilation of Swine Housing , 1983 .

[8]  Jyotirmay Mathur,et al.  Investigation of soil thermal saturation and recovery under intermittent and continuous operation of EATHE , 2015 .

[9]  D. L. Nofziger,et al.  Incorporating Temperature Effects on Pesticide Degradation into a Management Model , 1999 .

[10]  Sanjeev Jakhar,et al.  Thermal performance investigation of earth air tunnel heat exchanger coupled with a solar air heating duct for northwestern India , 2015 .

[11]  Jyotirmay Mathur,et al.  Transient effect of soil thermal conductivity and duration of operation on performance of Earth Air Tunnel Heat Exchanger , 2013 .

[12]  D. Cox,et al.  An Analysis of Transformations , 1964 .

[13]  Xianting Li,et al.  A fast distributed parameter model of ground heat exchanger based on response factor , 2017 .

[14]  Xiong Shen,et al.  Investigation of response surface methodology for modelling ventilation rate of a naturally ventilated building , 2012 .

[15]  Gary D. Schnitkey,et al.  ECONOMIC LOSSES FROM HEAT STRESS BY US LIVESTOCK INDUSTRIES , 2003 .

[16]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.

[17]  Laura Bellia,et al.  Earth-to-air heat exchangers for Italian climates , 2011 .

[18]  E. Maltz,et al.  Heat stress in lactating dairy cows: a review , 2002 .

[19]  Mylo A. Hellickson,et al.  COMPARISON OF EARTH LOOPS FOR LIVESTOCK HOUSING , 1990 .

[20]  Arnold Janssens,et al.  Thermo-hydraulic design of earth-air heat exchangers , 2003 .

[21]  K. J. Kristensen.  Temperature and Heat Balance of Soil , 1959 .

[22]  Jan Radoń,et al.  Experimental measurements and CFD simulation of a ground source heat exchanger operating at a cold climate for a passive house ventilation system , 2014 .

[23]  M. Bezerra,et al.  Response surface methodology (RSM) as a tool for optimization in analytical chemistry. , 2008, Talanta.

[24]  D. O. Baxter.  Energy Exchanges And Related Temperatures Of An Earth-Tube Heat Exchanger In The Heating Mode , 1992 .

[25]  Wolfgang Büscher,et al.  Investigation of heating and cooling potential of a modular housing system for fattening pigs with integrated geothermal heat exchanger , 2014 .

[26]  Douglas C. Montgomery,et al.  Response Surface Methodology: Process and Product Optimization Using Designed Experiments , 1995 .

[27]  Viorel Badescu,et al.  Simple and accurate model for the ground heat exchanger of a passive house , 2007 .

[28]  Fuxin Niu,et al.  Heat and mass transfer performance analysis and cooling capacity prediction of earth to air heat exchanger , 2015 .

[29]  S. Ferreira,et al.  Box-Behnken design: an alternative for the optimization of analytical methods. , 2007, Analytica chimica acta.

[30]  G. Mihalakakou,et al.  The influence of different ground covers on the heating potential of earth-to-air heat exchangers , 1996 .

[31]  Jinfeng Mao,et al.  Heat transfer analysis of a vertical ground heat exchanger using numerical simulation and multiple regression model , 2016 .

[32]  G. Tiwari,et al.  Thermal modeling of a greenhouse with an integrated earth to air heat exchanger: an experimental validation , 2004 .

[33]  R. L. Sawhney,et al.  Recent advancements in earth air tunnel heat exchanger (EATHE) system for indoor thermal comfort application: A review , 2018 .