Additive manufacturing for prostheses development: state of the art
暂无分享,去创建一个
[1] J. Green. Medical Device Regulations for custom-made devices: answers to ten important questions , 2022 .
[2] F. Kuester,et al. Towards 3D printing of a monocoque transtibial prosthesis using a bio-inspired design workflow , 2021, Rapid Prototyping Journal.
[3] Courtney Mortier,et al. Case Study the Benefits of Integrating 3D Printing into Prosthetics by Comparing a Traditional Manufactured Prosthesis to a 3D Manufactured Transradial Prosthesis , 2021, Journal of Student Research.
[4] Mohammed S. Alqahtani,et al. Optimization of a Patient-Specific External Fixation Device for Lower Limb Injuries , 2021, Polymers.
[5] C. Slump,et al. Pioneering low-cost 3D-printed transtibial prosthetics to serve a rural population in Sierra Leone – an observational cohort study , 2021, EClinicalMedicine.
[6] C. Tu,et al. Three‐dimensional‐printed customized prosthesis for pubic defect: clinical outcomes in 5 cases at a mean follow‐up of 24 months , 2021, BMC Musculoskeletal Disorders.
[7] Sławomir Miechowicz,et al. Method of designing and manufacturing craniofacial soft tissue prostheses using Additive Manufacturing: A case study , 2021 .
[8] D. Wismeijer,et al. A Randomized Clinical Trial comparing the clinical fit of CAD/CAM monolithic zirconia Fixed Dental Prostheses (FDP) on ti-base abutments based on digital or conventional impression techniques. One year follow-up. , 2021, The International journal of prosthodontics.
[9] Víctor Asanza,et al. A 3D-Printed EEG based Prosthetic Arm , 2021, 2020 IEEE International Conference on E-health Networking, Application & Services (HEALTHCOM).
[10] W. Peng,et al. Reconstruction of Bony Defects after Tumor Resection with 3D-Printed Anatomically Conforming Pelvic Prostheses through a Novel Treatment Strategy , 2020, BioMed research international.
[11] Shanyong Zhang,et al. Clinical and radiological outcomes of Chinese customized three-dimensionally printed total temporomandibular joint prostheses: A prospective case series study. , 2020, Journal of plastic, reconstructive & aesthetic surgery : JPRAS.
[12] H. Pettersson,et al. Additive Manufacturing of Prostheses Using Forest-Based Composites , 2020, Bioengineering.
[13] Karupppasamy Subburaj,et al. Design and development of a novel 3D-printed non-metallic self-locking prosthetic arm for a forequarter amputation. , 2020, Prosthetics and orthotics international.
[14] Mehak Sharma,et al. Direct metal laser sintering of TI6Al4V alloy for patient-specific temporo mandibular joint prosthesis and implant , 2020 .
[15] Yufeng Zheng,et al. An innovative strategy to treat large metaphyseal segmental femoral bone defect using customized design and 3D printed micro-porous prosthesis: a prospective clinical study , 2020, Journal of Materials Science: Materials in Medicine.
[16] C. Keutel,et al. Multimaterial 3D printing of a definitive silicone auricular prosthesis: An improved technique. , 2020, The Journal of prosthetic dentistry.
[17] Marta Revilla-León,et al. Workflow of a fiber-reinforced composite fixed dental prosthesis by using a 4-piece additive manufactured silicone index: A dental technique. , 2020, The Journal of prosthetic dentistry.
[18] C. Tu,et al. Intercalary Reconstruction of the “Ultra-Critical Sized Bone Defect” by 3D-Printed Porous Prosthesis After Resection of Tibial Malignant Tumor , 2020, Cancer management and research.
[19] Shervanthi Homer-Vanniasinkam,et al. Affordable passive 3D-printed prosthesis for persons with partial hand amputation , 2020, Prosthetics and orthotics international.
[20] Martin K. Burns,et al. Introductory Chapter: Past, Present, and Future of Prostheses and Rehabilitation , 2020, Prosthesis.
[21] F. Mangano,et al. Custom-made 3D printed subperiosteal titanium implants for the prosthetic restoration of the atrophic posterior mandible of elderly patients: a case series , 2020, 3D Printing in Medicine.
[22] Z. Shao,et al. Three‐dimensional‐printed intercalary prosthesis for the reconstruction of large bone defect after joint‐preserving tumor resection , 2020, Journal of surgical oncology.
[23] David Rodríguez Salgado,et al. Advances in Orthotic and Prosthetic Manufacturing: A Technology Review , 2020, Materials.
[24] Guofeng Wu,et al. A speech bulb prosthesis for a soft palate defect with a polyetherketoneketone (PEKK) framework fabricated by multiple digital techniques: A clinical report. , 2019, The Journal of prosthetic dentistry.
[25] Shahir Mohd Yusuf,et al. Review: The Impact of Metal Additive Manufacturing on the Aerospace Industry , 2019 .
[26] Todd A. Goldstein,et al. A Pilot Study Testing a Novel 3D Printed Amphibious Lower Limb Prosthesis in a Recreational Pool Setting , 2019, PM & R : the journal of injury, function, and rehabilitation.
[27] S. J. Khan,et al. Impact of Medical Advancement: Prostheses , 2019, Computer Architecture in Industrial, Biomechanical and Biomedical Engineering.
[28] A. Abdelrehem,et al. Customized skull base-temporomandibular joint combined prosthesis with 3D-printing fabrication for craniomaxillofacial reconstruction: a preliminary study. , 2019, International journal of oral and maxillofacial surgery.
[29] Soikat Ghosh Moulic,et al. Digital transformation and 3D printing of transtibial load-bearing prosthesis in India: recent advances, challenges and future perspectives , 2019, Journal of 3D Printing in Medicine.
[30] Gerwin Smit,et al. Functional evaluation of a non-assembly 3D-printed hand prosthesis , 2019, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[31] Chenyu Wang,et al. Individual resection and reconstruction of pelvic tumor with three-dimensional printed customized hemi-pelvic prosthesis , 2019, Medicine.
[32] Fausto Orsi Medola,et al. Avoiding Product Abandonment Through User Centered Design: A Case Study Involving the Development of a 3D Printed Customized Upper Limb Prosthesis , 2019, AHFE.
[33] M. Goiato,et al. Classification, History, and Future Prospects of Maxillofacial Prosthesis , 2019, International journal of dentistry.
[34] Kenji Suzuki,et al. Design of a myoelectric 3D-printed prosthesis for a child with upper limb congenital amputation , 2019, 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).
[35] Jorge M Zuniga,et al. Assessment of body-powered 3D printed partial finger prostheses: a case study , 2019, 3D Printing in Medicine.
[36] Lindsay McHutchion,et al. Integration of digital technology in the workflow for an osseointegrated implant-retained nasal prosthesis: A clinical report. , 2019, The Journal of prosthetic dentistry.
[37] Akshay Sharma,et al. Low-cost sensor-integrated 3D-printed personalized prosthetic hands for children with amniotic band syndrome: A case study in sensing pressure distribution on an anatomical human-machine interface (AHMI) using 3D-printed conformal electrode arrays , 2019, PloS one.
[38] Mariano Jiménez,et al. Additive Manufacturing Technologies: An Overview about 3D Printing Methods and Future Prospects , 2019, Complex..
[39] Heiner Weber,et al. Additive Manufacturing: A Comparative Analysis of Dimensional Accuracy and Skin Texture Reproduction of Auricular Prostheses Replicas , 2019, Journal of prosthodontics : official journal of the American College of Prosthodontists.
[40] Rakesh K. Jain,et al. On the adoption of additive manufacturing in healthcare: a literature review , 2019, Journal of Manufacturing Technology Management.
[41] J. D. da Silva,et al. Functional and aesthetic evaluation after cranial reconstruction with polymethyl methacrylate prostheses using low-cost 3D printing templates in patients with cranial defects secondary to decompressive craniectomies: A prospective study , 2019, Surgical neurology international.
[42] Wenbo Jiang,et al. An innovative total temporomandibular joint prosthesis with customized design and 3D printing additive fabrication: a prospective clinical study , 2019, Journal of Translational Medicine.
[43] James E. Pierce,et al. Functional changes through the usage of 3D-printed transitional prostheses in children , 2019, Disability and rehabilitation. Assistive technology.
[44] A. Tricco,et al. Assessment of Long-term Follow-up of Randomized Trial Participants by Linkage to Routinely Collected Data , 2018, JAMA network open.
[45] S. Farr,et al. Peromelia – congenital transverse deficiency of the upper limb: a literature review and current prosthetic treatment , 2018, Journal of children's orthopaedics.
[46] Sydney Y. Schaefer,et al. Within-Session Practice Effects in the Jebsen Hand Function Test (JHFT) , 2018, The American journal of occupational therapy : official publication of the American Occupational Therapy Association.
[47] Chenyu Wang,et al. Individualized reconstruction for severe periprosthetic fractures around the tumor prosthesis of knee under assistance of 3D printing technology , 2018, Medicine.
[48] Jorge M Zuniga,et al. 3D Printed Antibacterial Prostheses , 2018, Applied Sciences.
[49] D. Ackland,et al. A new three-dimensional, print-on-demand temporomandibular prosthetic total joint replacement system: Preliminary outcomes. , 2018, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.
[50] Constanze Keutel,et al. Direct 3D printing of silicone facial prostheses: A preliminary experience in digital workflow. , 2018, The Journal of prosthetic dentistry.
[51] S. Boriani,et al. Biomimetic 3D-printed custom-made prosthesis for anterior column reconstruction in the thoracolumbar spine: a tailored option following en bloc resection for spinal tumors , 2018, European Spine Journal.
[52] Frode Eika Sandnes,et al. Interdisciplinary-Based Development of User-Friendly Customized 3D Printed Upper Limb Prosthesis , 2018, Advances in Usability, User Experience and Assistive Technology.
[53] J. Locascio,et al. Randomised controlled trials – the gold standard for effectiveness research , 2018, BJOG : an international journal of obstetrics and gynaecology.
[54] James E. Pierce,et al. Coactivation index of children with congenital upper limb reduction deficiencies before and after using a wrist-driven 3D printed partial hand prosthesis , 2018, Journal of NeuroEngineering and Rehabilitation.
[55] A. Kashani,et al. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges , 2018, Composites Part B: Engineering.
[56] Maria Elizete Kunkel,et al. Feasibility Study of a Methodology Using Additive Manufacture to Produce Silicone Ear Prostheses , 2018, IFMBE Proceedings.
[57] T. Kuiken,et al. Custom, rapid prototype thumb prosthesis for partial-hand amputation: A case report , 2018, Prosthetics and orthotics international.
[58] Robert S. Armiger,et al. Initial Clinical Evaluation of the Modular Prosthetic Limb , 2018, Front. Neurol..
[59] C. Tu,et al. Uncemented three-dimensional-printed prosthetic reconstruction for massive bone defects of the proximal tibia , 2018, World Journal of Surgical Oncology.
[60] Samer Alfayad,et al. Systematic Review of Prosthetic Socket Fabrication using 3D printing , 2018, ICMRE.
[61] Yong Ho Cha,et al. Three-dimensional printed prosthesis demonstrates functional improvement in a patient with an amputated thumb: A technical note , 2018, Prosthetics and orthotics international.
[62] X. Weng,et al. The precision and reliability evaluation of 3-dimensional printed damaged bone and prosthesis models by stereo lithography appearance , 2018, Medicine.
[63] Rui Gao,et al. Chest-wall reconstruction with a customized titanium-alloy prosthesis fabricated by 3D printing and rapid prototyping , 2018, Journal of Cardiothoracic Surgery.
[64] N. Ariani,et al. The Use of CAD/CAM Trial Pattern for Facial Prosthesis Fabrication of a Maxillofacial Patient with Large Defect , 2017 .
[65] Juan Cristóbal Zagal,et al. Quantitative functional evaluation of a 3D–printed silicone‐embedded prosthesis for partial hand amputation: A case report , 2017, Journal of hand therapy : official journal of the American Society of Hand Therapists.
[66] Liang Gao,et al. Three-dimensional-printed upper limb prosthesis for a child with traumatic amputation of right wrist , 2017, Medicine.
[67] Immaculada Llop-Harillo,et al. System for the experimental evaluation of anthropomorphic hands. Application to a new 3D-printed prosthetic hand prototype , 2017, International Biomechanics.
[68] Rubén Agustín-Panadero,et al. A combined digital and stereophotogrammetric technique for rehabilitation with immediate loading of complete‐arch, implant‐supported prostheses: A randomized controlled pilot clinical trial , 2017, The Journal of prosthetic dentistry.
[69] Mohsen Attaran,et al. The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing , 2017 .
[70] Faleh Tamimi,et al. Patient satisfaction with laser‐sintered removable partial dentures: A crossover pilot clinical trial , 2017, The Journal of prosthetic dentistry.
[71] D. Ackland,et al. A personalized 3D-printed prosthetic joint replacement for the human temporomandibular joint: From implant design to implantation. , 2017, Journal of the mechanical behavior of biomedical materials.
[72] N. Daher,et al. Comparative Study of Functional Grasp and Efficiency Between a 3D-Printed and Commercial Myoelectric Transradial Prosthesis Using Able-Bodied Subjects: A Pilot Study , 2017 .
[73] Wenbin Luo,et al. Customized Knee Prosthesis in Treatment of Giant Cell Tumors of the Proximal Tibia: Application of 3-Dimensional Printing Technology in Surgical Design , 2017, Medical science monitor : international medical journal of experimental and clinical research.
[74] Jean M Peck,et al. The development of a low-cost three-dimensional printed shoulder, arm, and hand prostheses for children , 2017, Prosthetics and orthotics international.
[75] F. Piller,et al. Predicting the future of additive manufacturing: A Delphi study on economic and societal implications of 3D printing for 2030 , 2017 .
[76] Gerwin Smit,et al. Passive prosthetic hands and tools: A literature review , 2017, Prosthetics and orthotics international.
[77] M. Grimmer,et al. Active lower limb prosthetics: a systematic review of design issues and solutions , 2016, Biomedical engineering online.
[78] J. Rees,et al. Retrospective Study of the Survival and Patient Satisfaction with Composite Dahl Restorations in the Management of Localised Anterior Tooth Wear. , 2016, European Journal of Prosthodontics and Restorative Dentistry.
[79] Albert J. Shih,et al. Additive manufacturing of custom orthoses and prostheses-A review , 2016 .
[80] C. Mangano,et al. From Guided Surgery to Final Prosthesis with a Fully Digital Procedure: A Prospective Clinical Study on 15 Partially Edentulous Patients , 2016, International journal of dentistry.
[81] Kendall F Gretsch,et al. Development of novel 3D-printed robotic prosthetic for transradial amputees , 2016, Prosthetics and orthotics international.
[82] Rakesh Srivastava,et al. An Open Source 3D-Printed Transitional Hand Prosthesis for Children , 2016 .
[83] R. Prabhu,et al. Clinical acceptability of metal-ceramic fixed partial dental prosthesis fabricated with direct metal laser sintering technique-5 year follow-up , 2016, Journal of Indian Prosthodontic Society.
[84] Vimal Dhokia,et al. Hybrid additive and subtractive machine tools – Research and industrial developments , 2016 .
[85] Charlie C. L. Wang,et al. The status, challenges, and future of additive manufacturing in engineering , 2015, Comput. Aided Des..
[86] Tsukasa Ogasawara,et al. Rehand: Realistic electric prosthetic hand created with a 3D printer , 2015, 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).
[87] Zheng Guo,et al. Implantation of customized 3-D printed titanium prosthesis in limb salvage surgery: a case series and review of the literature , 2015, World Journal of Surgical Oncology.
[88] Zainul Ahmad Rajion,et al. PROSTHETIC EAR RECONSTRUCTION APPLYING COMPUTER TOMOGRAPHIC (CT) DATA AND ADDITIVE MANUFACTURING TECHNOLOGIES , 2015 .
[89] Woong-Chul Kim,et al. Comparison of prosthetic models produced by traditional and additive manufacturing methods , 2015, The journal of advanced prosthodontics.
[90] Marcelo H. Ang,et al. Customizable soft pneumatic finger actuators for hand orthotic and prosthetic applications , 2015, 2015 IEEE International Conference on Rehabilitation Robotics (ICORR).
[91] P. Choong,et al. Three-dimensional printed calcaneal prosthesis following total calcanectomy☆ , 2015, International journal of surgery case reports.
[92] Yong Huang,et al. Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations , 2015 .
[93] Cristina Fernandez,et al. Cyborg beast: a low-cost 3d-printed prosthetic hand for children with upper-limb differences , 2015, BMC Research Notes.
[94] J. Demol,et al. One-step reconstruction with a 3D-printed, biomechanically evaluated custom implant after complex pelvic tumor resection , 2015, Computer aided surgery : official journal of the International Society for Computer Aided Surgery.
[95] Anton J.M. Schoot Uiterkamp,et al. A global sustainability perspective on 3D printing technologies , 2014 .
[96] Francis H. Froes,et al. The Additive Manufacturing (AM) of Titanium Alloys , 2014 .
[97] Pieter U Dijkstra,et al. Preliminary study of the Southampton Hand Assessment Procedure for Children and its reliability , 2014, BMC Musculoskeletal Disorders.
[98] F. Abu-Zidan,et al. Clinical "case series": a concept analysis. , 2013, African health sciences.
[99] Mohan V. Jacob,et al. Implantable devices: issues and challenges , 2012 .
[100] A. Heinemann,et al. Validity evidence for a modified version of the Orthotics and Prosthetics Users’ Survey , 2012, Disability and rehabilitation. Assistive technology.
[101] Aziz Sheikh,et al. The case study approach , 2011, BMC medical research methodology.
[102] Jan H B Geertzen,et al. University of Groningen Skin Problems of the Stump in Lower Limb Amputees Meulenbelt, , 2011 .
[103] Jacqueline Finch. The ancient origins of prosthetic medicine , 2011, The Lancet.
[104] Peter Liacouras,et al. Designing and manufacturing an auricular prosthesis using computed tomography, 3-dimensional photographic imaging, and additive manufacturing: a clinical report. , 2011, The Journal of prosthetic dentistry.
[105] L. H. Hsu,et al. The Development of a Rapid Prototyping Prosthetic Socket Coated with a Resin Layer for Transtibial Amputees , 2010, Prosthetics and orthotics international.
[106] Richard H. Crawford,et al. Case Report: Variably Compliant Transtibial Prosthetic Socket Fabricated Using Solid Freeform Fabrication , 2008 .
[107] Nicholas Herbert,et al. A preliminary investigation into the development of 3-D printing of prosthetic sockets. , 2005, Journal of rehabilitation research and development.
[108] Peter K. L. Ng,et al. Prosthetic sockets fabrication using rapid prototyping technology , 2002 .
[109] H K Banga,et al. Utilization of Additive Manufacturing in Orthotics and Prosthetic Devices Development , 2021 .
[110] Ognen Tuteski,et al. THE APPLICATION OF ADDITIVE MANUFACTURING IN DEVELOPING 3D PRINTED PROSTETHICS AND ORTHOTIC DEVICES , 2020 .
[111] C. Keutel,et al. Auricular Prostheses Produced by Means of Conventional and Digital Workflows: A Clinical Report on Esthetic Outcomes. , 2018, The International journal of prosthodontics.
[112] Abdul W. Basit,et al. 3D Printing Technologies, Implementation and Regulation: An Overview , 2018 .
[113] M. Setia. Methodology Series Module 1: Cohort Studies , 2016, Indian journal of dermatology.
[114] Hans-Dietrich Haasis,et al. A Study on the Effects of Additive Manufacturing on the Structure of Supply Networks , 2016 .
[115] Ian Gibson,et al. Applications of 3D topography scanning and multi-material additive manufacturing for facial prosthesis , 2016 .
[116] Ian Gibson,et al. Simplifying Medical Additive Manufacturing: Making the Surgeon the Designer , 2015 .
[117] G. Huang,et al. The Development and Strength Reinforcement of Rapid Prototyping Prosthetic Socket Coated with a Resin Layer for Transtibial Amputee , 2009 .
[118] Richard H. Crawford,et al. Double-wall, Transtibial Prosthetic Socket Fabricated Using Selective Laser Sintering: A Case Study , 2000 .
[119] P S Walker,et al. Aseptic loosening in cemented custom-made prosthetic replacements for bone tumours of the lower limb. , 1996, The Journal of bone and joint surgery. British volume.