论文信息 - Fermilab silicon strip readout chip for BTeV

Fermilab silicon strip readout chip for BTeV

A chip has been developed for reading out the silicon strip detectors in the new BTeV colliding beam experiment at Fermilab. The chip has been designed in a 0.25 /spl mu/m complementary metal-oxide-semiconductor (CMOS) technology for high radiation tolerance. Numerous programmable features have been added to the chip, such as setup for operation at different beam crossing intervals. A full size chip has been fabricated and successfully tested. The design philosophy, circuit features, and test results are presented in this paper.

[1] L. Ratti,et al. Survey of noise performances and scaling effects in deep submicron CMOS devices from different foundries , 2004, IEEE Symposium Conference Record Nuclear Science 2004..

[2] G. Chiodini. Radiation Tolerance Studies of BTeV Pixel Readout Chip Prototypes , 2001 .

[3] R. Yarema,et al. PreFPIX2: core architecture and results , 2000, 2000 IEEE Nuclear Science Symposium. Conference Record (Cat. No.00CH37149).

[4] Federico Faccio,et al. Radiation tolerant VLSI circuits in standard deep submicron CMOS technologies for the LHC experiments: practical design aspects , 1999 .

[5] I. Kipnis,et al. The analog front-end section of the BaBar silicon vertex tracker readout IC , 1998 .

[6] I. Kipnis,et al. A time-over-threshold machine: the readout integrated circuit for the BABAR Silicon Vertex Tracker , 1997 .

[7] Veljko Radeka,et al. EFFECT OF BASELINE RESTORATION ON SIGNAL-TO-NOISE RATIO IN PULSE AMPLITUDE MEASUREMENTS. , 1967 .

[8] P. F. Manfredi,et al. Processing the signals from solid-state detectors in elementary-particle physics , 1986 .

[9] L. Poulo,et al. A High Precision DC Restorer , 1967 .