Binder-free carbon black/stainless steel mesh composite electrode for high-performance anode in microbial fuel cells

Abstract Carbon black/stainless steel mesh (CB/SSM) composite electrodes were developed as high-performance anodes of microbial fuel cell (MFC) by using a binder-free dipping/drying method. The acid-treatment and thin layer of CB coating greatly improved the microbial adhesion of the electrode surface and facilitated the electron transfer between the bacteria and the electrode surface. As a result, a single-layer CB/SSM anode with thickness of 0.3 mm could generate a projected current density of about 1.53 ± 0.15 mA cm−2 and volumetic current density of 51.0 ± 5.0 mA cm−3, which was much higher than that of the bare SSM anode and conventional carbon felt anode with thickness of 2 mm. Moreover, three-dimensional (3D) CB/SSM electrode could be prepared by simple folding the singe-layer SSM, and produced a projected current density to 10.07 ± 0.88 mA cm−2 and a volumetric current density of 18.66 ± 1.63 mA cm−3. The MFC equipped with the 3D-CB/SSM anode produced a high maximum power density of 3215 ± 80 mW m−2. The CB/SSM electrodes showed good mechanical and electrical properties, excellent microbial adhesion; it represented a high-performance, low-cost electrode material that is easy to fabricate and scale-up.

[1]  Korneel Rabaey,et al.  Conversion of Wastes into Bioelectricity and Chemicals by Using Microbial Electrochemical Technologies , 2012, Science.

[2]  Hongbing Yu,et al.  Lack of anodic capacitance causes power overshoot in microbial fuel cells. , 2013, Bioresource technology.

[3]  B. Erable,et al.  Stainless steel is a promising electrode material for anodes of microbial fuel cells , 2012 .

[4]  Huajian Gao,et al.  Mechanics of hierarchical adhesion structures of geckos , 2005 .

[5]  N. Ren,et al.  Fabrication of stainless steel mesh gas diffusion electrode for power generation in microbial fuel cell. , 2011, Biosensors & bioelectronics.

[6]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[7]  Jian Sun,et al.  Carbon nanotube-coated stainless steel mesh for enhanced oxygen reduction in biocathode microbial fuel cells , 2013 .

[8]  A. Carmona-Martínez,et al.  Electrospun and solution blown three-dimensional carbon fiber nonwovens for application as electrodes in microbial fuel cells , 2011 .

[9]  P. Liang,et al.  Recent progress in electrodes for microbial fuel cells. , 2011, Bioresource technology.

[10]  Bruce E Logan,et al.  Microbial fuel cells--challenges and applications. , 2006, Environmental science & technology.

[11]  Jurg Keller,et al.  Bioelectrochemical Systems: From Extracellular Electron Transfer to Biotechnological Application , 2009 .

[12]  Claire Dumas,et al.  Marine microbial fuel cell: Use of stainless steel electrodes as anode and cathode materials , 2007 .

[13]  U. Schröder,et al.  Stainless steel mesh supported nitrogen-doped carbon nanofibers for binder-free cathode in microbial fuel cells. , 2012, Biosensors & bioelectronics.

[14]  Stefano Freguia,et al.  Microbial fuel cells: methodology and technology. , 2006, Environmental science & technology.

[15]  Bruce E Logan,et al.  High surface area stainless steel brushes as cathodes in microbial electrolysis cells. , 2009, Environmental science & technology.

[16]  U. Schröder,et al.  Effect of fiber diameter on the behavior of biofilm and anodic performance of fiber electrodes in microbial fuel cells. , 2011, Bioresource technology.

[17]  Kun Guo,et al.  Flame oxidation of stainless steel felt enhances anodic biofilm formation and current output in bioelectrochemical systems. , 2014, Environmental science & technology.

[18]  B. Erable,et al.  Stainless steel foam increases the current produced by microbial bioanodes in bioelectrochemical systems , 2014 .

[19]  Uwe Schröder,et al.  Revealing the electrochemically driven selection in natural community derived microbial biofilms using flow-cytometry , 2011 .

[20]  Ming-hua Zhou,et al.  An overview of electrode materials in microbial fuel cells , 2011 .

[21]  Zhiyong Ren,et al.  Concurrent desalination and hydrogen generation using microbial electrolysis and desalination cells. , 2011, Environmental science & technology.

[22]  M. Elimelech,et al.  Membrane-based processes for sustainable power generation using water , 2012, Nature.

[23]  Jeremy S. Guest,et al.  Flame synthesis of carbon nanostructures on stainless steel anodes for use in microbial fuel cells , 2011 .

[24]  Derek R. Lovley,et al.  Cyclic voltammetry of biofilms of wild type and mutant Geobacter sulfurreducens on fuel cell anodes indicates possible roles of OmcB, OmcZ, type IV pili, and protons in extracellular electron transfer , 2009 .

[25]  Claire Dumas,et al.  Microbial electrocatalysis with Geobacter sulfurreducensbiofilm on stainless steel cathodes , 2008 .

[26]  Uwe Schröder,et al.  On the use of cyclic voltammetry for the study of anodic electron transfer in microbial fuel cells , 2008 .

[27]  F. Harnisch,et al.  Improvement of the anodic bioelectrocatalytic activity of mixed culture biofilms by a simple consecutive electrochemical selection procedure. , 2008, Biosensors & bioelectronics.

[28]  K. Xiao,et al.  A new method for water desalination using microbial desalination cells. , 2009, Environmental science & technology.