Time-delay pre-filter design for vibration free tracking of periodic reference signals

The aim of this work is the development of time-delay filters that enable tracking of periodic signals with zero phase error. Time-Delay control or input-shaping is a proven technique to reduce motion induced vibrations for systems with lightly damped modes subject to point-to-point movements. An extension is proposed for systems subject to periodic reference signals, for which a closed-form solution is provided for second-order systems, followed by a generalization for higher order systems and multi-harmonic reference signals. It is shown that the theory enables a significant reduction of tracking errors for non-differentiable reference signals. The paper concludes with the presentation of an approach to desensitize the pre-filter to uncertainties in the forcing frequencies.

[1]  D. De Roover,et al.  Point-to-point control of a high accuracy positioning mechanism , 1997, Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).

[2]  Warren P. Seering,et al.  INPUT SHAPING FOR VIBRATION REDUCTION WITH SPECIFIED INSENSITIVITY TO MODELING ERRORS , 1996 .

[3]  Siep Weiland,et al.  Design of noise and period-time robust high-order repetitive control, with application to optical storage , 2007, Autom..

[4]  Keum-Shik Hong,et al.  Robust time-delay control of a reclaimer , 1999 .

[5]  John Lygeros,et al.  Nanopositioning With Impulsive State Multiplication: A Hybrid Control Approach , 2013, IEEE Transactions on Control Systems Technology.

[6]  Peter H. N. de With,et al.  Image quality analysis of vibration effects in C-arm flat panel X-ray imaging , 2011, 2011 4th International Congress on Image and Signal Processing.

[7]  T. Singh.  Optimal Reference Shaping for Dynamical Systems: Theory and Applications , 2009 .

[8]  M Maarten Steinbuch,et al.  Input design for optimal discrete time point-to-point motion of an industrial XY-positioning table , 2000, Proceedings of the 39th IEEE Conference on Decision and Control (Cat. No.00CH37187).

[9]  Tarunraj Singh.  Pole-Zero, Zero-Pole Canceling Input Shapers , 2012 .

[10]  Sean B Andersson,et al.  Local raster scanning for high-speed imaging of biopolymers in atomic force microscopy. , 2011, The Review of scientific instruments.

[11]  Mohd Razali,et al.  Hybrid Learning Control Schemes With Input Shaping Of A Flexible Manipulator System , 2012 .

[12]  Tarunraj Singh,et al.  Time-Optimal Output Transition for Minimum-Phase Systems , 2013 .

[13]  Warren P. Seering,et al.  Preshaping Command Inputs to Reduce System Vibration , 1990 .

[14]  O.H. Bosgra,et al.  Point-to-point control of a MIMO servomechanism , 1998, Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207).

[15]  Masayoshi Tomizuka,et al.  Zero Phase Error Tracking Algorithm for Digital Control , 1987 .

[16]  J. Wong,et al.  Flat-panel cone-beam computed tomography for image-guided radiation therapy. , 2002, International journal of radiation oncology, biology, physics.

[17]  Maarten Steinbuch,et al.  Repetitive control for systems with uncertain period-time , 2002, Autom..

[18]  Maarten Steinbuch,et al.  Model-based approach to minimize system calibrations for 3D reconstruction quality of a cone-beam CT system , 2013, 2013 IEEE International Conference on Control Applications (CCA).

[19]  Tarunraj Singh,et al.  Input-shaped control of three-dimensional maneuvers of flexible spacecraft , 1993 .

[20]  Maarten Steinbuch,et al.  On inferential Iterative Learning Control: With example to a printing system , 2014, 2014 American Control Conference.