Optimization of wire electrical discharge machining process parameters for cutting tungsten

This study analyzes variations in metal removal rate (MRR) and quality performance of roughness average (Ra) and corner deviation (CD) depending on parameters of wire electrical discharge machining (WEDM) process in relation to the cutting of pure tungsten profiles. A hybrid method including response surface methodology (RSM) and back-propagation neural network (BPNN) integrated simulated annealing algorithm (SAA) were proposed to determine an optimal parameter setting. The results of 18 experimental runs via a Taguchi orthogonal table were utilized to train the BPNN to predict the MRR, Ra, and CD properties. Simultaneously, RSM and SAA approaches were individually applied to search for an optimal setting. In addition, analysis of variance was implemented to identify significant factors for the processing parameters. Furthermore, the field-emission scanning electron microscope images show that a lot of built-edge layers were presented on the finishing surface after the WEDM process. Finally, the optimized result of BPNN with integrated SAA was compared with that obtained by an RSM approach. Comparisons of the results of the algorithms and confirmation experiments show that both RSM and BPNN/SAA methods are effective tools for the optimization of parameters in WEDM process.

[1]  Shankar Chakraborty,et al.  A study on the performance of some multi-response optimisation methods for WEDM processes , 2010 .

[2]  Yung-Kuang Yang,et al.  Experimental analysis and optimization of a photo resist coating process for photolithography in wafer fabrication , 2006, Microelectron. J..

[3]  Sushil Kumar,et al.  Optimization of green sand casting process parameters of a foundry by using Taguchi’s method , 2011 .

[4]  V. N. Gaitonde,et al.  Some Studies in Metal Matrix Composites Machining using Response Surface Methodology , 2009 .

[5]  D. V. S. S. S. V. Prasad,et al.  Empirical modeling and optimization of wire electrical discharge machining , 2009 .

[6]  Chih-Hung Tsai,et al.  Optimization of wire electrical discharge machining for pure tungsten using a neural network integrated simulated annealing approach , 2010, Expert Syst. Appl..

[7]  Amar Patnaik,et al.  Optimization of wire electrical discharge machining (WEDM) process parameters using Taguchi method , 2007 .

[8]  Abbas Vafaeesefat,et al.  Optimum creep feed grinding process conditions for Rene 80 supper alloy using neural network , 2009 .

[9]  Bijoy Bhattacharyya,et al.  Modeling and optimization of wire electrical discharge machining of γ-TiAl in trim cutting operation , 2008 .

[10]  Hsin-Te Liao,et al.  A Study of Taguchi and Design of Experiments Method in Injection Molding Process for Polypropylene Components , 2008 .

[11]  S. K. Malhotra,et al.  Modeling and Optimization of Process Parameters for Defect Toleranced Drilling of GFRP Composites , 2006 .

[12]  L. Slătineanu,et al.  Using wire electrical discharge machining for improved corner cutting accuracy of thin parts , 2008 .

[13]  Hasan Öktem,et al.  An integrated study of surface roughness for modelling and optimization of cutting parameters during end milling operation , 2009 .

[14]  Duradundi Sawant Badkar,et al.  Parameter optimization of laser transformation hardening by using Taguchi method and utility concept , 2011 .

[15]  Aitzol Lamikiz,et al.  On the influence of cutting speed limitation on the accuracy of wire-EDM corner-cutting , 2007 .

[16]  H. Qiao.  A systematic computer-aided approach to cooling system optimal design in plastic injection molding , 2006 .

[17]  Vishal S. Sharma,et al.  Review of research work in sinking EDM and WEDM on metal matrix composite materials , 2010 .

[18]  Yung-Kuang Yang,et al.  Modeling and Optimization of Injection Molding Process Parameters for Thin-Shell Plastic Parts , 2009 .

[19]  Jianhua Mo,et al.  Springback prediction of high-strength sheet metal under air bending forming and tool design based on GA–BPNN , 2011 .

[20]  P. J. Pawar,et al.  Modelling and optimization of process parameters of wire electrical discharge machining , 2009 .

[21]  Yusuf Kaynak,et al.  Application of Taguchi methods in the optimization of cutting parameters for surface finish and hole diameter accuracy in dry drilling processes , 2009 .

[22]  Klaus Hinkelmann,et al.  Design and Analysis of Experiment , 1975 .

[23]  G. L. Datta,et al.  Prevention of defects in castings using back propagation neural networks , 2008 .

[24]  Dong-Mok Lee,et al.  Optimization of electric discharge machining using simulated annealing , 2009 .

[25]  Yung-Kuang Yang,et al.  Determination of Optimal Parameters for SKD11 CNC Turning Process , 2008 .

[26]  Keivan Ghoseiri,et al.  A simulated annealing approach for the multi-periodic rail-car fleet sizing problem , 2009, Comput. Oper. Res..

[27]  Eberhard Bamberg,et al.  Slicing, cleaning and kerf analysis of germanium wafers machined by wire electrical discharge machining , 2009 .

[28]  Chih-Cherng Chen,et al.  Modeling and analysis of the edge disintegration in the EDM drilling cobalt-bonded tungsten carbide , 2010 .

[29]  Jie Zhang,et al.  Corner error simulation of rough cutting in wire EDM , 2007 .

[30]  Eberhard Bamberg,et al.  Experimental investigation of wire electrical discharge machining of gallium-doped germanium , 2008 .