Distinct element method simulation of an analogue for a highly interlocked, non-persistently jointed rockmass
暂无分享,去创建一个
[1] David Oskar Potyondy,et al. The bonded-particle model as a tool for rock mechanics research and application: current trends and future directions , 2015 .
[2] W. Bawden,et al. DEM Simulation of Direct Shear: 2. Grain Boundary and Mineral Grain Strength Component Influence on Shear Rupture , 2014, Rock Mechanics and Rock Engineering.
[3] W. Bawden,et al. DEM Simulation of Direct Shear: 1. Rupture Under Constant Normal Stress Boundary Conditions , 2014, Rock Mechanics and Rock Engineering.
[4] P. K. Kaiser,et al. Strength degradation of non-persistently jointed rockmass , 2013 .
[5] Tai-Tien Wang,et al. Modeling the anisotropic behavior of jointed rock mass using a modified smooth-joint model , 2013 .
[6] Bo-Hyun Kim,et al. Rock mass strength at depth and implications for pillar design , 2011 .
[7] Diego Mas Ivars,et al. The synthetic rock mass approach for jointed rock mass modelling , 2011 .
[8] John Hadjigeorgiou,et al. Estimating geometrical and mechanical REV based on synthetic rock mass models at Brunswick Mine , 2010 .
[9] Fulvio Tonon,et al. Calibration of a discrete element model for intact rock up to its peak strength , 2010 .
[10] Davide Elmo,et al. An Integrated Numerical Modelling–Discrete Fracture Network Approach Applied to the Characterisation of Rock Mass Strength of Naturally Fractured Pillars , 2010 .
[11] Fulvio Tonon,et al. Modeling Lac du Bonnet granite using a discrete element model , 2009 .
[12] John Hadjigeorgiou,et al. Stability analysis of vertical excavations in hard rock by integrating a fracture system into a PFC model , 2009 .
[13] Sheng-Qi Yang,et al. Experimental Investigation on Strength and Failure Behavior of Pre-cracked Marble Under Conventional Triaxial Compression , 2008 .
[14] L. Anand,et al. On micro-cracking, inelastic dilatancy, and the brittle-ductile transition in compact rocks: A micro-mechanical study , 2008 .
[15] C. Martin,et al. A clumped particle model for rock , 2007 .
[16] Jeoung Seok Yoon,et al. Application of experimental design and optimization to PFC model calibration in uniaxial compression simulation , 2007 .
[17] P. Cundall,et al. A bonded-particle model for rock , 2004 .
[18] V. Hajiabdolmajid,et al. Modelling brittle failure of rock , 2002 .
[19] F. Pellet,et al. Mechanical damage of an anisotropic porous rock in cyclic triaxial tests , 2002 .
[20] Brian McPherson,et al. Simulation of sedimentary rock deformation: Lab‐scale model calibration and parameterization , 2002 .
[21] C. D. Martin,et al. The strength of hard-rock pillars , 2000 .
[22] P. K. Kaiser,et al. Hoek-Brown parameters for predicting the depth of brittle failure around tunnels , 1999 .
[23] Evert Hoek,et al. Practical estimates of rock mass strength , 1997 .
[24] P J Lunder,et al. Determination of the strength of hard-rock mine pillars , 1997 .
[25] J. Cogan. Support of Underground Excavations in Hard Rock , 1996 .
[26] N. A. Chandler,et al. The progressive fracture of Lac du Bonnet granite , 1994 .
[27] C. Derek Martin,et al. The effect of sample disturbance on laboratory properties of Lac du Bonnet granite , 1994 .
[28] E. T. Brown,et al. EMPIRICAL STRENGTH CRITERION FOR ROCK MASSES , 1980 .
[29] E. T. Brown,et al. Underground excavations in rock , 1980 .
[30] N. R. Morgenstern,et al. Locked sands , 1979, Quarterly Journal of Engineering Geology.
[31] Z. T. Bieniawski,et al. Suggested methods for determining the uniaxial compressive strength and deformability of rock materials: Part 1. Suggested method for determining deformability of rock materials in uniaxial compression , 1979 .
[32] Z. T. Bieniawski,et al. Suggested methods for determining the uniaxial compressive strength and deformability of rock materials: Part 1. Suggested method for determination of the uniaxial compressive strength of rock materials , 1979 .
[33] P. Cundall,et al. A discrete numerical model for granular assemblies , 1979 .
[34] M. Dusseault,et al. Shear strength of Athabasca Oil Sands , 1978 .
[35] E. T. Brown,et al. The critical state concept applied to rock , 1978 .
[36] R. L. Berger,et al. Fracturing characteristics of two granites , 1975 .
[37] J. C. Jaeger,et al. The Mechanical Properties of an Interlocked Low-Porosity Aggregate , 1968 .
[38] M. Paterson,et al. EXPERIMENTAL DEFORMATION AND FAULTING IN WOMBEYAN MARBLE , 1958 .
[39] N. Bahrani,et al. A Comparison Between 2D and 3D Bonded-Particle Models for Rock , 2013 .
[40] Jeoung Seok Yoon,et al. Simulating fracture and friction of Aue granite under confined asymmetric compressive test using clumped particle model , 2012 .
[41] Navid Bahrani,et al. Evaluation of PFC2D Grain-Based Model For Simulation of Confinement-Dependent Rock Strength Degradation And Failure Processes , 2011 .
[42] N. Bahrani,et al. Discrete Element Modeling of Drilling-Induced Core Damage And Its Influence On Laboratory Properties of Lac De Bonnet Granite , 2011 .
[43] N. Bahrani,et al. Influence of Confinement Dependent Failure Processes on Rock Mass Strength at Depth , 2011 .
[44] David J. Williams,et al. Investigating the Effect of Cyclic Loading on the Indirect Tensile Strength of Rocks , 2011, Rock Mechanics and Rock Engineering.
[45] Evert Hoek,et al. HOEK-BROWN FAILURE CRITERION - 2002 EDITION , 2002 .
[46] Mark S. Diederichs,et al. Instability of hard rockmasses, the role of tensile damage and relaxation , 2000 .
[47] P. K. Kaiser,et al. Progressive spalling in massive brittle rock , 2000 .
[48] N. G. Gerogiannopoulos. A critical state approach to rock mechanics , 1977 .
[49] V. S. Vutukuri,et al. Handbook on Mechanical Properties of Rocks , 1977 .
[50] P. Cundall. A computer model for simulating progressive, large-scale movements in blocky rock systems , 1971 .
[51] F. Patton. Multiple Modes of Shear Failure In Rock , 1966 .