Numerical study of flow uniformity and pressure characteristics within a microchannel array with triangular manifolds

Abstract Flow uniformity among individual channels within a microchannel array can be a significant factor affecting the performance of laminated structured micro-devices. In this study, numerical modeling is used to quantitatively investigate the impact of the geometry of the right triangular manifold and the dimensions of microchannels on desired uniformity and pressure drop. The CFD tool COMSOL is used to perform the simulations within the low-Reynolds number system (5 ≤ Re ≤ 25). In our biomedical application, it is important to have low dead volume and residence time in the manifolds. A methodical approach is introduced to identify a design that balances low manifold volume and maintenance of flow uniformity. It has also been shown that including a short vertical spacing at the corner of manifolds is critical to achieving a high level of flow uniformity. Careful analysis and physical interpretation of trends herein enables a more intuitive approach to array design.

[1]  L. Falk,et al.  Rapid design of channel multi-scale networks with minimum flow maldistribution , 2009 .

[2]  D. P. Sekulic,et al.  Fundamentals of Heat Exchanger Design , 2003 .

[3]  Jon T. Van Lew,et al.  CFD STUDY ON FLOW DISTRIBUTION UNIFORMITY IN FUEL DISTRIBUTORS HAVING MULTIPLE STRUCTURAL BIFURCATIONS OF FLOW CHANNELS , 2010 .

[4]  Chin‐Hsiang Cheng,et al.  The effects of geometric and operating conditions on the hydrogen production performance of a micro-methanol steam reformer , 2010 .

[5]  Jc Jaap Schouten,et al.  Single-phase fluid flow distribution and heat transfer in microstructured reactors , 2011 .

[6]  R. Shah.  Laminar Flow Forced convection in ducts , 1978 .

[7]  Ibrahim Hassan,et al.  Experimental Analysis of Microchannel Entrance Length Characteristics Using Microparticle Image Velocimetry , 2010 .

[8]  Asterios Gavriilidis,et al.  Effect of Microchannel Plate Design on Fluid Flow Uniformity at Low Flow Rates , 2007 .

[9]  Yong Tang,et al.  CFD-based Study of Velocity Distribution among Multiple Parallel Microchannels , 2009, J. Comput..

[10]  Longsheng Lu,et al.  Optimal design of complex manifold geometries for uniform flow distribution between microchannels , 2008 .

[11]  Masaru Noda,et al.  CFD-based optimal design of manifold in plate-fin microdevices , 2004 .

[12]  Ralph L. Webb,et al.  Effect of Manifold Design on Flow Distribution in Parallel Micro-Channels , 2003 .

[13]  Yong Tang,et al.  Trend prediction in velocity distribution among microchannels based on the analysis of frictional resistances , 2010 .

[14]  R. Bajura,et al.  Flow Distribution Manifolds , 1976 .

[15]  C. Dalton,et al.  Incompressible Laminar Flow in the Entrance Region of a Rectangular Duct , 1970 .

[16]  Stephen A. Solovitz,et al.  Manifold Design for Micro-Channel Cooling With Uniform Flow Distribution , 2011 .

[17]  Zhou Wei,et al.  Flow Distribution among Microchannels with Asymmetrical Manifolds , 2007, 2007 IEEE International Conference on Control and Automation.

[18]  Young I. Cho,et al.  The effect of header shapes on the flow distribution in a manifold for electronic packaging applications , 1995 .

[19]  M. Saber,et al.  Methodology for multi-scale design of isothermal laminar flow networks , 2011 .

[20]  S. Lakshminarayanan,et al.  Improved Design of Microchannel Plate Geometry for Uniform Flow Distribution , 2008 .

[21]  J. Corriou,et al.  Optimal design for flow uniformity in microchannel reactors , 2002 .

[22]  Hao Yu,et al.  Modeling of velocity distribution among microchannels with triangle manifolds , 2009 .

[23]  Dehuai Zeng,et al.  Qualitative investigation on effects of manifold shape on methanol steam reforming for hydrogen production , 2012 .