Advanced HVAC Control: Theory vs. Reality

Abstract Intelligent control of HVAC equipment is a key step towards improving the energy efficiency of commercial buildings. Although advanced control techniques have been developed and validated under real conditions, numerous buildings are still being poorly controlled due to wrong setpoints, incorrect PID settings, no coordination of individual PID loops, and other practical problems. This paper aims to summarize the major contributors to inefficient HVAC control and outline possible approaches towards better control strategies. Three areas are discussed: performance monitoring tools, rule-based control strategies and model-based predictive control (MPC). Performance monitoring tools help control engineers to quantify the performance of a particular control strategy, compare multiple control strategies among themselves, and define a baseline for such comparisons. Rule-based control strategies utilize various setpoint resets, rules and other heuristics to reduce HVAC energy consumption; however, such methods yield sub-optimal solutions only. Finally, MPC is a powerful and industrially-proven technology for optimal control of complex systems, but its use in building control seems to be so far limited. The paper analyzes challenges and constraints when implementing a control strategy in real projects, and covers topics such as missing sensors, legacy controllers and legislative changes needed to motivate building owners towards more efficient facility management.

[1]  B. Krafthefer,et al.  Automated CO{sub 2} and VOC-based control of ventilation systems under real-time pricing. Final report , 1998 .

[2]  M Morari,et al.  Energy efficient building climate control using Stochastic Model Predictive Control and weather predictions , 2010, Proceedings of the 2010 American Control Conference.

[3]  Victor M. Zavala,et al.  PROACTIVE ENERGY MANAGEMENT FOR NEXT-GENERATION BUILDING SYSTEMS , 2010 .

[4]  Andrew K. Persily,et al.  State-ofthe-Art Review of CO 2 Demand Controlled Ventilation Technology and Application , 2003 .

[5]  Vice President,et al.  AMERICAN SOCIETY OF HEATING, REFRIGERATION AND AIR CONDITIONING ENGINEERS INC. , 2007 .

[6]  Petr Stluka,et al.  Fault Diagnosis of Air Handling Units , 2009 .

[7]  Anastasios I. Dounis,et al.  Advanced control systems engineering for energy and comfort management in a building environment--A review , 2009 .

[8]  Arthur Dexter,et al.  HIERARCHICAL FUZZY RULE-BASED CONTROL OF RENEWABLE ENERGY BUILDING SYSTEMS , 2007 .

[9]  M. J. Brandemuehl,et al.  The impact of demand-controlled and economizer ventilation strategies on energy use in buildings , 1999 .

[10]  Nathan Mendes,et al.  Predictive controllers for thermal comfort optimization and energy savings , 2008 .

[11]  Jana Trojanová,et al.  Embedded Controllers for Increasing HVAC Energy Efficiency by Automated Fault Diagnostics , 2010 .

[12]  J. Schein.  An information model for building automation systems , 2007 .

[13]  Mingsheng Liu,et al.  Minimum airflow reset of single duct VAV terminal boxes , 2009 .

[14]  David E. Claridge,et al.  Single-Duct Constant Air Volume System Supply Air Temperature Reset: Using Return Air Temperature or Outside Air Temperature? , 2003 .

[15]  J. Ploennigs,et al.  Analyse building performance data for energy-efficient building operation , 2009 .

[16]  Dimitrios Gyalistras,et al.  Potential Assessment of Rule-Based Control for Integrated Room Automation , 2010 .

[17]  Volodymyr Vasyutynskyy,et al.  PASSIVE MONITORING OF CONTROL LOOPS IN BUILDING AUTOMATION , 2005 .