Molecular imprinting method for fabricating novel glucose sensor: polyvinyl acetate electrode reinforced by MnO2/CuO loaded on graphene oxide nanoparticles.

An enzyme free glucose sensor was prepared by a molecular imprinting method (MIP). The procedure was developed by in situ preparation of a new polyvinyl acetate (PVA) electrode reinforced by MnO2/CuO loaded on graphene oxide (GO) nanoparticles (PVA/MnO2@GO/CuO). The nanocomposite was modified in the presence of glucose and then imprinted. A carbone paste method with voltammetry was used in the fabrication of the sensor from prepared MIP nanocomposite. PVA/MnO2@GO/CuO electrode was characterized by X-ray diffraction, FT-IR spectroscopy and scanning electron microscopy. Electrocatalytic activity of the electrode toward glucose oxidation was then investigated by cyclic voltammetry in alkaline medium. The results show that the response of PVA/MnO2@GO/CuO MIP is much higher than PVA/MnO2@GO/CuO non-imprinted electrode toward glucose oxidation. The detection limit was 53μM, and the sensor responses are linear for concentrations from 0.5 to 4.4mM. Relative standard deviations for intra- and inter-day determination were less than 6.0%. The relative recoveries for different samples were 96%.

[1]  D. Wong,et al.  Cathodic deposition of binary nickel-cobalt hydroxide for non-enzymatic glucose sensing , 2014 .

[2]  Jian-ya Wang,et al.  Enzymatic Determination of Glucose by Optical-Fiber Sensor Sequential Injection Renewable Surface Spectrophotometry , 2006 .

[3]  Jing Luo,et al.  Electrochemical sensor for bovine hemoglobin based on a novel graphene-molecular imprinted polymers composite as recognition element , 2014 .

[4]  M. Gholivand,et al.  Electrooxidation behavior of warfarin in Fe3O4 nanoparticles modified carbon paste electrode and its determination in real samples. , 2015, Materials science & engineering. C, Materials for biological applications.

[5]  Amrita Prasad,et al.  Molecularly imprinted polymer based enantioselective sensing devices: a review. , 2015, Analytica chimica acta.

[6]  May-Britt Hägg,et al.  Polyvinyl acetate/titanium dioxide nanocomposite membranes for gas separation , 2013 .

[7]  Shuhua Zhu,et al.  Simultaneous separation and determination of fructose, sorbitol, glucose and sucrose in fruits by HPLC-ELSD. , 2014, Food chemistry.

[8]  O. Geschke,et al.  Fabrication of an all-polymer electrochemical sensor by using a one-step hot embossing procedure , 2010 .

[9]  H. Deng,et al.  Progress on the morphological control of conductive network in conductive polymer composites and the use as electroactive multifunctional materials , 2014 .

[10]  U. Tamer,et al.  An enzyme free potentiometric detection of glucose based on a conducting polymer poly (3-aminophenyl boronic acid-co-3-octylthiophene) , 2013 .

[11]  D. Pijanowska,et al.  On-line flow injection analysis using gold particle modified carbon electrode amperometric detection for real-time determination of glucose in immobilized enzyme hydrolysate of waste bamboo chopsticks , 2012 .

[12]  F. Bakar,et al.  Linearity study on detection and quantification limits for the determination of avermectins using linear regression , 2014, Journal of food and drug analysis.

[13]  M. Nabid,et al.  Nonenzymatic glucose and hydrogen peroxide sensors based on catalytic properties of palladium nanoparticles/poly(3,4-ethylenedioxythiophene) nanofibers , 2014 .

[14]  Wei Huang,et al.  Electrochemical fabrication of stalactite-like copper micropillar arrays via surface rebuilding for ultrasensitive nonenzymatic sensing of glucose , 2015 .

[15]  M. Macka,et al.  Molecular imprinted polymeric porous layers in open tubular capillaries for chiral separations. , 2014, Journal of chromatography. A.

[16]  T. Alizadeh,et al.  Graphene/graphite/molecularly imprinted polymer nanocomposite as the highly selective gas sensor for nitrobenzene vapor recognition , 2014 .

[17]  Evaporative assembly of graphene oxide for electric double-layer capacitor electrode application , 2015 .

[18]  Xiaoya Liu,et al.  Glucose sensors based on electrodeposition of molecularly imprinted polymeric micelles: a novel strategy for MIP sensors. , 2011, Biosensors & bioelectronics.

[19]  Yaxi Hu,et al.  Detection of melamine in milk using molecularly imprinted polymers-surface enhanced Raman spectroscopy. , 2015, Food chemistry.

[20]  S. Manzoor,et al.  Molecularly imprinted solid phase extraction of fluconazole from pharmaceutical formulations. , 2015, Talanta.

[21]  Luiz Diego Marestoni,et al.  A new biomimetic sensor based on molecularly imprinted polymers for highly sensitive and selective determination of hexazinone herbicide , 2015 .

[22]  Y. Xiong,et al.  Bimetallic MCo (M = Cu, Fe, Ni, and Mn) nanoparticles doped-carbon nanofibers synthetized by electrospinning for nonenzymatic glucose detection , 2015 .

[23]  L. Kong,et al.  Fabrication of conductive elastic nanocomposites via framing intact interconnected graphene networks , 2014 .

[24]  K. Oksman,et al.  Tensile behavior, morphology and viscoelastic analysis of cellulose nanofiber-reinforced (CNF) polyvinyl acetate (PVAc) , 2011 .

[25]  A. Bond,et al.  One pot synthesis of poly(5-hydroxyl-1,4-naphthoquinone) stabilized gold nanoparticles using the monomer as the reducing agent for nonenzymatic electrochemical detection of glucose. , 2015, Analytica chimica acta.

[26]  C. Chen,et al.  Fabrication of Flower-shaped Pt-Au-graphene Nanostructure and its Application in Electrochemical Detection of Glucose , 2014 .

[27]  K. Rhee,et al.  A review on carbon nanotubes and graphene as fillers in reinforced polymer nanocomposites , 2015 .

[28]  Özlem Biçen Ünlüer,et al.  Separation and purification of hyaluronic acid by embedded glucuronic acid imprinted polymers into cryogel. , 2013, Journal of chromatography. B, Analytical technologies in the biomedical and life sciences.

[29]  C. Delerue-Matos,et al.  MIP-graphene-modified glassy carbon electrode for the determination of trimethoprim. , 2014, Biosensors & bioelectronics.

[30]  I. Hussain,et al.  Voltammetric detection of As(III) with Porphyridium cruentum based modified carbon paste electrode biosensor. , 2014, Biosensors & bioelectronics.

[31]  Jiaxing Huang,et al.  Graphene Oxide: Some New Insights into an Old Material , 2014 .

[32]  T. Larsen,et al.  Fluorometric determination of free glucose and glucose 6-phosphate in cows' milk and other opaque matrices. , 2015, Food chemistry.

[33]  G. D’Agostino,et al.  High selectivity and sensitivity sensor based on MIP and SPR in tapered plastic optical fibers for the detection of l-nicotine , 2014 .

[34]  Qiaohong He,et al.  In-channel modification of biosensor electrodes integrated on a polycarbonate microfluidic chip for micro flow-injection amperometric determination of glucose , 2010 .

[35]  Nicole Jaffrezic-Renault,et al.  1,3,5-Trinitrotoluene detection by a molecularly imprinted polymer sensor based on electropolymerization of a microporous-metal-organic framework , 2015 .

[36]  V. Bhethanabotla,et al.  Preparation of substituted polyaniline/chitosan composites by in situ electropolymerization and their application to glucose sensing , 2010 .

[37]  Li Ruiyi,et al.  Novel graphene-gold nanohybrid with excellent electrocatalytic performance for the electrochemical detection of glucose , 2015 .

[38]  G. Mustafa,et al.  MIP sensors on the way to biotech applications: Targeting selectivity , 2013 .

[39]  Wei Chen,et al.  Manipulating the electronic and chemical properties of graphene via molecular functionalization , 2013 .