Effect of Welding Residual Stress and Distortion on Ship Hull Structural Performance

[1]  Georges Akhras,et al.  Ultimate strength of a box girder simulating the hull of a ship , 1998 .

[2]  Pedro V. Marcal,et al.  A NUMERICAL THERMO-MECHANICAL MODEL FOR THE WELDING AND SUBSEQUENT LOADING OF A FABRICATED STRUCTURE , 1973 .

[3]  Yukio Ueda,et al.  ANALYSIS OF THERMAL ELASTIC-PLASTIC STRESS AND STRAIN DURING WELDING BY FINITE ELEMENT METHOD , 1971 .

[4]  M. Kmiecik,et al.  Statistics of ship plating distortions , 1995 .

[5]  C. S. Smith,et al.  STRENGTH OF STIFFENED PLATING UNDER COMBINED COMPRESSION AND LATERAL PRESSURE , 1992 .

[6]  C J Allum,et al.  CONTROL OF FUSION CHARACTERISTICS IN PULSED CURRENT MIG WELDING. PART 2 - SIMPLE MODEL OF FUSION CHARACTERISTICS , 1985 .

[7]  Jørgen Juncher Jensen,et al.  Residual Stresses and Deformations in Steel Structures , 2001 .

[8]  Tetsuya Yao.  Ultimate Longitudinal Strength of Ship Hull Girder Historical Review And State of the Art , 1999 .

[9]  D. Faulkner.  A REVIEW OF EFFECTIVE PLATING TO BE USED IN THE ANALYSIS OF STIFFENED PLATING IN BENDING AND COMPRESSION , 1973 .

[10]  Sindo Kou,et al.  Heat Flow in Welding , 2003 .

[11]  Lars-Erik Lindgren,et al.  FINITE ELEMENT MODELING AND SIMULATION OF WELDING. PART 2: IMPROVED MATERIAL MODELING , 2001 .

[12]  Torgeir Moan,et al.  Residual Stress Shakedown in Typical Weld Joints and Its Effect on Fatigue of FPSOs , 2007 .

[13]  A C Antoniou.  ON THE MAXIMUM DEFLECTION OF PLATING IN NEWLY BUILT SHIPS , 1980 .

[14]  Jeom Kee Paik,et al.  A concise introduction to the idealized structural unit method for nonlinear analysis of large plated structures and its application , 2003 .

[15]  D. Deng.  FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effects , 2009 .

[16]  Lars-Erik Lindgren,et al.  Deformations and stresses in welding of shell structures , 1988 .

[17]  Thomas W. Eagar,et al.  Temperature fields produced by traveling distributed heat sources , 1983 .

[18]  C. S. Smith.  Compressive Strength of Welded Steel Ship Grillages , 1975 .

[19]  José Manuel Gordo,et al.  APPROXIMATE METHOD TO EVALUATE THE HULL GIRDER COLLAPSE STRENGTH , 1996 .

[20]  Yi Liu,et al.  Effect of welding sequence on residual stress and distortion in flat-bar stiffened plates , 2010 .

[21]  Masahiko Fujikubo,et al.  ISUM Rectangular Plate Element with New Lateral Shape Functions (2nd Report) - Stiffened Plates under Biaxial Thrust - , 2000 .

[22]  M. Abdel-Karim,et al.  Shakedown of complex structures according to various hardening rules , 2005 .

[23]  G L Datta,et al.  Three-Dimensional Finite Element Analysis to Predict the Effects of Shielded Metal Arc Welding Process Parameters on Temperature Distributions and Weldment Zones in Butt and One-Sided Fillet Welds , 2006 .

[24]  A. B. Stavovy,et al.  ULTIMATE LONGITUDINAL STRENGTH , 1970 .

[25]  Preben Terndrup Pedersen,et al.  Strength of ship plates under combined loading , 2002 .

[26]  Maher Y. A. Younan,et al.  Study of the Effect of Boundary Conditions on Residual Stresses in Welding Using Element Birth and Element Movement Techniques , 2003 .

[27]  Ueda Yukio,et al.  The idealized structural unit method and its application to deep girder structures , 1984 .

[28]  B. L. Josefson,et al.  Three-Dimensional Finite Element Analysis of Temperatures and Stresses in a Single-Pass Butt-Welded Pipe , 1990 .

[29]  Jeom Kee Paik,et al.  Ultimate limit state design technology for aluminum multi-hull ship structures , 2005 .

[30]  C A Carlsen,et al.  SIMPLIFIED COLLAPSE ANALYSIS OF STIFFENED PLATES , 1977 .

[31]  J. C. Chapman,et al.  STRENGTH AND STIFFNESS OF SHIPS' PLATING UNDER IN-PLANE COMPRESSION AND TENSION , 1987 .

[32]  Theodore V. Galambos,et al.  Guide to stability design criteria for metal structures , 1998 .

[33]  J. Goldak,et al.  A new finite element model for welding heat sources , 1984 .

[34]  Maher Y. A. Younan,et al.  3-D Finite Element Modeling of the Welding Process Using Element Birth and Element Movement Techniques , 2003 .

[35]  M. Cronje,et al.  Finite Element Modelling of Shielded Metal Arc Welding , 2005 .

[36]  A. K. Thayamballi,et al.  Some recent developments on ultimate limit state design technology for ships and offshore structures , 2006 .

[37]  Jeom Kee Paik,et al.  Ultimate limit state design of steel-plated structures , 2003 .

[38]  M. Crisfield.  FULL-RANGE ANALYSIS OF STEEL PLATES AND STIFFENED PLATING UNDER UNIAXIAL COMPRESSION , 1975 .

[39]  Yao Chen,et al.  EVALUATION OF THE LONGITUDINAL ULTIMATE STRENGTH OF VARIOUS SHIP HULL CONFIGURATIONS , 1985 .

[40]  Naoyuki Suzuki,et al.  Analytical solutions for transient temperature of semi-infinite body subjected to 3-D moving heat sources , 1999 .

[41]  Lars-Erik Lindgren,et al.  FINITE ELEMENT MODELING AND SIMULATION OF WELDING. PART 3: EFFICIENCY AND INTEGRATION , 2001 .

[42]  Sara Y. Kenno,et al.  Residual stress distributions in ship hull specimens , 2010 .

[43]  J. M. Frankland,et al.  The Strength of Ship Plating Under Edge Compression , 2010 .

[44]  Lars-Erik Lindgren,et al.  FINITE ELEMENT MODELING AND SIMULATION OF WELDING PART 1: INCREASED COMPLEXITY , 2001 .

[45]  José Manuel Gordo,et al.  Design methods for stiffened plates under predominantly uniaxial compression , 1997 .

[46]  Maher Y. A. Younan,et al.  Introduction of the Element Interaction Technique for Welding Analysis and Simulation , 2005 .

[47]  D. Deng,et al.  Prediction of welding distortion and residual stress in a thin plate butt-welded joint , 2008 .

[48]  J B Caldwell,et al.  ULTIMATE LONGITUDINAL STRENGTH OF SHIPS - A CASE STUDY , 1990 .

[49]  Robert S. Dow.  TESTING AND ANALYSIS OF A 1/3-SCALE WELDED STEEL FRIGATE MODEL , 1991 .

[50]  C. S. Smith,et al.  Influence of Local Compressive Failure on Ultimate Longitudinal Strength of a Ship's Hull , 1977 .

[51]  K E Moxham,et al.  THEORETICAL PREDICTION OF THE STRENGTH OF WELDED STEEL PLATES IN COMPRESSION , 1971 .

[52]  D. Faulkner,et al.  Synthesis of welded grillages to withstand compression and normal loads , 1973 .

[53]  Anders Melchior Hansen.  Strength of midship sections , 1996 .