Thermal performance evaluation of a massive brick wall under real weather conditions via the Conduction Transfer function method

Abstract The reliable estimation of buildings energy needs for cooling and heating is essential for any eventual thermal improvement of the envelope or the HVAC equipment. This paper presents an interesting method to evaluate the thermal performance of a massive wall by using the frequency-domain regression (FDR) method to calculate CTF coefficients by means of the Fourier transform. The method is based on the EN ISO 13786 (2007) procedure by using the Taylor expansion for the elements of the heat matrix. Numerical results were validated through an experimental heating box with stochastic boundary conditions on one side of the wall representing real weather conditions and constant temperature profile on the other side representing the inside ambiance in real cases. Finally, a frequency analysis was performed in order to assess the validity and accuracy of the method used. The results show that development to the second order is sufficient to predict the thermal behavior of the studied massive wall in the range of frequencies encountered in the building applications (one hour time step). This method is useful for thermal transfer analysis in real weather conditions where the outside temperature is stochastic; it also allows the evaluation of the thermal performance of a wall through a frequency analysis.

[1]  Youming Chen,et al.  Frequency-domain regression method for estimating CTF models of building multilayer constructions , 2001 .

[2]  Yves Bertin,et al.  Analyse de la qualité de modèles nodaux réduits à l'aide de la méthode des quadripôles , 1999 .

[3]  Zoubeir Lafhaj,et al.  Dynamic thermal performance of three types of unfired earth bricks , 2016 .

[4]  Shengwei Wang,et al.  An improvement to frequency-domain regression method for calculating conduction transfer functions of building walls , 2008 .

[5]  Shengwei Wang,et al.  Simplified building model for transient thermal performance estimation using GA-based parameter identification , 2006 .

[6]  Gilles Fraisse,et al.  Development of a simplified and accurate building model based on electrical analogy , 2002 .

[7]  Milorad Bojić,et al.  Optimization of thermal insulation to achieve energy savings in low energy house (refurbishment) , 2014 .

[8]  Didier Defer,et al.  Characterisation of the thermal effusivity of a partially saturated soil by the inverse method in the frequency domain , 2003 .

[9]  Shengwei Wang,et al.  Transient heat flow calculation for multilayer constructions using a frequency-domain regression method , 2003 .

[10]  Shengwei Wang,et al.  A simplified dynamic model for existing buildings using CTF and thermal network models , 2008 .

[11]  Peng Xu,et al.  Estimating hourly cooling load in commercial buildings using a thermal network model and electricity submetering data , 2016 .

[12]  Andrea Gasparella,et al.  Thermal dynamic transfer properties of the opaque envelope: Analytical and numerical tools for the a , 2011 .

[13]  O. Kaynakli,et al.  A study on residential heating energy requirement and optimum insulation thickness , 2008 .

[14]  Omar M. Al-Rabghi,et al.  Utilizing transfer function method for hourly cooling load calculations , 1997 .

[15]  Olivier Carpentier,et al.  In situ thermal properties characterization using frequential methods , 2008 .

[16]  Shengwei Wang,et al.  A new procedure for calculating periodic response factors based on frequency domain regression method , 2005 .

[17]  Zoubeir Lafhaj,et al.  Thermal performance of unfired clay bricks used in construction in the north of France: Case study , 2015 .

[18]  Behdad Moghtaderi,et al.  Modelling of wall heat transfer using modified conduction transfer function, finite volume and complex Fourier analysis methods , 2010 .

[19]  Shengwei Wang,et al.  Optimal simplified thermal models of building envelope based on frequency domain regression using genetic algorithm , 2007 .

[20]  Koray Ulgen,et al.  Experimental and theoretical investigation of effects of wall’s thermophysical properties on time lag and decrement factor , 2002 .

[21]  Shengwei Wang,et al.  Short time step heat flow calculation of building constructions based on frequency-domain regression method , 2009 .

[22]  Guido Sassi,et al.  A reference device for evaluating the thermal behavior of installed multilayered wall containing a phase change material , 2015 .

[23]  H. Asan.  Numerical computation of time lags and decrement factors for different building materials , 2006 .

[24]  Jeffrey D. Spitler,et al.  Applicability of calculation methods for conduction transfer function of building constructions , 2009 .

[25]  Figen Balo,et al.  DETERMINATION OF THE ENERGY SAVINGS AND THE OPTIMUM INSULATION THICKNESS IN THE FOUR DIFFERENT INSULATED EXTERIOR WALLS , 2010 .

[26]  Liwei Tian,et al.  A study on optimum insulation thicknesses of external walls in hot summer and cold winter zone of China , 2009 .