Energy audit of schools by means of cluster analysis

Abstract More than 30 % of the Italian schools have very low energy efficiency due to aging or poor quality of construction. The current European policy on energy saving, with the Commission Delegated Regulation (EU) 244/2012, recommends a cost-optimal analysis of retrofit improvements, starting from some reference buildings. One relevant issue is the definition of a set of reference buildings effectively representative of the considered stock. A possible solution could be found using data mining techniques, such as the K-means clustering method, which allows the division of a large sample into more homogeneous and small groups. This work adopts the cluster analysis to find out a few school buildings representative of a sample of about 60 schools in the province of Treviso, North-East of Italy, thus reducing the number of buildings to be analyzed in detail to optimize the energy retrofit measures. Real consumption data of the scholastic year 2011–2012 were correlated to buildings characteristics through regression and the parameters with the highest correlation with energy consumption levels used in cluster analysis to group schools. This method has supported the definition of representative architectural types and the identification of a small number of parameters determinant to assess the energy consumption for air heating and hot water production.

[1]  Fábio Gonçalves Jota,et al.  Building load management using cluster and statistical analyses , 2011 .

[2]  Junjie Wu,et al.  Advances in K-means clustering: a data mining thinking , 2012 .

[3]  G. Mihalakakou,et al.  Using principal component and cluster analysis in the heating evaluation of the school building sector , 2010 .

[4]  Patxi Hernandez,et al.  Development of energy performance benchmarks and building energy ratings for non-domestic buildings: An example for Irish primary schools , 2008 .

[5]  C. Filippín.  Benchmarking the energy efficiency and greenhouse gases emissions of school buildings in central Argentina , 2000 .

[6]  M. N. Assimakopoulos,et al.  Using intelligent clustering techniques to classify the energy performance of school buildings , 2007 .

[7]  André De Herde,et al.  Definition of occupant behaviour patterns with respect to ventilation for apartments from the real estate market in Santiago de Chile , 2011 .

[8]  Supachart Chungpaibulpatana,et al.  Assessment of potential energy saving using cluster analysis: A case study of lighting systems in buildings , 2012 .

[9]  S. Corgnati,et al.  A method for heating consumption assessment in existing buildings: A field survey concerning 120 Italian schools , 2008 .

[10]  Ali M. Malkawi,et al.  A new methodology for building energy performance benchmarking: An approach based on intelligent clustering algorithm , 2014 .

[11]  S. P. Lloyd,et al.  Least squares quantization in PCM , 1982, IEEE Trans. Inf. Theory.

[12]  Jelena Srebric,et al.  Cluster analysis of simulated energy use for LEED certified U.S. office buildings , 2014 .

[13]  Kevin R Grosskopf,et al.  Benchmarking energy performance of building envelopes through a selective residual-clustering approach using high dimensional dataset , 2014 .

[14]  Vincenc Butala,et al.  Energy consumption and potential energy savings in old school buildings , 1999 .

[15]  Benjamin C. M. Fung,et al.  A methodology for identifying and improving occupant behavior in residential buildings , 2011 .

[16]  Celina Filippín,et al.  Evaluation of heating energy consumption patterns in the residential building sector using stepwise selection and multivariate analysis , 2013 .

[17]  Paul Strachan,et al.  Developing archetypes for domestic dwellings: An Irish case study , 2012 .

[18]  A. Dimoudi,et al.  Energy monitoring and conservation potential in school buildings in the C' climatic zone of Greece , 2009 .

[19]  Umberto Desideri,et al.  Analysis of energy consumption in the high schools of a province in central Italy , 2002 .

[20]  Michalis Vazirgiannis,et al.  c ○ 2001 Kluwer Academic Publishers. Manufactured in The Netherlands. On Clustering Validation Techniques , 2022 .