Prediction of damage and fatigue life of high-temperature flip chip assembly interconnections at operations
暂无分享,去创建一个
[1] Ndy Ekere,et al. Investigation of thermal management materials for automotive electronic control units , 2011 .
[2] Y. L. Lin,et al. Effect of Cu concentration on the reactions between Sn-Ag-Cu solders and Ni , 2002 .
[4] M. C. Shaw. High-Performance Packaging of Power Electronics , 2003 .
[5] M. Siniawski,et al. Overview of Fatigue Failure of Pb-Free Solder Joints in CSP/BGA/Flip-Chip Applications , 2009 .
[6] Guo-Quan Lu,et al. Three-dimensional flip-chip on flex packaging for power electronics applications , 2001 .
[7] Michael Pecht,et al. Health assessment and prognostics of electronic products , 2009, 2009 8th International Conference on Reliability, Maintainability and Safety.
[8] R. Boudreau. Foreword contributions from the 50th electronic components and technology conference , 2001 .
[9] Lee Teck Kheng,et al. The effect of ball pad designs and substrate materials on the performance of second-level interconnects , 2003, Proceedings of the 5th Electronics Packaging Technology Conference (EPTC 2003).
[10] Marc P.Y. Desmulliez,et al. Optimisation modelling for thermal fatigue reliability of lead‐free interconnects in fine‐pitch flip‐chip packaging , 2009 .
[11] V. Zaitsev,et al. Reversible temper embrittlement in a steel deformed under high pressure , 1981 .
[12] Z. Wang,et al. Reliability of high temperature solder alternatives , 2006, Microelectron. Reliab..
[13] Chiang-Ho Cheng,et al. The numerical analysis of strain behavior at the solder joint and interface in a flip chip package , 2006 .
[14] Sidharth,et al. Board level solder reliability versus ramp rate and dwell time during temperature cycling , 2003 .
[15] D. Lau,et al. Computational model validation with experimental data from temperature cycling tests of PBGA assemblies for the analysis of board level solder joint reliability , 2004, 5th International Conference on Thermal and Mechanical Simulation and Experiments in Microelectronics and Microsystems, 2004. EuroSimE 2004. Proceedings of the.
[16] Karl J. L. Geisler,et al. Thermomechanical modeling and evaluation of the impacts of BGA warpage on low-cycle solder fatigue , 2010, 2010 Proceedings 60th Electronic Components and Technology Conference (ECTC).
[17] Tomi Laurila,et al. Interfacial reactions between lead-free solders and common base materials , 2005 .
[18] Donggun Lee,et al. Effect of glue on reliability of flip chip BGA packages under thermal cycling , 2010, Microelectron. Reliab..
[19] Emeka H. Amalu,et al. High temperature reliability of lead-free solder joints in a flip chip assembly , 2012 .
[20] K. Goodson,et al. Managing heat for electronics , 2005 .
[21] A. Govind,et al. Growth prediction of tin/copper intermetallics formed between 63/37 Sn/Pb and OSP coated copper solder pads for a flip chip application , 2002 .
[22] A. Primavera,et al. Reliability and Failure Analysis of Lead-Free Solder Joints , 2002 .
[23] L. Anand,et al. An internal variable constitutive model for hot working of metals , 1989 .
[24] Chi Chuen Lo. Numerical prediction and experimental validation of flip chip solder joint geometry for MEMS applications , 2008 .
[25] L. Anand. Constitutive equations for hot-working of metals , 1985 .
[26] Periannan Arulvanan,et al. Effects of process conditions on reliability, microstructure evolution and failure modes of SnAgCu solder joints , 2006, Microelectron. Reliab..
[27] H. Noma,et al. IMC bonding for 3D interconnection , 2010, 2010 Proceedings 60th Electronic Components and Technology Conference (ECTC).
[28] M. O. Alam,et al. Effect of 0.5 wt % Cu in Sn-3.5%Ag solder balls on the solid state interfacial reaction with Au/Ni/Cu bond pads for ball grid array (BGA) applications , 2005 .
[29] T.H. Low,et al. Isothermal and thermal cycling aging on IMC growth rate in lead-free and lead-based solder interface , 2005, IEEE Transactions on Components and Packaging Technologies.
[30] F. Patrick McCluskey,et al. High Temperature Electronics , 1997 .
[31] Raj N. Master,et al. Impact of usage conditions on solder joint fatigue life , 2010, 2010 Proceedings 60th Electronic Components and Technology Conference (ECTC).
[32] Y. C. Chan,et al. Elimination of Au-embrittlement in solder joints on Au/Ni metallization , 2004 .
[33] R.W. Johnson,et al. The changing automotive environment: high-temperature electronics , 2004, IEEE Transactions on Electronics Packaging Manufacturing.
[34] I. C. Ume,et al. Thermomechanical Reliability Study of Flip Chip Solder Bumps: Using Laser Ultrasound Technique and Finite Element Method , 2008, IEEE Transactions on Advanced Packaging.
[35] E.H. Amalu,et al. High temperature electronics: R&D challenges and trends in materials, packaging and interconnection technology , 2009, 2009 2nd International Conference on Adaptive Science & Technology (ICAST).
[36] S. H. Ho,et al. Board level reliability of PBGA using flex substrate , 2001, Microelectron. Reliab..
[37] B. A. Zahn. Impact of ball via configurations on solder joint reliability in tape-based, chip-scale packages , 2002, 52nd Electronic Components and Technology Conference 2002. (Cat. No.02CH37345).
[38] A. Syed. Accumulated creep strain and energy density based thermal fatigue life prediction models for SnAgCu solder joints , 2004, 2004 Proceedings. 54th Electronic Components and Technology Conference (IEEE Cat. No.04CH37546).
[39] D. Das,et al. Thermal Cycling Reliability of Lead-Free Solders (SAC305 and Sn3.5Ag) for High-Temperature Applications , 2011, IEEE Transactions on Device and Materials Reliability.
[41] Chris Bailey,et al. Fracture mechanics analysis of solder joint intermetallic compounds in shear test , 2009 .
[42] Ndy Ekere,et al. Investigation Of The Effects Of Reflow Profile Parameters On Lead‐free Solder Bump Volumes And Joint Integrity , 2011 .
[43] Andrew K. Kercher,et al. Reliability of Sn-3.5Ag solder joints in high temperature packaging applications , 2010, 2010 Proceedings 60th Electronic Components and Technology Conference (ECTC).