Effects of salivary pH on coating durability of two different aesthetic archwire coatings under a simulated intraoral environment

[1]  V. Rakhshan,et al.  Surface topography of plain nickel-titanium (NiTi), as-received aesthetic (coated) NiTi, and aesthetic NiTi archwires sterilized by autoclaving or glutaraldehyde immersion: A profilometry/SEM/AFM study. , 2019, International orthodontics.

[2]  A. Ulhaq,et al.  Alignment efficiency and esthetic performance of 4 coated nickel‐titanium archwires in orthodontic patients over 8 weeks: A multicenter randomized clinical trial , 2017, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[3]  J. Kovač,et al.  The effect of pH, fluoride and tribocorrosion on the surface properties of dental archwires. , 2017, Materials science & engineering. C, Materials for biological applications.

[4]  Nidhal H. Ghaib,et al.  The Effect of Artificial Saliva on the Surface Roughness of Different Esthetic Archwires : An in Vitro Study , 2017 .

[5]  C. T. Mattos,et al.  Characterization and coating stability evaluation of nickel-titanium orthodontic esthetic wires: an in vivo study. , 2017, Brazilian oral research.

[6]  K. Rhee,et al.  Influence of surface energetics of graphene oxide on fracture toughness of epoxy nanocomposites , 2017 .

[7]  Yan Li,et al.  Hydrothermal ageing mechanisms of unidirectional flax fabric reinforced epoxy composites , 2016 .

[8]  Samjin Choi,et al.  Surface ultrastructure and mechanical properties of three different white-coated NiTi archwires. , 2015, Scanning.

[9]  J. Gomes,et al.  Effects of diferent salivary ph on the surface and roughness of different orthodontic wires , 2015 .

[10]  S. Paduano,et al.  Effects of intraoral aging on surface properties of coated nickel-titanium archwires. , 2014, The Angle orthodontist.

[11]  T. Eliades,et al.  An investigation into the mechanical and aesthetic properties of new generation coated nickel-titanium wires in the as-received state and after clinical use. , 2014, European journal of orthodontics.

[12]  R. Simão,et al.  Coating stability and surface characteristics of esthetic orthodontic coated archwires. , 2013, The Angle orthodontist.

[13]  M. A. Neto,et al.  Effects of alkaline and acid solutions on glass/epoxy composites , 2013 .

[14]  N. Hosseini,et al.  Load-deflection and surface properties of coated and conventional superelastic orthodontic archwires in conventional and metal-insert ceramic brackets , 2012, Dental research journal.

[15]  H. Choe,et al.  Effect of coating on properties of esthetic orthodontic nickel-titanium wires. , 2012, The Angle orthodontist.

[16]  G. Perinetti,et al.  Surface corrosion and fracture resistance of two nickel-titanium-based archwires induced by fluoride, pH, and thermocycling. An in vitro comparative study. , 2012, European journal of orthodontics.

[17]  M. Ansell,et al.  Effect of nano- and micro-particle additions on moisture absorption in thixotropic room temperature cure epoxy-based adhesives for bonded-in timber connections , 2010 .

[18]  H. Kim,et al.  Corrosion of stainless steel, nickel-titanium, coated nickel-titanium, and titanium orthodontic wires. , 2010, The Angle orthodontist.

[19]  D. Bearn,et al.  Mechanical properties of coated superelastic archwires in conventional and self-ligating orthodontic brackets. , 2010, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[20]  R. Kusy.  Orthodontic biomaterials: from the past to the present. , 2009, The Angle orthodontist.

[21]  D. Pavlin,et al.  Type of archwire and level of acidity: effects on the release of metal ions from orthodontic appliances. , 2009, The Angle orthodontist.

[22]  D. Bearn,et al.  Ex vivo surface and mechanical properties of coated orthodontic archwires. , 2008, European journal of orthodontics.

[23]  Her-Hsiung Huang.  Surface characterizations and corrosion resistance of nickel-titanium orthodontic archwires in artificial saliva of various degrees of acidity. , 2005, Journal of biomedical materials research. Part A.

[24]  M. Nagumo,et al.  Hydrogen embrittlement of Ni-Ti superelastic alloy in fluoride solution. , 2003, Journal of biomedical materials research. Part A.

[25]  William D. Dupont,et al.  PS power and sample size program available for free on the internet , 1997 .

[26]  L. Giorgini,et al.  Acid Aging Effects on Surfaces of PTFE Gaskets Investigated by Fourier Transform Infrared Spectroscopy , 2016 .

[27]  D. Mareci,et al.  Comparative Electrochemical Behaviour of Uncoated and Coated NiTi for Dental Orthodontic Wires , 2015 .

[28]  C. Munteanu,et al.  Surface characteristics of retrieved coated and nickel-titanium orthodontic archwires. , 2012, Romanian journal of morphology and embryology = Revue roumaine de morphologie et embryologie.

[29]  M. Lampérth.  An investigation into the mechanical and electrical losses of permanent magnet disc machines , 2000 .

[30]  S. Toh,et al.  Bending stiffness of two aesthetic orthodontic archwires: an in vitro comparative study. , 1994, Clinical materials.