Electromechanical behavior of hybrid carbon/glass fiber composites with tension and bending

To understand the smart (i.e., good memory) characteristics of hybrid composites of carbon fibers (CFs) and glass fibers (GFs) with epoxy resin as a matrix, the changes in the electrical resistance of composites with tension and on bending were investigated. The electrical resistance behavior of composites under tension changed with the composition of the CF/GF, as well as with the applied strain. The fractional electrical resistance increased slowly with increasing strain within a relatively low strain region. However, with further loading it increased stepwise with the strain according to the fracture of the CF layers. The strain sensitivity of the samples increased with increasing CF weight percentage, and the samples incorporating more than 40 wt % CF showed a strain sensitivity higher than 1.54 for a single CF. The changes in the fractional electrical resistance with bending were not so dominant as those with tension. This difference was attributed to the action of two cancelling effects, which are the increasing and decreasing fractional electrical resistance due to tension and compression with bending, respectively. On recovery from a large applied bending, the fractional electrical resistance decreased slowly with unloading because of the increase of contacts between the fibers that resulted from the reorganization of ruptured CFs during the recovery. Even the composites incorporating a relatively small CF content showed an irreversible electrical resistance with both tension and bending. However, the strain sensitivity being larger with tension than with bending is ascribed to the difference in their mechanical behaviors. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2447–2453, 2002