Failure strain and stress fields of a chopped glass-reinforced polyester under biaxial loading

Abstract We perform experimental tests to obtain biaxial stress states in a chopped glass-reinforced polyester composite, applying in-plane perpendicular tensile loads to cruciform specimens. Three different specimens’ geometries have been considered for obtaining adequate failure modes with different loading cases. The scope is to estimate the strain and the stress failure states by measuring with gages the strains developed in the central zone, where a plane stress state with zero shear component occurs. We develop numerical simulations using the Finite Element Method in order to achieve a better understanding of the behaviour of the cruciform specimens under loading and to compare the numerical results with the experimental data. Maximum stress, Maximum strain, Tsai-Hill and Tsai-Wu biaxial failure theories are evaluated for the assumption of isotropic behaviour and contrasted with the experimental results.

[1]  Michael R.L. Gower,et al.  Towards a Planar Cruciform Specimen for Biaxial Characterisation of Polymer Matrix Composites , 2010 .

[2]  J. Boehler,et al.  Optimal design of biaxial tensile cruciform specimens , 1993 .

[3]  M. Hinton.  Failure Criteria in Fibre-Reinforced-Polymer Composites: The World-Wide Failure Exercise , 2004 .

[4]  M. Sarıkanat,et al.  Experimental Characterization of Traditional Composites Manufactured by Vacuum-Assisted Resin-Transfer Molding , 2008 .

[5]  Min Wan,et al.  Design of a cruciform biaxial tensile specimen for limit strain analysis by FEM , 2002 .

[6]  W. Van Paepegem,et al.  A Review of Biaxial Test Methods for Composites , 2007 .

[7]  D. Van Hemelrijck,et al.  Failure prediction for a glass/epoxy cruciform specimen under static biaxial loading , 2010 .

[8]  Adam C. Biskner,et al.  2-D biaxial testing and failure predictions of IM7/977-2 carbon/epoxy quasi-isotropic laminates , 2006 .

[9]  Wim Van Paepegem,et al.  Strain distribution in cruciform specimens subjected to biaxial loading conditions. Part 1: Two-dimensional versus three-dimensional finite element model , 2010 .

[10]  Mathias Brieu,et al.  Development of a biaxial tensile test fixture for reinforced thermoplastic composites , 2007 .

[11]  M. Moreno,et al.  Failure envelope under biaxial tensile loading for chopped glass-reinforced polyester composites , 2011 .

[12]  W. D. Callister,et al.  Fundamentals of Materials Science and Engineering , 2004 .

[13]  W. Van Paepegem,et al.  Shape optimisation of a biaxially loaded cruciform specimen , 2010 .

[14]  R. Hill.  The mathematical theory of plasticity , 1950 .

[15]  D. F. Adams,et al.  Development of an electromechanical triaxial test facility for composite materials , 2000 .

[16]  Wim Van Paepegem,et al.  Strain distribution in cruciform specimens subjected to biaxial loading conditions. Part 2: Influence of geometrical discontinuities , 2010 .

[17]  Donald F. Adams,et al.  An experimental investigation of the biaxial strength of IM6/3501-6 carbon/epoxy cross-ply laminates using cruciform specimens , 2002 .

[18]  Stephen W. Tsai,et al.  A General Theory of Strength for Anisotropic Materials , 1971 .

[19]  D. Van Hemelrijck,et al.  Design of a cruciform specimen for biaxial testing of fibre reinforced composite laminates , 2006 .