Relay Feedback Auto-tuning of Process Controllers – A Tutorial Review

The PID relay auto-tuner of Astrom–Hagglund is one of the simplest and most robust auto-tuning techniques for process controllers and has been successfully applied to industry for more than 15 years. This tuner is based on an approximate estimation of the critical point on the process frequency response from relay oscillations. Many developments have recently been reported to extend its applications. It turns out that more and accurate information on process dynamics can be obtained from the same relay test with the help of new identification techniques, and used to tune PID controllers better. Extensions are also made to tune model-based advanced controllers and multivariable controllers. The present paper reviews these developments and shows the state-of art in relay auto-tuning of process controllers.

[1]  G. D. Bergland,et al.  A guided tour of the fast Fourier transform , 1969, IEEE Spectrum.

[2]  Karl Johan Åström,et al.  Simple Self-Tuning Controllers , 1980 .

[3]  Shih‐Haur Shen,et al.  Use of relay‐feedback test for automatic tuning of multivariable systems , 1994 .

[4]  Chang Chieh Hang,et al.  Reduced order process modelling in self-tuning control , 1991, Autom..

[5]  I︠a︡. Z. T︠S︡ypkin.  Relay Control Systems , 1985 .

[6]  William L. Luyben,et al.  Simple method for tuning SISO controllers in multivariable systems , 1986 .

[7]  Cheng-Liang Chen,et al.  Autotuning for model-based PID controllers , 1996 .

[8]  Chang Chieh Hang,et al.  Relay auto-tuning in the presence of static load disturbance , 1993, Autom..

[9]  Norman Morrison,et al.  Introduction to Fourier Analysis , 1994, An Invitation to Modern Number Theory.

[10]  Alberto Leva,et al.  PID autotuning algorithm based on relay feedback , 1993 .

[11]  Jin Hyun Park,et al.  Improved relay auto-tuning with static load disturbance , 1997, Autom..

[12]  In-Beum Lee,et al.  An Enhanced Process Identification Method for Automatic Tuning of PID Controller , 1999 .

[13]  Karl Johan Åström,et al.  Adaptive Control , 1989, Embedded Digital Control with Microcontrollers.

[14]  Tore Hägglund,et al.  Automatic Tuning of Pid Controllers , 1988 .

[15]  Qiang Bi,et al.  A Frequency Domain Controller Design Method , 1997 .

[16]  C.C. Hang,et al.  A comparative performance study of PID auto-tuners , 1991, IEEE Control Systems.

[17]  Tore Hägglund,et al.  Automatic Tuning and Adaptation for PID Controllers—A Survey , 1992 .

[18]  Moonyong Lee,et al.  Robust PID tuning for Smith predictor in the presence of model uncertainty , 1999 .

[19]  K. K. Tan,et al.  Knowledge-based process identification from relay feedback , 1995 .

[20]  Kok Kiong Tan,et al.  Relay-tuned finite spectrum assignment control of time delay processes , 1998 .

[21]  Karl Johan Åström,et al.  PID Controllers: Theory, Design, and Tuning , 1995 .

[22]  Katsuhiko Ogata,et al.  Modern Control Engineering , 1970 .

[23]  Tor Steinar Schei,et al.  A method for closed loop automatic tuning of PID controllers , 1992, Autom..

[24]  C. Hang,et al.  Refinements of the Ziegler-Nichols tuning formula , 1991 .

[25]  Sunwon Park,et al.  PID controller tuning to obtain desired closed loop responses for cascade control systems , 1998 .

[26]  Robert W. Ramirez,et al.  The Fft, Fundamentals and Concepts , 1984 .

[27]  L. Wang,et al.  A Frequency Domain Design Method for PID Controllers , 1993, 1993 American Control Conference.

[28]  Kok Kiong Tan,et al.  A modified relay-based technique for improved critical point estimation in process control , 1995, IEEE Trans. Control. Syst. Technol..

[29]  Cheng-Ching Yu,et al.  Derivation of transfer function from relay feedback systems , 1992 .

[30]  Tore Hägglund,et al.  Automatic tuning of simple regulators with specifications on phase and amplitude margins , 1984, Autom..

[31]  R. W. Bass.  Mathematical legitimacy of equivalent linearization by describing functions , 1960 .

[32]  Karl Johan Åström,et al.  Practical Aspects of PID Auto-Tuners Based on Relay Feedback , 1988 .

[33]  Ai Poh Loh,et al.  Relay feedback auto-tuning of cascade controllers , 1994, IEEE Trans. Control. Syst. Technol..

[34]  Cheng-Ching Yu,et al.  Use of saturation-relay feedback for autotune identification , 1996 .

[35]  Cheng-Ching Yu,et al.  Autotune identification under load disturbance , 1996 .

[36]  Chang-Chieh Hang,et al.  Self‐tuning Smith predictors for processes with long dead time , 1995 .

[37]  Kok Kiong Tan,et al.  Finite Spectrum Assignment Control of Unstable Time Delay Processes with Relay Tuning , 1998 .

[38]  In-Beum Lee,et al.  Limitations and Countermeasures of PID Controllers , 1996 .

[39]  Karl-Erik Årzén,et al.  Expert control , 1986, at - Automatisierungstechnik.

[40]  Tore Hägglund,et al.  Industrial adaptive controllers based on frequency response techniques , 1991, Autom..

[41]  Yu Zhang,et al.  Multiloop Version of the Modified Ziegler−Nichols Method for Two Input Two Output Processes , 1998 .

[42]  D. P. Atherton,et al.  Nonlinear Control Engineering-Describing Function Analysis and Design , 1977, IEEE Transactions on Systems, Man, and Cybernetics.

[43]  Weng Khuen Ho,et al.  Tuning of PID controllers based on gain and phase margin specifications , 1995, Autom..

[44]  Qiang Bi,et al.  Process frequency response estimation from relay feedback , 1997 .

[45]  Kok Kiong Tan,et al.  Enhanced automatic tuning procedure for process control of PI/PID controllers , 1996 .

[46]  H. Unbehauen,et al.  Methods and Applications in Adaptive Control , 1980 .

[47]  Su Whan Sung,et al.  New Process Identification Method for Automatic Design of PID Controllers , 1998, Autom..

[48]  Mats Friman,et al.  Autotuning of Multiloop Control Systems , 1994 .

[49]  Mats Friman,et al.  A two-channel relay for autotuning , 1997 .

[50]  In-Beum Lee,et al.  Modified relay feedback method , 1995 .

[51]  Chang Chieh Hang,et al.  Towards intelligent PID control , 1989, Autom..

[52]  Kok Kiong Tan,et al.  Automatic tuning of finite spectrum assignment controllers for delay systems , 1995, Autom..

[53]  Qing-Guo Wang,et al.  Low-Order Modeling from Relay Feedback , 1997 .

[54]  Edgar H. Bristol,et al.  Pattern recognition: An alternative to parameter identification in adaptive control , 1977, Autom..

[55]  K.J. ÅSTRÖM,et al.  Design of PI Controllers based on Non-Convex Optimization , 1998, Autom..

[56]  Chang-Chieh Hang,et al.  Autotuning of multiloop proportional-integral controllers using relay feedback , 1993 .

[57]  T. T. Tay,et al.  AUTO-TUNING OF MULTIVARIABLE DECOUPLING CONTROLLERS , 1991 .

[58]  William L. Luyben,et al.  Derivation of transfer functions for highly nonlinear distillation columns , 1987 .

[59]  Barbara Hayes-Roth,et al.  Intelligent Control , 1994, Artif. Intell..

[60]  Young Han Kim.  PI Controller Tuning Using Modified Relay Feedback Method , 1995 .

[61]  Dale E. Seborg,et al.  A new method for on‐line controller tuning , 1982 .

[62]  Gene F. Franklin,et al.  Feedback Control of Dynamic Systems , 1986 .

[63]  Zalman J. Palmor,et al.  An auto-tuner for Smith dead time compensator , 1994 .

[64]  Chang-Chieh Hang,et al.  A frequency response approach to autotuning of multivariable controllers , 1997 .

[65]  Su Whan Sung,et al.  Automatic Tuning of PID Controller Using Second-Order Plus Time Delay Model , 1996 .

[66]  J. G. Ziegler,et al.  Optimum Settings for Automatic Controllers , 1942, Journal of Fluids Engineering.

[67]  Sunwon Park,et al.  PID controller tuning for desired closed‐loop responses for SI/SO systems , 1998 .

[68]  Zalman J. Palmor,et al.  Automatic Tuning of Decentralized PID Controllers for TITO Processes , 1993 .

[69]  Tore Hägglund,et al.  Automatic Tuning of Simple Regulators , 1984 .