Oriented review to potential simulator for faults modeling in diesel engine

Abstract This paper presents a literature review on most of the faults and their models that are considered on a diesel engine. Several faults that may be produced on diesel engine have been analyzed, classified, modeled, and their influences on the global system have been shown. Thus, this paper aims to prepare an important data base on diesel engine faults which may help researchers to develop precise strategies on diesel engine fault diagnosis and prognosis, and also it helps in the development of diesel engine simulators aiming to study the behavior of the diesel engine in the presence of faults. Different fault models such as analytical, empirical, degradation models which may be represented as function of time or as function of the number of cycles, data driven models such as neural network models, or simply constant are presented and analyzed. The global overall models for diesel engine integrating faults are expressed. And finally, the use of these models with the most common failure density distribution functions is proposed giving a more realistic approach to our study.

[1]  Javad Aminian,et al.  Evaluation of ANN modeling for prediction of crude oil fouling behavior , 2008 .

[2]  S. Chun.  A Study on Oil Consumption Related with the Piston Ring Pack with Thinner Ring Width and Lower Ring Tension , 2009 .

[3]  Q. Zhang,et al.  A HYBRID APPROACH TO HYDRAULIC VANE PUMP CONDITION MONITORING AND FAULT DETECTION , 2006 .

[4]  Carlos Canudas-de-Wit,et al.  Model-based adaptive observers for intake leakage detection in diesel engines , 2009, 2009 American Control Conference.

[5]  George Vachtsevanos,et al.  Fault prognosis using dynamic wavelet neural networks , 2001, 2001 IEEE Autotestcon Proceedings. IEEE Systems Readiness Technology Conference. (Cat. No.01CH37237).

[6]  Angui Li,et al.  CFD simulation of particle deposition in a horizontal turbulent duct flow , 2008 .

[7]  Thomas M. Walski,et al.  Economic analysis of water main breaks , 1982 .

[8]  P. Walker,et al.  Assessment of the effect of velocity and residence time in CaSO4 precipitating flow reaction , 2003 .

[9]  Nagi Gebraeel,et al.  Degradation modeling applied to residual lifetime prediction using functional data analysis , 2011, 1107.5712.

[10]  C. James Li,et al.  Gear fatigue crack prognosis using embedded model, gear dynamic model and fracture mechanics , 2005 .

[11]  Magnus Moglia,et al.  Strong exploration of a cast iron pipe failure model , 2008, Reliab. Eng. Syst. Saf..

[12]  David He,et al.  A State Space Model for Vibration Based Prognostics , 2010 .

[13]  Magnus Moglia,et al.  A physical probabilistic model to predict failure rates in buried PVC pipelines , 2007, Reliab. Eng. Syst. Saf..

[14]  Joseph Mathew,et al.  Bearing fault prognosis based on health state probability estimation , 2012, Expert Syst. Appl..

[15]  Sang Myung Chun,et al.  Simulation of engine life time related with abnormal oil consumption , 2011 .

[16]  J. Hinrichs,et al.  On the usage of acoustic properties combined with an artificial neural network – A new approach of determining presence of dairy fouling , 2011 .

[17]  Glen W Howell,et al.  Aerospace Fluid Component Designers' Handbook. Volume II, Revision D. , 1970 .

[18]  Zhigang Tian,et al.  An artificial neural network method for remaining useful life prediction of equipment subject to condition monitoring , 2012, J. Intell. Manuf..

[19]  Sang-Myung Chun,et al.  A Study on Engine Oil Consumption , 2005 .

[20]  S. Hattori,et al.  Prediction of cavitation erosion on stainless steel components in centrifugal pumps , 2008 .

[21]  S. Shahhosseini,et al.  Neuro-based formulation to predict fouling threshold in crude preheaters , 2009 .

[22]  Joseph Mathew,et al.  Rotating machinery prognostics. State of the art, challenges and opportunities , 2009 .

[23]  F.O. Heimes,et al.  Recurrent neural networks for remaining useful life estimation , 2008, 2008 International Conference on Prognostics and Health Management.

[24]  Dimitris Kiritsis,et al.  A predictive algorithm for estimating the quality of vehicle engine oil , 2008 .

[25]  L. Pettit,et al.  Bayesian analysis for inverse gaussian lifetime data with measures of degradation , 1999 .

[26]  Pierluigi Pisu,et al.  Model-based fault detection and isolation for a diesel lean NOx trap aftertreatment system , 2010 .

[27]  Dimitrios T. Hountalas,et al.  Development of a Thermodynamic Method for Diagnosis and Tuning of Diesel Engines And its Application on Marine Engines , 1995 .

[28]  Naresh K. Raghuwanshi,et al.  Failure Analysis of Internal Combustion EngineValves: A Review , 2012 .

[29]  William Q. Meeker,et al.  Using Accelerated Tests to Predict Service Life in Highly-Variable Environments , 2000 .

[30]  Andrew W. Batchelor,et al.  2 – Physical Properties of Lubricants , 2006 .

[31]  S. Tung,et al.  Modeling of Abrasive Wear in a Piston Ring and Engine Cylinder Bore System© , 2004 .

[32]  Ahmet Kahraman,et al.  Prediction of surface wear of hypoid gears using a semi-analytical contact model , 2012 .

[33]  Uri Shamir,et al.  An Analytic Approach to Scheduling Pipe Replacement , 1979 .

[34]  Pascal Chesse,et al.  Real-time performance simulation of marine Diesel engines for the training of navy crews , 2004 .

[35]  Lingfang Sun,et al.  Research on the fouling prediction of heat exchanger based on Relevance vector machine , 2010, 2010 8th World Congress on Intelligent Control and Automation.

[36]  C. Joseph Lu,et al.  Using Degradation Measures to Estimate a Time-to-Failure Distribution , 1993 .

[37]  Shaosheng Fan,et al.  Prediction of Fouling in Condenser Based on Fuzzy Stage Identification and Chebyshev Neural Network , 2013 .

[38]  Qi An,et al.  Load Calculation and Life Prediction for Auto Water Pump Bearing , 2012 .

[39]  Chun Sang-Myung,et al.  A Study on Cylinder Bore Wear during Engine Durability Test , 2006 .

[40]  Matthew J. Watson,et al.  In-line health monitoring system for hydraulic pumps and motors , 2003, 2003 IEEE Aerospace Conference Proceedings (Cat. No.03TH8652).

[41]  Huairui Guo,et al.  Modeling and analysis for degradation with an initiation time , 2013, 2013 Proceedings Annual Reliability and Maintainability Symposium (RAMS).

[42]  J. Mayer,et al.  Piston Ring Lubrication and Cylinder Bore Wear Analysis, Part I—Theory , 1974 .

[43]  Balvant Rajani,et al.  Comprehensive review of structural deterioration of water mains: physically based models , 2001 .

[44]  R. K. Mehra,et al.  Stable adaptive multiple model-based control design for accommodation of sensor failures , 2002, Proceedings of the 2002 American Control Conference (IEEE Cat. No.CH37301).

[45]  L. Peel,et al.  Data driven prognostics using a Kalman filter ensemble of neural network models , 2008, 2008 International Conference on Prognostics and Health Management.

[46]  K. Gillen,et al.  The wear-out approach for predicting the remaining lifetime of materials , 2000 .

[47]  W. M. Needelman,et al.  Review of Lubricant Contamination and Diesel Engine Wear , 1988 .

[48]  Dimitrios T. Hountalas,et al.  Development and application of a fully automatic troubleshooting method for large marine diesel engines , 1999 .

[49]  Steven Y. Liang,et al.  Adaptive Prognostics for Rolling Element Bearing Condition , 1999 .

[50]  H. Rasmussen,et al.  Model based fault diagnosis in a centrifugal pump application using structural analysis , 2004, Proceedings of the 2004 IEEE International Conference on Control Applications, 2004..

[51]  Qiang Xu,et al.  Application of genetic programming to modeling pipe failures in water distribution systems , 2011 .

[52]  G Rizzoni,et al.  Nonlinear parity equation based residual generation for diagnosis of automotive engine faults , 1995 .

[53]  Lei Gu,et al.  Engine lubricant warning system based on the dielectric constant , 2009, 2009 9th International Conference on Electronic Measurement & Instruments.

[54]  K. Doksum,et al.  Models for variable-stress accelerated life testing experiments based on Wiener processes and the inverse Gaussian distribution , 1992 .

[55]  Yong He,et al.  Diesel fuel injection system faults diagnosis based on fuzzy injection pressure pattern recognition , 2004, Fifth World Congress on Intelligent Control and Automation (IEEE Cat. No.04EX788).

[56]  John H. Johnson,et al.  A Model and the Methodology for Determining Wear Particle Generation Rate and Filter Efficiency in a Diesel Engine Using Ferrography , 1982 .

[57]  Zhigang Tian,et al.  An artificial neural network approach for remaining useful life prediction of equipments subject to condition monitoring , 2009, 2009 8th International Conference on Reliability, Maintainability and Safety.

[58]  Ron J. Patton,et al.  An application of eigenstructure assignment to robust residual design for FDI , 1996 .

[59]  K. B. Goh,et al.  Fault diagnostics using sliding mode techniques , 2002 .

[60]  J. Holtrop,et al.  A STATISTICAL POWER PREDICTION METHOD , 1978 .

[61]  W. J. Padgett,et al.  Inference from Accelerated Degradation and Failure Data Based on Gaussian Process Models , 2004, Lifetime data analysis.

[62]  A. Wolfram,et al.  Component-based multi-model approach for fault detection and diagnosis of a centrifugal pump , 2001, Proceedings of the 2001 American Control Conference. (Cat. No.01CH37148).

[63]  P. A. Lakshminarayanan,et al.  Predictions of cam follower wear in diesel engines , 2006 .

[64]  F. Brahim,et al.  Numerical simulation of the fouling process , 2003 .

[65]  B. J. Roylance,et al.  Plant machinery working life prediction method utilizing reliability and condition-monitoring data , 2000 .

[66]  Jay Lee,et al.  Prognostics and health management design for rotary machinery systems—Reviews, methodology and applications , 2014 .

[67]  Hassan Noura,et al.  A linear approach with μ-analysis control adaptation for a complete-model diesel-engine diagnosis , 2009, 2009 Chinese Control and Decision Conference.

[68]  Khashayar Khorasani,et al.  Fault Diagnosis of Nonlinear Systems Using a Hybrid Approach , 2009 .

[69]  Chun Sang-Myung,et al.  A Study on Ring Face and Groove Wear during Engine Durability Test , 2006 .

[70]  D. Sales,et al.  Model for fouling deposition on power plant steam condensers cooled with seawater: Effect of water velocity and tube material , 2007 .

[71]  Seth D. Guikema,et al.  Statistical models for the analysis of water distribution system pipe break data , 2009, Reliab. Eng. Syst. Saf..

[72]  F. J. Salvador,et al.  STUDY OF THE INFLUENCE OF THE NEEDLE LIFT ON THE INTERNAL FLOW AND CAVITATION PHENOMENON IN DIESEL INJECTOR NOZZLES BY CFD USING RANS METHODS , 2013 .

[73]  Rolf Isermann,et al.  Fault detection for modern Diesel engines using signal- and process model-based methods , 2005 .

[74]  Guillaume Ducard,et al.  Fault-tolerant Flight Control and Guidance Systems: Practical Methods for Small Unmanned Aerial Vehicles , 2009 .

[75]  Angui Li,et al.  Modeling deposition of particles in typical horizontal ventilation duct flows , 2008 .

[76]  M. Farid Golnaraghi,et al.  Prognosis of machine health condition using neuro-fuzzy systems , 2004 .

[77]  Rolf Isermann,et al.  Supervision, fault-detection and fault-diagnosis methods — An introduction , 1997 .

[78]  A.A. Ferri,et al.  An Intelligent Diagnostic/Prognostic Framework for Automotive Electrical Systems , 2007, 2007 IEEE Intelligent Vehicles Symposium.

[79]  Ana Debón,et al.  Comparing risk of failure models in water supply networks using ROC curves , 2010, Reliab. Eng. Syst. Saf..

[80]  Steven M. Cox,et al.  Stochastic models for degradation-based reliability , 2005 .

[81]  Guanghua Xu,et al.  A mixture Weibull proportional hazard model for mechanical system failure prediction utilising lifetime and monitoring data , 2014 .

[82]  Dimitris Kiritsis,et al.  Predictive algorithm to determine the suitable time to change automotive engine oil , 2006, Comput. Ind. Eng..

[83]  David P. Hoult,et al.  The puddle theory of oil consumption , 1994 .

[84]  Sang-Myung Chun,et al.  A Study on Friction Reduction Related with the Piston Ring Pack with Thinner Width Ring and Lower Tension Ring , 2009 .

[85]  S. Krüger,et al.  Assessment Of Wear Erosion In Pump Impellers , 2010 .

[86]  Mustapha Ouladsine,et al.  Complete modeling for systems of a marine diesel engine , 2015 .

[87]  K. Jing,et al.  Time Prediction Model for Pipeline Leakage Based on Grey Relational Analysis , 2012 .

[88]  Chanseok Park,et al.  Stochastic degradation models with several accelerating variables , 2006, IEEE Transactions on Reliability.

[89]  Nagi Gebraeel,et al.  Sensory-Updated Residual Life Distributions for Components With Exponential Degradation Patterns , 2006, IEEE Transactions on Automation Science and Engineering.

[90]  J.B. Zhang,et al.  Model-based fault diagnosis/prognosis for wheeled mobile robots: a review , 2005, 31st Annual Conference of IEEE Industrial Electronics Society, 2005. IECON 2005..

[91]  Anastassios N. Perakis,et al.  Reliability Analysis of Great Lakes Marine Diesels: State of the Art and Current Modeling , 1990 .

[92]  E.R. Brown,et al.  Prognostics and Health Management A Data-Driven Approach to Supporting the F-35 Lightning II , 2007, 2007 IEEE Aerospace Conference.

[93]  Ratna Babu Chinnam,et al.  Online Reliability Estimation of Physical Systems Using Neural Networks and Wavelets , 2002 .

[94]  Lifeng Xi,et al.  Residual life predictions for ball bearings based on self-organizing map and back propagation neural network methods , 2007 .

[95]  R. A. Collacott,et al.  Mechanical fault diagnosis and condition monitoring , 1977 .

[96]  Nicholas P. Kyrtatos,et al.  A Microcomputer Based Diesel Engine Simulator for Advanced Ship Propulsion Monitoring and Control Systems , 1989 .

[97]  Reza Tafreshi,et al.  Informative wavelet algorithm in diesel engine diagnosis , 2002, Proceedings of the IEEE Internatinal Symposium on Intelligent Control.

[98]  Evangelos G. Giakoumis,et al.  Prediction of friction development during transient diesel engine operation using a detailed model , 2007 .

[99]  W. Gregory Sawyer,et al.  Wear predictions for a simple-cam including the coupled evolution of wear and load , 2001 .

[100]  Frédéric Kratz,et al.  Structured hypothesis tests based diagnosis : application to a common rail diesel injection system , 2004 .

[101]  Steven Y. Liang,et al.  STOCHASTIC PROGNOSTICS FOR ROLLING ELEMENT BEARINGS , 2000 .

[102]  Marappagounder Ramasamy,et al.  Heat exchanger fouling model and preventive maintenance scheduling tool , 2007 .

[103]  C. Byington,et al.  DYNAMIC MODELING AND WEAR-BASED REMAINING USEFUL LIFE PREDICTION OF HIGH POWER CLUTCH SYSTEMS , 2005 .

[104]  H. Saunders,et al.  Probabilistic models of cumulative damage , 1985 .

[105]  P.J. Unsworth,et al.  Fuzzy logic system to detect pump faults from motor current spectra , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[106]  Daniele B. Laucelli,et al.  Asset deterioration analysis using multi-utility data and multi-objective data mining , 2009 .

[107]  G. Biswas,et al.  PHM Integration with Maintenance and Inventory Management Systems , 2006, 2007 IEEE Aerospace Conference.

[108]  Sveinung Sægrov,et al.  Statistical approach for describing failures and lifetimes of water mains , 1998 .

[109]  M.J. Roemer,et al.  Prognostic enhancements to diagnostic systems for improved condition-based maintenance [military aircraft] , 2002, Proceedings, IEEE Aerospace Conference.

[110]  B. Jakoby,et al.  An automotive engine oil viscosity sensor , 2003 .

[111]  Yuhua Li,et al.  A review of condition monitoring and fault diagnosis for diesel engines , 2000 .

[112]  Rong Li,et al.  Residual-life distributions from component degradation signals: A Bayesian approach , 2005 .

[113]  Mattias Nyberg,et al.  Model based diagnosis of the air path of an automotive diesel engine , 2001 .

[114]  Colin Christian,et al.  Bayesian-based pipe failure model , 2004 .

[115]  Sarangapani Jagannathan,et al.  Remaining useful life prediction of automotive engine oils using MEMS technologies , 2000, Proceedings of the 2000 American Control Conference. ACC (IEEE Cat. No.00CH36334).

[116]  M. Khonsari,et al.  An engineering approach for the prediction of wear in mixed lubricated contacts , 2013 .

[117]  Luigi Berardi,et al.  Development of pipe deterioration models for water distribution systems using EPR , 2008 .

[118]  Li Wei-feng,et al.  Rule-based Model for Aging-induced Leakage from Water Supply Pipe Network in Beijing City , 2008 .

[119]  Benoît Iung,et al.  Remaining useful life estimation based on stochastic deterioration models: A comparative study , 2013, Reliab. Eng. Syst. Saf..

[120]  Luigi Berardi,et al.  Modelling sewer failure by evolutionary computing , 2006 .

[121]  Inmaculada Arauzo,et al.  Monitoring and prediction of fouling in coal-fired utility boilers using neural networks , 2005 .

[122]  Anwar Khalil Sheikh,et al.  A Maintenance Strategy for Heat Transfer Equipment Subject to Fouling: A Probabilistic Approach , 1997 .

[123]  Erik Frisk,et al.  Improving Diagnosis Performances on a Truck Engine Making use of Statistical Charts , 2004 .

[124]  Guang-Fu Ma,et al.  Fault diagnosis of diesel engine combustion system based on neural networks , 2004, Proceedings of 2004 International Conference on Machine Learning and Cybernetics (IEEE Cat. No.04EX826).

[125]  D.M. Dawson,et al.  A Smart Multiple-Loop Automotive Cooling System—Model, Control, and Experimental Study , 2010, IEEE/ASME Transactions on Mechatronics.

[126]  J. M. Hammond,et al.  An acoustic automotive engine oil quality sensor , 1997, Proceedings of International Frequency Control Symposium.

[127]  D. Dowson,et al.  Predictive wear modelling of lubricated piston rings in a diesel engine , 1999 .

[128]  W. Scott,et al.  Wear in external gear pumps: A simplified model , 1994 .

[129]  S. M. Peyghambarzadeh,et al.  Application of asymptotic model for the prediction of fouling rate of calcium sulfate under subcooled flow boiling , 2012 .

[130]  D. A. Kouremenos,et al.  Diagnosis and condition monitoring of medium‐speed marine diesel engines , 1997 .

[131]  Dimitrios T. Hountalas,et al.  Prediction of marine diesel engine performance under fault conditions , 2000 .

[132]  Lai-bin Zhang,et al.  Short-term fault prediction of mechanical rotating parts on the basis of fuzzy-grey optimising method , 2007 .

[133]  Wang Yi-ling,et al.  Wear prediction for unlubricated piston rings , 1990 .

[134]  Maurizio Guida,et al.  A competing risk model for the reliability of cylinder liners in marine Diesel engines , 2009, Reliab. Eng. Syst. Saf..

[135]  B Inozu,et al.  Statistical analysis of failure time distributions for Great Lakes marine diesels using censored data , 1991 .

[136]  I. C. Goulter,et al.  An analysis of pipe breakage in urban water distribution networks , 1985 .

[137]  Sang-Myung Chun,et al.  A Basic Study on Piston-Ring Pack , 2005 .

[138]  O. Armas,et al.  Diagnosis of DI Diesel combustion from in-cylinder pressure signal by estimation of mean thermodynamic properties of the gas , 1999 .

[139]  Rehan Sadiq,et al.  Probabilistic risk analysis of corrosion associated failures in cast iron water mains , 2004, Reliab. Eng. Syst. Saf..