The effect of grain boundary serration on creep resistance in a wrought nickel-based superalloy

Abstract Grain boundary serration, as a function of heat treatment parameters, and its effect on creep resistance have been investigated in a wrought nickel-based superalloy Nimonic 263. Grain boundary serration occurs in the absence of adjacent γ′ particles or M23C6 when a specimen is slow-cooled from solution treatment temperature. The average amplitude and wavelength of serrations can be controlled without a significant change in grain size and γ′ size by adjusting the heat treatment parameters of solution treatment time and cooling rate. Grain boundary serration leads to changes in M23C6 carbide characteristics: from granular to planar morphology, a lowered density, and the coherency pattern to two neighboring grains from consistent to zigzag. Creep resistance improvement due to serration is associated with a lower rate of cavitation and crack propagation through the modification of carbide characteristics, as well as grain boundary configuration.

[1]  S. Nam,et al.  Crystallographic Investigations on the Serrated Grain Boundaries in an AISI 316 Stainless Steel , 2001 .

[2]  S. Nam,et al.  Improvement of creep-fatigue life by the modification of carbide characteristics through grain boundary serration in an AISI 304 stainless steel , 2003 .

[3]  D. Yoon,et al.  The dendritic growth of γ′ precipitates and grain , 1993, Metallurgical and Materials Transactions A.

[4]  Y. Yoon,et al.  The normalized coffin- manson plot in terms of a new damage function based on grain boundary cavitation under creep- fatigue condition , 1996 .

[5]  Chang-Soo Kim,et al.  Changes in the five-parameter grain boundary character distribution in α-brass brought about by iterative thermomechanical processing , 2006 .

[6]  J. M. Larson,et al.  Metallurgical factors affecting the crack growth resistance of a superalloy , 1977 .

[7]  M. Yamazaki.  The Effect of Two-Step Solution Treatment on the Creep Rupture Properties of a High Carbon 18Cr-12Ni Stainless Steel , 1966 .

[8]  D. Taplin,et al.  The role of precipitation parameters upon the creep rupture properties of inconel alloy X-750 , 1973 .

[9]  S. Nam,et al.  THE OCCURRENCE OF GRAIN BOUNDARY SERRATION AND ITS EFFECT ON THE M23C6 CARBIDE CHARACTERISTICS IN AN AISI 316 STAINLESS STEEL , 2002 .

[10]  D. Gan,et al.  Effects of grain boundary carbides on the mechanical properties of Inconel 600 , 2001 .

[11]  R. Thamburaj,et al.  Serrated grain boundary formation potential of Ni-based superalloys and its implications , 1985 .

[12]  V. Ravikumar,et al.  Phase precipitation and phase stability in nimonic 263 , 2001 .

[13]  V. Randlè.  `Special¿ boundaries and grain boundary plane engineering , 2006 .

[14]  H. Iizuka,et al.  Creep rupture strength and grain-boundary sliding in austenitic 21 Cr-4Ni-9Mn steels with serrated grain boundaries , 1988 .

[15]  A. K. Koul,et al.  On the mechanism of serrated grain boundary formation in Ni-based superalloys , 1983 .

[16]  S. Nam,et al.  Correlation of the M23C6 precipitation morphology with grain boundary characteristics in austenitic stainless steel , 2001 .