Design and Analysis of Flexible Arms for Minimum-Phase Endpoint Control

A new transmission mechanism for one-link flexible arms is presented. The endpoint control of a flexible arm has been known to be a non-minimum phase system due to the non-collocated sensor and actuator. The mechanism developed in this paper allows the endpoint control system to be a minimum phase system by having a special transmission line from its actuator to an appropriate point where the actuator torque is applied. The new flexible arm is analyzed in terms of pole-zero locations and design guidelines for the transmissions are derived. A simple prototype arm is designed, built and tested. It is compared with a non-minimum phase arm, and the minimum phase feature of the new arm is verified through experiments.

[1]  Jahng-Hyon Park,et al.  Design and control of minimum-phase flexible arms with torque transmission mechanisms , 1990, Proceedings., IEEE International Conference on Robotics and Automation.

[2]  H. Asada,et al.  Inverse Dynamics of Flexible Robots; Modeling and Recursive Computation Using Virtual Rigid Link Coordinate Systems , 1989, 1989 American Control Conference.

[3]  R. H. Cannon,et al.  Initial Experiments on the End-Point Control of a Flexible One-Link Robot , 1984 .

[4]  Warren P. Seering,et al.  Modeling robot flexibility for endpoint force control , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.