Biomechanical evaluation of reconstruction plates with locking, nonlocking, and hybrid screws configurations in calcaneal fracture: a finite element model study

Calcaneal fractures are the most common fractures of the tarsal bones. The stability of fixation is an important factor for successful reconstruction of calcaneal fractures. The purpose of this study was to analyze the biomechanical influence of plate fixation with different combinations of locking and nonlocking screws during early weight-bearing phase. A three-dimensional FE foot model was established using ANSYS software, which comprised bones, cartilages, plantar fascia, and soft tissue. Calcaneal plate was fixed with whole locking (WLS), whole nonlocking (WNS), and hybrid screw configurations for FE analysis. The WNS generated a 6.1° and 2.2° Bohler angle decrease compared with the intact model and WLS (WNS: 18.9; WLS: 21.1; intact: 25.0°). Some hybrid screw configurations (Bohler angle: 21.5° and 21.2°) generated stability similar to WLS. The FE results showed that the fragments at the posterior facet and the posterior tuberosity sustained more stress. This study recommends that the hybrid screw configuration with at least four locking screws, two at the posterior facet fragment and two at the posterior tuberosity fragment, is the optimal choice for the fixation of Sanders type IIB calcaneal fractures.

[1]  C. Provatidis,et al.  Effects of foot posture on fifth metatarsal fracture healing: a finite element study. , 2012, The Journal of foot and ankle surgery : official publication of the American College of Foot and Ankle Surgeons.

[2]  Shih-Liang Shih,et al.  Biomechanical analysis of foot with different foot arch heights: a finite element analysis , 2012, Computer methods in biomechanics and biomedical engineering.

[3]  Christopher F. Hyer,et al.  Early Weight Bearing of Calcaneal Fractures Fixated With Locked Plates , 2010, Foot & ankle specialist.

[4]  C. Saltzman,et al.  Surgery of the Foot and Ankle , 1993 .

[5]  R M Harrington,et al.  Factors affecting the pullout strength of cancellous bone screws. , 1996, Journal of biomechanical engineering.

[6]  M. Richter,et al.  A Comparison of Plates With and Without Locking Screws in a Calcaneal Fracture Model , 2005, Foot & ankle international.

[7]  Razvan Rusovici,et al.  A finite element parametric study of clavicle fixation plates , 2015, International journal for numerical methods in biomedical engineering.

[8]  D. Wright,et al.  A STUDY OF THE ELASTIC PROPERTIES OF PLANTAR FASCIA. , 1964, The Journal of bone and joint surgery. American volume.

[9]  D. Griffin,et al.  Finite-Element Analysis , 1975 .

[10]  H. Zwipp,et al.  Stability of Locking and Non-Locking Plates in an Osteoporotic Calcaneal Fracture Model , 2011, Foot & ankle international.

[11]  B. Sangeorzan,et al.  Contact Characteristics of the Subtalar Joint After a Simulated Calcaneus Fracture , 1995, Journal of orthopaedic trauma.

[12]  R D Crowninshield,et al.  An analysis of soft tissue loading in the foot--a preliminary report. , 1981, Bulletin of prosthetics research.

[13]  S. Siegler,et al.  The Mechanical Characteristics of the Collateral Ligaments of the Human Ankle Joint* , 1988, Foot & ankle.

[14]  M. Kuster,et al.  A comparison of conventional versus locking plates in intraarticular calcaneus fractures: a biomechanical study in human cadavers. , 2007, Clinical biomechanics.

[15]  Hongwei Hsiao,et al.  Accuracy and precision of two in-shoe pressure measurement systems , 2002, Ergonomics.

[16]  R. Adelaar,et al.  Biomechanical Evaluation of a Locking and Nonlocking Reconstruction Plate in an Osteoporotic Calcaneal Fracture Model , 2011, Foot & ankle international.

[17]  A. Farron,et al.  Tightening force and torque of nonlocking screws in a reverse shoulder prosthesis. , 2010, Clinical biomechanics.

[18]  A. Schulz,et al.  Early Weight Bearing of Calcaneal Fractures Treated by Intraoperative 3D-Fluoroscopy and Locked-Screw Plate Fixation , 2009, The open orthopaedics journal.

[19]  J. Lee,et al.  Effects of internal stress concentrations in plantar soft-tissue--A preliminary three-dimensional finite element analysis. , 2010, Medical engineering & physics.

[20]  Shih-Liang Shih,et al.  Using an Optimization Approach to Design an Insole for Lowering Plantar Fascia Stress—A Finite Element Study , 2008, Annals of Biomedical Engineering.

[21]  Ming Zhang,et al.  Biomechanical study of tarsometatarsal joint fusion using finite element analysis. , 2014, Medical Engineering and Physics.

[22]  Kai-Nan An,et al.  Consequences of Partial and Total Plantar Fascia Release: A Finite Element Study , 2006, Foot & ankle international.

[23]  Xiao Yu,et al.  The sustentaculum tali screw fixation for the treatment of Sanders type II calcaneal fracture: A finite element analysis , 1969, Pakistan journal of medical sciences.

[24]  T Y Shiang,et al.  The effect of insoles in therapeutic footwear--a finite element approach. , 1997, Journal of biomechanics.

[25]  E. V. van Lieshout,et al.  Current concepts in the treatment of intra-articular calcaneal fractures: results of a nationwide survey , 2007, International Orthopaedics.

[26]  Kangwu Chen,et al.  Comparison of Nonlocking Plates and Locking Plates for Intraarticular Calcaneal Fracture , 2014, Foot & ankle international.

[27]  H. Baur,et al.  Do changes in dynamic plantar pressure distribution, strength capacity and postural control after intra-articular calcaneal fracture correlate with clinical and radiological outcome? , 2011, Injury.

[28]  William R Ledoux,et al.  Finite element analysis of the foot: model validation and comparison between two common treatments of the clawed hallux deformity. , 2012, Clinical biomechanics.

[29]  John T. Campbell,et al.  A Biomechanical Comparison of Locking and Nonlocking Plates for the Fixation of Calcaneal Fractures , 2006, Foot & ankle international.