New approaches to improve cycle life characteristics of lithium-sulfur cells

Two different approaches were tried for an improvement of the cycle performance of Li–S cells: (1) A mixed polymer binder system of polyvinyl pyrrolidone (PVP) and polyethyleneimine (PEI) was developed to maintain the initial morphology of the carbon electrodes, the positive electrode of the Li–S cells, during charge–discharge cycles; (2) a tetrabutylammonium (TBA)-based mixed salt system was applied to an organic liquid electrolyte of the Li–S cells to change certain chemical reactions of polysulfides in the electrolyte solutions. The Li–S cells with PEI showed a significant improvement in cycle performance as well as in discharge capacity, compared with the Li–S cells using PVP only. The discharge capacity at the 50th cycle was found to be ∼580 mAh/g-sulfur, 83% of an initial capacity (∼720 mAh/g-sulfur), at a high current density of 2.0 mA cm−2. It was observed that the Li–S cells with a mixed electrolyte of 0.5 M LiCF3SO3/0.5 M TBAPF6 did not show a distinct improvement in the aspect of discharge capacity. The Li–S cells, however, showed a significant enhancement in the cycle life characteristics much better than that of Li–S cells with 1.0 M LiCF3SO3.

[1]  E. Peled,et al.  Lithium‐Sulfur Battery: Evaluation of Dioxolane‐Based Electrolytes , 1989 .

[2]  Soojin Park,et al.  Effects of imidazolium salts on discharge performance of rechargeable lithium–sulfur cells containing organic solvent electrolytes , 2005 .

[3]  G. Bosser,et al.  STABILIZATION OF S2 MOLECULES IN DIPOLAR APROTIC MEDIUM: INVESTIGATIONS ONTHE DISSOCIATION OF CYCLOOCTASULFUR IN DIMETHYLACETAMIDE , 1995 .

[4]  E. Levillain,et al.  Visible time-resolved spectroelectrochemistry: application to study of the reduction of sulfur (S8) in dimethylformamide , 1995 .

[5]  Zhonghua Gu,et al.  Electrochemical characterization and performance improvement of lithium/sulfur polymer batteries , 2005 .

[6]  F. Gaillard,et al.  On the understanding of the reduction of sulfur (S8) in dimethylformamide (DMF) , 1997 .

[7]  Su-Moon Park,et al.  In Situ Spectroelectrochemical Studies on the Reduction of Sulfur in Dimethyl Sulfoxide Solutions , 1993 .

[8]  B. Jung,et al.  Effect of cathode component on the energy density of lithium–sulfur battery , 2004 .

[9]  Emanuel Peled,et al.  Rechargeable lithiumsulfur battery (extended abstract) , 1989 .

[10]  P. Dubois,et al.  Identification and characterization of lithium polysulfides in solution in liquid ammonia , 1988 .

[11]  Kwang Man Kim,et al.  Preparation and electrochemical properties of lithium–sulfur polymer batteries , 2002 .

[12]  F. Gaillard,et al.  Polysulfides in dimethylformamide : Only the radical anions S3- and S4- are reducible , 1997 .

[13]  Hal-Bon Gu,et al.  Electrochemical properties of lithium–sulfur batteries , 2003 .

[14]  Emanuel Peled,et al.  The electrochemical behavior of polysulfides in tetrahydrofuran , 1985 .

[15]  F. Gaillard,et al.  Polysulfides in dimethylformamide: only the redox couples S−n/S2−n are involved , 1997 .

[16]  Jou-Hyeon Ahn,et al.  Discharge process of Li/PVdF/S cells at room temperature , 2006 .

[17]  Nam-In Kim,et al.  Correlation between positive-electrode morphology and sulfur utilization in lithium–sulfur battery , 2004 .

[18]  Yongju Jung,et al.  The effect of solvent component on the discharge performance of Lithium–sulfur cell containing various organic electrolytes , 2004 .

[19]  K. M. Abraham,et al.  A Lithium/Dissolved Sulfur Battery with an Organic Electrolyte , 1979 .