Analysis of thermally induced multistable composites

This paper models the non-linear flexural response of laminates that have piecewise variation of lay-up in the planform, using finite element analysis. Attention is focused on the effects that thermal stresses have on the potential multiple shapes of a composite structure. Unsymmetric laminates may possess more than a single equilibrium configuration, and during the cool-down the solution thus bifurcates at a critical temperature. In static analyses, numerical solutions are often coaxed to converge into one or the other branch of the solution. A methodology to overcome this problem is presented. Such modelling is necessary to allow application of multistable composite within morphing aircraft structures as multistable composites could provide a viable solution for the realisation of shape-adaptable structures.

[1]  Brian Falzon,et al.  Use of the Arc-Length Method for Capturing Mode Jumping in Postbuckling Aerostructures , 2005 .

[2]  Cv Clemens Verhoosel,et al.  Non-Linear Finite Element Analysis of Solids and Structures , 1991 .

[3]  Michael W. Hyer,et al.  Some Observations on the Cured Shape of Thin Unsymmetric Laminates , 1981 .

[4]  Michael W. Hyer,et al.  Thermally-induced deformation behavior of unsymmetric laminates , 1998 .

[5]  Masahisa Fujikake,et al.  A simple approach to bifurcation and limit point calculations , 1985 .

[6]  Paul M. Weaver,et al.  The application of residual stress tailoring of snap-through composites for variable sweep wings , 2006 .

[7]  R. Jones,et al.  Mechanics of Composite Materials , 2018 .

[8]  ScienceDirect,et al.  Composites science and technology , 1985 .

[9]  Werner Hufenbach,et al.  Analysis and optimisation of multistable composites under residual stresses , 2002 .

[10]  Michael W. Hyer,et al.  The Room-Temperature Shapes of Four-Layer Unsymmetric Cross-Ply Laminates , 1982 .

[11]  Serkan Ozbay,et al.  Anticlastic Stability Modeling for Cross-ply Composites , 2007 .

[12]  Michael W. Hyer,et al.  Snap-Through of Unsymmetric Cross-Ply Laminates Using Piezoceramic Actuators , 2003 .

[13]  Paul M. Weaver,et al.  A concept for the generation of out-of-plane distortion from tailored FRP laminates , 2004 .

[14]  Paul M. Weaver,et al.  Analysis of morphing, multi stable structures actuated by piezoelectric patches , 2008 .

[15]  Michael R Wisnom,et al.  Loss of bifurcation and multiple shapes of thin [0/90] unsymmetric composite plates subject to thermal stress , 2004 .

[16]  P. C. Dunne.  Finite elements, procedures in engineering analysis , 1982 .