Wear performance of polycrystalline diamond – tantalum composites tested against granite

[1]  M. Filgueira,et al.  Study of tantalum as an alternative binder of polycrystalline diamond , 2021 .

[2]  Jingkun Wang,et al.  Performance investigation of traditional diamond frame saw in processing granite , 2021 .

[3]  J. Zhang,et al.  Wear characteristics of diamond segments on multi-blade combination saw with different diameters in granite sawing , 2021, International Journal of Refractory Metals and Hard Materials.

[4]  E. Uhlmann,et al.  Selection of diamond coated silicon nitrides for use as ceramic end mills when machining glass and carbon fiber reinforced plastics , 2021 .

[5]  S. Jacobson,et al.  Influence of binder metal on wear initiation of cemented carbides in sliding contact with granite , 2021 .

[6]  Murat Çağlar Baydoğan,et al.  Determination of matrix composition for diamond cutting tools according to the hardness and abrasivity properties of rocks to be cut , 2021 .

[7]  Chong Xu,et al.  Dynamic modeling and experimental validation of vibration for diamond beaded rope during granite cutting , 2021 .

[8]  D. Macedo,et al.  Microstructure and mechanical properties of Al2O3 - WC - Co composites obtained by spark plasma sintering , 2021 .

[9]  W. Yue,et al.  Grain size dependent tribological behaviors of 700 °C annealed polycrystalline diamond , 2021 .

[10]  Q. Geng,et al.  Full-scale granite cutting experiments using tunnel boring machine disc cutters at different free-face conditions , 2020 .

[11]  M. Filgueira,et al.  Development of a novel triple-layer polycrystalline diamond compact , 2020 .

[12]  W. Yue,et al.  Thermal effects on tribological behaviors of polycrystalline cubic boron nitride , 2020 .

[13]  Baochang Liu,et al.  Wear resistance and thermal stability enhancement of PDC sintered with Ti-coated diamond and cBN , 2020 .

[14]  Samir M. Deyab,et al.  Experimental investigation on the effects of microwave irradiation on kimberlite and granite rocks , 2020 .

[15]  N. He,et al.  Fabrication of Large Aspect Ratio PCD Micro-milling Tool with Pulsed Lasers and Grinding , 2020, Journal of Manufacturing Processes.

[16]  T. Bergs,et al.  Tribological conditions in grinding of polycrystalline diamond , 2020 .

[17]  S. Ding,et al.  The manufacturing and the application of polycrystalline diamond tools – A comprehensive review , 2020 .

[18]  L. Bichler,et al.  Niobium as a new binder for polycrystalline diamond (PCD) sintered via High Pressure-High Temperature (HPHT) , 2020 .

[19]  M. Filgueira,et al.  Preparation and characterization of sintered polycrystalline diamond (PCD) with 15 wt% Nb binder , 2020, Diamond and Related Materials.

[20]  P. Sen,et al.  Influence of Cerchar hardness index of hard rock granite on wear of diamond tools , 2020 .

[21]  J. Comins,et al.  Micro-Raman and X-ray diffraction stress analysis of residual stresses in fatigue loaded leached polycrystalline diamond discs , 2020 .

[22]  Ming Chen,et al.  Influences of clearance angle and point angle on drilling performance of 2D Cf/SiC composites using polycrystalline diamond tools , 2020 .

[23]  Ming Chen,et al.  Hole exit quality and machined surface integrity of 2D Cf/SiC composites drilled by PCD tools , 2019, Journal of the European Ceramic Society.

[24]  A. Das,et al.  A review on cutting of industrial ceramic materials , 2019, Precision Engineering.

[25]  Jinsheng Zhang,et al.  Investigation and improvement of wear nonuniformity of diamond tools in sawing granite , 2019, International Journal of Refractory Metals and Hard Materials.

[26]  M. Filgueira,et al.  The influence of titanium carbide (TiC) coating over the thermal damage processes in diamonds , 2019, Journal of Alloys and Compounds.

[27]  J. Ståhl,et al.  Small scale testing of PCD and WC-Co tooling in rock cutting using longitudinal turning , 2019, Wear.

[28]  W. Yue,et al.  Effect of high temperature annealing on ultrahard polycrystalline diamond in air and vacuum conditions , 2019, International Journal of Refractory Metals and Hard Materials.

[29]  A. Erdemir,et al.  Superior wear resistance of diamond and DLC coatings , 2018, Current Opinion in Solid State and Materials Science.

[30]  S. Jacobson,et al.  On the deformation mechanisms of cemented carbide in rock drilling – Fundamental studies involving sliding contact against a rock crystal tip , 2018, International Journal of Refractory Metals and Hard Materials.

[31]  H. Ji,et al.  Effect of SiC whiskers on mechanical properties of thermally stable polycrystalline diamond prepared by HPHT sintering , 2018, Diamond and Related Materials.

[32]  Fubao Zhou,et al.  The Wear and Friction Characters of Polycrystalline Diamond Under Wetting Conditions , 2018, Journal of Tribology.

[33]  W. Yue,et al.  Thermal damage mechanisms of Si-coated diamond powder based polycrystalline diamond , 2018, Journal of the European Ceramic Society.

[34]  R. Gupta,et al.  Cutting Tool for Marble & Granite: A Review , 2018, IOP Conference Series: Materials Science and Engineering.

[35]  Kuan-Hong Lin,et al.  Effects of added nano titanium on the microstructure and mechanical properties of vitrified bond diamond tools , 2018, International Journal of Refractory Metals and Hard Materials.

[36]  Baochang Liu,et al.  Polycrystalline diamond compact with enhanced thermal stability , 2017 .

[37]  K. Takai,et al.  Boron-doped diamond synthesized at high-pressure and high-temperature with metal catalyst , 2017 .

[38]  W. Yue,et al.  Wear performances and mechanisms of ultrahard polycrystalline diamond composite material grinded against granite , 2016 .

[39]  W. Yue,et al.  Effect of sliding mating materials on vacuum tribological behaviors of sintered polycrystalline diamond , 2016 .

[40]  S. Jacobson,et al.  Initial degradation of cemented carbides for rock drilling — Model studies of the tribological contact against rock , 2015 .

[41]  Patric Waara,et al.  Wear on overlay welded HCWI vs. quenched and tempered low alloyed carbon steels evaluated with granite in a laboratory drum test machine , 2015 .

[42]  I. Sigalas,et al.  Characterisation of thermally degraded polycrystalline diamond , 2015 .

[43]  J. Qian,et al.  Polycrystalline diamond cutters sintered with magnesium carbonate in cubic anvil press , 2012 .

[44]  Edgar Dutra Zanotto,et al.  Mechanical and tribological properties of a sintered glass-ceramic compared to granite and porcelainized stoneware , 2011 .

[45]  M. Jackson,et al.  Tribology in manufacturing , 2011 .

[46]  I. R. Pashby,et al.  Review: Various methods of machining advanced ceramic materials , 1994 .

[47]  Y. Liao,et al.  Wear characteristics of sintered diamond composite during circular sawing , 1992 .