Simulation of airlift bioreactors: Steady-state performance of continuous culture processes

A tanks-in-series model was applied for mathematical modeling of the steady-state performance of continuous cultures in an airlift bioreactor. In the present computational algorithm, non-linear algebraic equations for the material balances of micro-organism, substrate and dissolved oxygen around the hypothetical well-mixed stages with backflow in the riser and downcomer were solved simultaneously using the Newton-Raphson technique. The concentration profiles of micro-organism, substrate and dissolved oxygen in the airlift bioreactor for continuous cultures were obtained under the same specifications. The simulation results were discussed mainly from the viewpoint of mixing in the airlift bioreactor. The relationships between the micro-organism productivity and design parameters of the airlift bioreactor such as liquid recycle flow rate and downcomer configuration were examined. The effect of mixing on the washout was also discussed. Numerical examples indicate that the proposed simulation scheme is very flexible and useful for the design and operation studies of airlift bioreactors.

[1]  L. T. Fan,et al.  Modeling and simulation of oxygen transfer in airlift fermentors , 1977 .

[2]  Johannes Tramper,et al.  Estimation of axial dispersion in individual sections of an airlift-loop reactor , 1989 .

[3]  Jose C. Merchuk,et al.  A distributed parameter model for an airlift fermentor. Effects of pressure , 1981 .

[4]  L. Fan,et al.  Models for flow systems and chemical reactors , 1975 .

[5]  Jose C. Merchuk,et al.  Distributed parameter model of an airlift fermentor , 1980 .

[6]  K. Schügerl,et al.  Performance of continuous tower loop bioreactors—II model calculations for substrate limited growth , 1982 .

[7]  G. Trystram,et al.  Oxygen transfer modeling and simulations for an industrial continuous airlift fermentor , 1992, Biotechnology and bioengineering.

[8]  Campbell W. Robinson,et al.  New criteria for application of the well-mixed model to gas-liquid mass transfer studies , 1983 .

[9]  L. T. Fan,et al.  Modelling and analysis of tower fermentation processes. I. Steady-state performance , 1972 .

[10]  M. Thoma,et al.  Model development, parameter identification, and simulation of SCP production processes in air lift tower reactors with external loop—II: Extended culture modelling and quasi steady state parameter identification , 1983 .

[11]  M. Thoma,et al.  Model development, parameter identification, and simulation of the SCP production process in air lift tower bioreactors with external loop—I: Generalized distributed parameter model , 1983 .

[12]  L. E. Erickson,et al.  Design and physical characteristics of a multistage, continuous tower fermentor , 1969 .