Review of electrical energy storage system for vehicular applications

Recently, automotive original equipment manufacturers have focused their efforts on developing greener propulsion solutions in order to meet the societal demand and ecological need for clean transportation, so the development of new energy vehicle (NEV) has become a consensus among governments and automotive enterprises. Efficient electrical energy storage system (EESS) appears to be very promising for meeting the rapidly increased requirements of vehicular applications. It is necessary to understand performances of electrical energy storage technologies. Therefore, this paper reviews the various electrical energy storage technologies and their latest applications in vehicle, such as battery energy storage (BES), superconducting magnetic energy storage (SMES), flywheel energy storage (FES), ultra-capacitor (UC) energy storage (UCES) and hybrid energy storage (HES). The research priorities and difficulties of each electrical energy storage technology are also presented and compared. Afterwards, the key technologies of EESS design for vehicles are presented. In addition, several conventional EESSs for vehicle applications are also analyzed; the comparison on advantages and disadvantages of various conventional EESSs is highlighted. From the rigorous review, it is observed that almost all current conventional EESSs for vehicles cannot meet a high-efficiency of power flow over the full operation range; optimization of EESS and improved control strategies will become an important research topic. Finally, this paper especially focuses on a type of linear engine, a brand new automotive propulsion system used for NEV; the guiding principle of EESS design for the new type of linear engine is proposed, an overview of a novel hybrid EESS based on hybrid power source and series–parallel switchover of UC with high efficiency under wide power flow range for the type of linear engine is presented, and advanced features of the novel hybrid EESS are highlighted.

[1]  B. Jang,et al.  Graphene surface-enabled lithium ion-exchanging cells: next-generation high-power energy storage devices. , 2011, Nano letters.

[2]  Ali Emadi,et al.  A Novel Digital Control Technique for Brushless DC Motor Drives , 2007, IEEE Transactions on Industrial Electronics.

[3]  Chang Si-qin,et al.  A High-Efficiency Regenerative Braking for Electric Vehicles , 2011 .

[4]  Mohammed A. Hannan,et al.  A review of the integration of Energy Storage Systems (ESS) for utility grid support , 2012 .

[5]  Srdjan M. Lukic,et al.  Topological overview of hybrid electric and fuel cell vehicular power system architectures and configurations , 2005, IEEE Transactions on Vehicular Technology.

[6]  B. J. Arnet,et al.  High power DC-to-DC converter for supercapacitors , 2001, IEMDC 2001. IEEE International Electric Machines and Drives Conference (Cat. No.01EX485).

[7]  Alireza Khaligh,et al.  Battery, Ultracapacitor, Fuel Cell, and Hybrid Energy Storage Systems for Electric, Hybrid Electric, Fuel Cell, and Plug-In Hybrid Electric Vehicles: State of the Art , 2010, IEEE Transactions on Vehicular Technology.

[8]  Siqin Chang,et al.  Prototype testing and analysis of a novel internal combustion linear generator integrated power system , 2010 .

[9]  J.R. Anstrom,et al.  Simulation and field-testing of hybrid ultra-capacitor/battery energy storage systems for electric and hybrid-electric transit vehicles , 2005, Twentieth Annual IEEE Applied Power Electronics Conference and Exposition, 2005. APEC 2005..

[10]  Chang Si-qin Optimization design of bi-directional DC/DC power converter of internal combustion-linear generator integrated power system , 2011 .

[11]  T. S. Bhatti,et al.  A review on electrochemical double-layer capacitors , 2010 .

[12]  K. C. Divya,et al.  Battery Energy Storage Technology for power systems-An overview , 2009 .

[13]  Jianqiu Li,et al.  A review on the key issues for lithium-ion battery management in electric vehicles , 2013 .

[14]  R. Mikalsen,et al.  A review of free-piston engine history and applications , 2007 .

[15]  Jorge Moreno,et al.  Energy-management system for a hybrid electric vehicle, using ultracapacitors and neural networks , 2006, IEEE Transactions on Industrial Electronics.

[16]  James G R Hansen,et al.  An Assessment of Flywheel High Power Energy Storage Technology for Hybrid Vehicles , 2011 .

[17]  Andreas Poullikkas,et al.  Overview of current and future energy storage technologies for electric power applications , 2009 .

[18]  Phatiphat Thounthong,et al.  Control strategy of fuel cell/supercapacitors hybrid power sources for electric vehicle , 2006 .

[19]  Siqin Chang,et al.  Improved Moving Coil Electric Machine for Internal Combustion Linear Generator , 2010, IEEE Transactions on Energy Conversion.

[20]  Malcolm McCulloch,et al.  Modeling the CO2 emissions from battery electric vehicles given the power generation mixes of different countries , 2011 .

[21]  Roger A. Dougal,et al.  A Compact Digitally Controlled Fuel Cell/Battery Hybrid Power Source , 2006, IEEE Transactions on Industrial Electronics.

[22]  Ali Emadi,et al.  ADVISOR-based model of a battery and an ultra-capacitor energy source for hybrid electric vehicles , 2004, IEEE Transactions on Vehicular Technology.

[23]  M. Y. Ayad,et al.  Vehicle hybridization with fuel cell, supercapacitors and batteries by sliding mode control , 2011 .

[24]  Zhang Chenghui,et al.  Particle Swarm Optimization for energy management fuzzy controller design in dual-source electric vehicle , 2007, 2007 IEEE Power Electronics Specialists Conference.

[25]  A. Morandi,et al.  Feasibility of Superconducting Magnetic Energy Storage on Board of Ground Vehicles With Present State-of-the-Art Superconductors , 2012, IEEE Transactions on Applied Superconductivity.

[26]  Patrice Simon,et al.  New Materials and New Configurations for Advanced Electrochemical Capacitors , 2008 .

[27]  T. Ghose,et al.  Converter Based DC Motor Speed Control Using TMS320LF2407A DSK , 2006, 2006 1ST IEEE Conference on Industrial Electronics and Applications.

[28]  Munehiro Kamiya,et al.  Development of Traction Drive Motors for the Toyota Hybrid System , 2006 .

[29]  Srdjan M. Lukic,et al.  Energy Storage Systems for Automotive Applications , 2008, IEEE Transactions on Industrial Electronics.

[30]  Xu Zhao-ping Conceptual Design of Internal Combustion-linear Generator Integrated Power System , 2008 .

[31]  A. Berthon,et al.  DC to DC converter with neural network control for on-board electrical energy management , 2004, The 4th International Power Electronics and Motion Control Conference, 2004. IPEMC 2004..

[32]  M. El‐Kady,et al.  Laser Scribing of High-Performance and Flexible Graphene-Based Electrochemical Capacitors , 2012, Science.

[33]  Frank Rinderknecht,et al.  Investigation of a high efficient free piston linear generator with variable stroke and variable compression ratio , 2006 .

[34]  Shuai Lu,et al.  A New Method of Utilizing Ultra-Capacitor Energy Sources in Hybrid Electric Vehicles Over a Wide Speed Range , 2007, APEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition.

[35]  Suzanna Long,et al.  Barriers to widespread adoption of electric vehicles: An analysis of consumer attitudes and perceptions , 2012 .

[36]  Davide Castelvecchi Spinning into control: High‐tech reincarnations of an ancient way of storing energy , 2009 .

[37]  John M. Miller Energy storage system technology challenges facing strong hybrid, plug-in and battery electric vehicles , 2009, 2009 IEEE Vehicle Power and Propulsion Conference.

[38]  Lee Schipper,et al.  Are We Reaching Peak Travel? Trends in Passenger Transport in Eight Industrialized Countries , 2010 .

[39]  Yu-Lung Ke,et al.  Energy Recovery Electric Bicycle with Two-Quadrant DC Motor Drivers , 2009, 2009 IEEE Industry Applications Society Annual Meeting.

[40]  Dmitri Vinnikov,et al.  Comparative Review of Long-Term Energy Storage Technologies for Renewable Energy Systems , 2012 .

[41]  Alon Kuperman,et al.  Battery–ultracapacitor hybrids for pulsed current loads: A review , 2011 .

[42]  Andreas Daberkow,et al.  Electric Car Operation and Flywheel Energy Storage , 2013 .

[43]  Peter Hall,et al.  Energy-storage technologies and electricity generation , 2008 .

[44]  Joong-Kee Lee,et al.  Employment of boron-doped carbon materials for the anode materials of lithium ion batteries , 2014 .

[45]  Mehmet Zeki Bilgin,et al.  Speed Control of Averaged DC Motor Drive System by Using Neuro-PID Controller , 2006, KES.

[46]  N. Omar,et al.  Assessment of lithium-ion capacitor for using in battery electric vehicle and hybrid electric vehicle applications , 2012 .

[47]  Jiabin Wang,et al.  Design and Experimental Verification of a Linear Permanent Magnet Generator for a Free-Piston Energy Converter , 2007, IEEE Transactions on Energy Conversion.

[48]  Ahmet Teke,et al.  A comprehensive overview of hybrid electric vehicle: Powertrain configurations, powertrain control techniques and electronic control units , 2011 .

[49]  M. Shahidehpour,et al.  Battery storage systems in electric power systems , 2006, 2006 IEEE Power Engineering Society General Meeting.

[50]  Jorge Moreno,et al.  Ultracapacitor-Based Auxiliary Energy System for an Electric Vehicle: Implementation and Evaluation , 2007, IEEE Transactions on Industrial Electronics.

[51]  Guizhou Ren,et al.  A Novel Scheme Design of Power Unit for Extended Range Electric Vehicles , 2012 .

[52]  Thomas H. Bradley,et al.  Design, demonstrations and sustainability impact assessments for plug-in hybrid electric vehicles , 2009 .

[53]  Mohamed Benbouzid,et al.  A review of energy storage technologies for marine current energy systems , 2013 .

[54]  R. H. Staunton,et al.  Evaluation of 2004 Toyota Prius Hybrid Electric Drive System , 2004 .

[55]  Chang Si-qin Energy Flow Control Strategy of Internal Combustion-linear Generator Integrated Power System , 2010 .

[56]  P. Van den Bossche,et al.  The Cell versus the System: Standardization challenges for electricity storage devices , 2009 .

[57]  Patricia H. Smith,et al.  Lithium-ion capacitors: Electrochemical performance and thermal behavior , 2013 .

[58]  Y. Ukyo,et al.  Performance of LiNiCoO2 materials for advanced lithium-ion batteries , 2005 .

[59]  Hans Bernhoff,et al.  Electrical Motor Drivelines in Commercial All-Electric Vehicles: A Review , 2012, IEEE Transactions on Vehicular Technology.

[60]  Shahrokh Farhangi,et al.  Fuzzy Control of a Hybrid Power Source for Fuel Cell Electric Vehicle using Regenerative Braking Ultracapacitor , 2006, 2006 12th International Power Electronics and Motion Control Conference.

[61]  Marco Amrhein,et al.  Dynamic simulation for analysis of hybrid electric vehicle system and subsystem interactions, including power electronics , 2005, IEEE Transactions on Vehicular Technology.

[62]  Kevin Cullinane,et al.  Cutting vehicle emissions with regenerative braking. , 2010 .

[63]  Andrew F. Burke,et al.  Batteries and Ultracapacitors for Electric, Hybrid, and Fuel Cell Vehicles , 2007, Proceedings of the IEEE.

[64]  Azah Mohamed,et al.  Hybrid electric vehicles and their challenges: A review , 2014 .

[65]  Christopher M Wolverton,et al.  Electrical energy storage for transportation—approaching the limits of, and going beyond, lithium-ion batteries , 2012 .

[66]  P. Novák,et al.  Memory effect in a lithium-ion battery. , 2013, Nature materials.

[67]  J. Apt,et al.  Lithium-ion battery cell degradation resulting from realistic vehicle and vehicle-to-grid utilization , 2010 .

[68]  C. C. Chan,et al.  The State of the Art of Electric, Hybrid, and Fuel Cell Vehicles , 2007, Proceedings of the IEEE.

[69]  Chee Wei Tan,et al.  A review of energy sources and energy management system in electric vehicles , 2013 .

[70]  Sheldon S. Williamson,et al.  Power-Electronics-Based Solutions for Plug-in Hybrid Electric Vehicle Energy Storage and Management Systems , 2010, IEEE Transactions on Industrial Electronics.

[71]  J. Jerome,et al.  Design and implementation of high power DC-DC converter and speed control of DC motor using TMS320F240 DSP , 2006, 2006 India International Conference on Power Electronics.

[72]  M. Nikdel,et al.  Various battery models for various simulation studies and applications , 2014 .

[73]  M. Becherif,et al.  Sliding mode control applied to fuel cell, supercapacitors and batteries for vehicle hybridizations , 2010, 2010 IEEE International Energy Conference.

[74]  M. Armand,et al.  Building better batteries , 2008, Nature.

[75]  Siqin Chang,et al.  A novel scheme design of UC banks based on series-parallel connections switchover for internal combustion-linear generator integrated power system , 2011 .

[76]  Wen Chen,et al.  A Novel Control Scheme for Electric Vehicle EV-Drive , 2008 .