Classical and advanced multilayered plate elements based upon PVD and RMVT. Part 1: Derivation of finite element matrices

This paper deals with the formulation of finite plate elements for an accurate description of stress and strain fields in multilayered, thick plates subjected to static loadings in the linear, elastic cases. The so-called zig-zag form and interlaminar continuity are addressed in the considered formulations. Two variational statements, the principle of virtual displacements (PVD) and the Reissner mixed variational theorem (RMVT) are employed to derive finite element matrices. Transverse stress assumptions are made in the framework of RMVT and the resulting finite elements describe a priori interlaminar continuous transverse shear and normal stresses. Both modellings which preserve the number of variables independent of the number of layers (equivalent single-layer models, ESLM) and layer-wise models (LWM) in which the same variables are independent in each layer, have been treated. The order N of the expansions assumed for both displacement and transverse stress fields in the plate thickness direction z as well as the number of element nodes Nn have been taken as free parameters of the considered formulations. By varying N, Nn, variable treatment (LW or ESL) as well as variational statements (PVD and RMVT), a large number of newly finite elements have been presented. Finite elements that are based on PVD and RMVT have been called classical and advanced, respectively. In order to write the matrices related to the considered plate elements in a concise form and to implement them in a computer code (see Part 2), extensive indicial notations have been set out. As a result, all the finite element matrices have been built from only five arrays that were called fundamental nuclei (four are related to RMVT applications and one to PVD cases). These arrays have 3×3 dimensions and are therefore constituted of only nine terms each. The different formulations are then obtained by expanding the indices that were introduced for the N-order expansion, for the number of nodes Nn and for the constitutive layers Nl. Compliances and/or stiffness are accumulated from layer to multilayered level according to the corresponding variable treatment (ESLM or LWM). The numerical evaluations and assessment for the presented plate elements have been provided in the companion paper (Part 2), where it has been concluded that it is convenient to refer to RMVT as a variational tool to formulate multilayered plate elements that are able to give a quasi-three-dimensional description of stress/strain fields in multilayered thick structures. Copyright © 2002 John Wiley & Sons, Ltd.

[1]  Giuseppe Davi,et al.  Stress Fields in General Composite Laminates , 1996 .

[2]  J. N. Reddy,et al.  Modelling of thick composites using a layerwise laminate theory , 1993 .

[3]  Ahmed K. Noor,et al.  Stress and free vibration analyses of multilayered composite plates , 1989 .

[4]  J. N. Reddy,et al.  A comparison of closed-form and finite-element solutions of thick laminated anisotropic rectangular plates , 1981 .

[5]  Mohamed Samir Hefzy,et al.  Review of Knee Models , 1988 .

[6]  Erasmo Carrera,et al.  AN ASSESSMENT OF MIXED AND CLASSICAL THEORIES FOR THE THERMAL STRESS ANALYSIS OF ORTHOTROPIC MULTILAYERED PLATES , 2000 .

[7]  A. Milazzo,et al.  BENDING STRESS FIELDS IN COMPOSITE LAMINATE BEAMS BY A BOUNDARY INTEGRAL FORMULATION , 1999 .

[8]  Charles W. Bert,et al.  Free vibrations of laminated rectangular plates analyzed by higher order individual-layer theory , 1991 .

[9]  E. Carrera.  Layer-Wise Mixed Models for Accurate Vibrations Analysis of Multilayered Plates , 1998 .

[10]  I. Babuska,et al.  Hierarchic models for laminated composites , 1992 .

[11]  E. Carrera.  An Improved Reissner-Mindlin-Type Model for the Electromechanical Analysis of Multilayered Plates Including Piezo-Layers , 1997 .

[12]  Erasmo Carrera,et al.  Single- vs Multilayer Plate Modelings on the Basis of Reissner's Mixed Theorem , 2000 .

[13]  Samuel Verbiese,et al.  Use of the Hybrid-Stress Finite-Element Model for the Static and Dynamic Analysis of Multilayer Composite Plates and Shells. , 1976 .

[14]  Venkat Aitharaju.  C0 Zigzag Kinematic Displacement Models for the Analysis of Laminated Composites , 1999 .

[15]  O. C. Zienkiewicz,et al.  A refined higher-order C° plate bending element , 1982 .

[16]  Rakesh K. Kapania,et al.  FREE VIBRATION ANALYSIS OF LAMINATED PLATES USING A LAYER-WISE THEORY , 1993 .

[17]  K. M. Liew,et al.  Differential quadrature method for thick symmetric cross-ply laminates with first-order shear flexibility , 1996 .

[18]  Paolo Gaudenzi,et al.  A finite element evaluation of single-layer and multi-layer theories for the analysis of laminated plates , 1995 .

[19]  Virat Chomkwah.  Finite element analysis of laminated composite plates , 1989 .

[20]  Demetres Briassoulis,et al.  The four-node C0 Mindlin plate bending element reformulated, Part II. Verification , 1993 .

[21]  J. Whitney,et al.  The Effect of Transverse Shear Deformation on the Bending of Laminated Plates , 1969 .

[22]  E. Carrera.  C0 REISSNER–MINDLIN MULTILAYERED PLATE ELEMENTS INCLUDING ZIG-ZAG AND INTERLAMINAR STRESS CONTINUITY , 1996 .

[23]  Ahmed K. Noor,et al.  Computational Models for Sandwich Panels and Shells , 1996 .

[24]  S. Vel,et al.  Analytical Solution for Rectangular Thick Laminated Plates Subjected to Arbitrary Boundary Conditions , 1999 .

[25]  Erasmo Carrera,et al.  Mixed layer-wise models for multilayered plates analysis , 1998 .

[26]  Hung-Sying Jing,et al.  Partial hybrid stress element for the analysis of thick laminated composite plates , 1989 .

[27]  Hidenori Murakami,et al.  A Laminated Beam Theory With Interlayer Slip , 1984 .

[28]  E. Carrera.  A refined multilayered finite-element model applied to linear and non-linear analysis of sandwich plates , 1998 .

[29]  Ahmed K. Noor,et al.  Assessment of Shear Deformation Theories for Multilayered Composite Plates , 1989 .

[30]  Erasmo Carrera,et al.  Evaluation of Layerwise Mixed Theories for Laminated Plates Analysis , 1998 .

[31]  Ferdinando Auricchio,et al.  Partial-mixed formulation and refined models for the analysis of composite laminates within an FSDT , 1999 .

[32]  Erasmo Carrera,et al.  A priori vs. a posteriori evaluation of transverse stresses in multilayered orthotropic plates , 2000 .

[33]  S. Vel,et al.  The generalized plane strain deformations of thick anisotropic composite laminated plates , 2000 .

[34]  Olivier Polit,et al.  High-order triangular sandwich plate finite element for linear and non-linear analyses , 2000 .

[35]  Koganti M. Rao,et al.  Analysis of thick laminated anisotropic composite plates by the finite element method , 1990 .

[36]  Erasmo Carrera,et al.  Classical and advanced multilayered plate elements based upon PVD and RMVT. Part 2: Numerical implementations , 2002 .

[37]  F. B. Hildebrand,et al.  Notes on the foundations of the theory of small displacements of orthotropic shells , 1949 .

[38]  K. M. Liew,et al.  Three-dimensional elasticity solutions to some orthotropic plate problems , 1999 .

[39]  S. Srinivas,et al.  A refined analysis of composite laminates , 1973 .

[40]  Erasmo Carrera.  A class of two-dimensional theories for anisotropic multilayered plates analysis , 1995 .

[41]  J. Ren.  Bending theory of laminated plate , 1986 .

[42]  Tarun Kant,et al.  Higher-order shear deformable theories for flexure of sandwich plates—Finite element evaluations , 1988 .

[43]  E. Reissner.  On a certain mixed variational theorem and a proposed application , 1984 .

[44]  Tarun Kant,et al.  Large amplitude free vibration analysis of cross-ply composite and sandwich laminates with a refined theory and C° finite elements , 1994 .

[45]  E. Carrera.  Developments, ideas, and evaluations based upon Reissner’s Mixed Variational Theorem in the modeling of multilayered plates and shells , 2001 .

[46]  Ekkehard Ramm,et al.  Hybrid stress formulation for higher-order theory of laminated shell analysis , 1993 .

[47]  Erasmo Carrera,et al.  Developments, Ideas and Evaluations based upon the Reissner's Mixed Variational Theorem in the Modeling of Multilayered Plates and Shells, Applied Mechanics Review, vol 54, pp 301-329 , 2001 .

[48]  Paolo Gaudenzi,et al.  A class of C0 finite elements for the static and dynamic analysis of laminated plates , 1992 .

[49]  K. Bathe,et al.  A four‐node plate bending element based on Mindlin/Reissner plate theory and a mixed interpolation , 1985 .

[50]  N. J. Pagano,et al.  Stress fields in composite laminates , 1978 .

[51]  Charles W. Bert,et al.  Differential Quadrature Analysis of Free Vibration of Symmetric Cross-Ply Laminates with Shear Deformation and Rotatory Inertia , 1995 .

[52]  Rakesh K. Kapania,et al.  Free vibration analysis of laminated plates using a layerwise theory , 1993 .

[53]  M. Poisson.  Mémoire sur l'équilibre et le mouvement des corps élastiques , 1828 .

[54]  J. N. Reddy,et al.  On refined computational models of composite laminates , 1989 .

[55]  Eugenio Oñate,et al.  A layer-wise triangle for analysis of laminated composite plates and shells , 1999 .

[56]  E. Carrera,et al.  An investigation of non-linear dynamics of multilayered plates accounting for C0z requirements , 1998 .

[57]  Maenghyo Cho,et al.  Efficient higher order composite plate theory for general lamination configurations , 1993 .

[58]  Peter M. Pinsky,et al.  A multi‐director formulation for elastic—viscoelastic layered shells , 1986 .

[59]  Demetres Briassoulis,et al.  The C° structural finite elements reformulated , 1992 .

[60]  A. Milazzo.  Interlaminar Stresses in Laminated Composite Beam-Type Structures Under Shear/Bending , 2000 .

[61]  N. Pagano,et al.  Exact Solutions for Rectangular Bidirectional Composites and Sandwich Plates , 1970 .

[62]  Tarun Kant,et al.  Flexural analysis of laminated composites using refined higher-order C ° plate bending elements , 1988 .

[63]  Y. C. Das,et al.  Vibration of layered shells , 1973 .

[64]  Alf Samuelsson,et al.  Linked interpolation for Reissner-Mindlin plate elements: Part I—A simple quadrilateral , 1993 .

[65]  Ahmed K. Noor,et al.  Finite element analysis of anisotropic plates , 1977 .

[66]  Moussa Karama,et al.  Comparison of various laminated plate theories , 1997 .

[67]  J. Reddy,et al.  THEORIES AND COMPUTATIONAL MODELS FOR COMPOSITE LAMINATES , 1994 .

[68]  Hidenori Murakami,et al.  A high-order laminated plate theory with improved in-plane responses☆ , 1987 .

[69]  K. Washizu.  Variational Methods in Elasticity and Plasticity , 1982 .

[70]  Marco Di Sciuva,et al.  Multilayered anisotropic plate models with continuous interlaminar stresses , 1992 .

[71]  G. Kirchhoff,et al.  Über das Gleichgewicht und die Bewegung einer elastischen Scheibe. , 1850 .

[72]  E. Carrera.  A study of transverse normal stress effect on vibration of multilayered plates and shells , 1999 .

[73]  Erasmo Carrera,et al.  Transverse Normal Stress Effects in Multilayered Plates , 1999 .

[74]  Jacob Fish,et al.  The s‐version of the finite element method for multilayer laminates , 1992 .

[75]  Ferdinando Auricchio,et al.  A mixed‐enhanced finite‐element for the analysis of laminated composite plates , 1999 .

[76]  J. N. Reddy,et al.  A penalty plate‐bending element for the analysis of laminated anisotropic composite plates , 1980 .

[77]  E. Antona.  Mathematical Models and Their Use in Engineering , 1994 .

[78]  R. Christensen,et al.  A High-Order Theory of Plate Deformation—Part 2: Laminated Plates , 1977 .

[79]  Liviu Librescu,et al.  Elastostatics and Kinetics of Anisotropic and Heterogeneous Shell-Type Structures , 1975 .

[80]  C. T. Sun,et al.  A three-dimensional hybrid stress isoparametric element for the analysis of laminated composite plates , 1987 .

[81]  J. Reddy.  Mechanics of laminated composite plates : theory and analysis , 1997 .

[82]  Erasmo Carrera,et al.  Multilayered shell finite element with interlaminar continuous shear stresses : a refinement of the Reissner-Mindlin formulation , 2000 .

[83]  J. Reddy,et al.  Stability and vibration of isotropic, orthotropic and laminated plates according to a higher-order shear deformation theory , 1985 .

[84]  E. Carrera,et al.  Zig-Zag and interlaminar equilibria effects in large deflection and postbuckling analysis of multilayered plates , 1997 .

[85]  J. Reddy.  An introduction to the finite element method , 1989 .

[86]  R. D. Mindlin,et al.  Influence of rotary inertia and shear on flexural motions of isotropic, elastic plates , 1951 .

[87]  O. Orringer,et al.  Alternate Hybrid-Stress Elements for Analysis of Multilayer Composite Plates , 1977 .

[88]  Jiann-Quo Tarn,et al.  Three-dimensional asymptotic finite element method for anisotropic inhomogeneous and laminated plates , 1996 .

[89]  N. Pagano,et al.  Exact Solutions for Composite Laminates in Cylindrical Bending , 1969 .

[90]  Ronald C. Averill,et al.  First-order zig-zag sublaminate plate theory and finite element model for laminated composite and sandwich panels , 2000 .

[91]  H. Murakami,et al.  A high-order mixture model for periodic particulate composites , 1987 .

[92]  N. Siva Prasad,et al.  An adaptive mesh generation scheme for finite element analysis , 1994 .

[93]  Y. Stavsky,et al.  Elastic wave propagation in heterogeneous plates , 1966 .

[94]  Hidenori Murakami,et al.  A Composite Plate Theory for Arbitrary Laminate Configurations. , 1987 .

[95]  J. Reddy.  Energy and variational methods in applied mechanics : with an introduction to the finite element method , 1984 .

[96]  Richard M. Barker,et al.  A Finite-Element Analysis Including Transverse Shear Effects for Applications to Laminated Plates , 1971 .

[97]  E. Reissner.  On a mixed variational theorem and on shear deformable plate theory , 1986 .

[98]  E. Reissner.  The effect of transverse shear deformation on the bending of elastic plates , 1945 .

[99]  Rakesh K. Kapania,et al.  Recent advances in analysis of laminated beams and plates. Part I - Sheareffects and buckling. , 1989 .

[100]  N. J. Pagano,et al.  Elastic Behavior of Multilayered Bidirectional Composites , 1972 .

[101]  Erasmo Carrera,et al.  CZ° requirements—models for the two dimensional analysis of multilayered structures , 1997 .

[102]  C. Sun,et al.  Theories for the Dynamic Response of Laminated Plates , 1973 .

[103]  Hidenori Murakami,et al.  Laminated Composite Plate Theory With Improved In-Plane Responses , 1986 .

[104]  J. Reddy.  An evaluation of equivalent-single-layer and layerwise theories of composite laminates , 1993 .

[105]  J. Ren,et al.  A new theory of laminated plate , 1986 .

[106]  Ahmed K. Noor,et al.  Predictor-corrector procedures for stress and free vibration analysis of multilayered composite plates and shells , 1990 .

[107]  J. Reddy.  A Simple Higher-Order Theory for Laminated Composite Plates , 1984 .

[108]  David R. Owen,et al.  Vibration and buckling of laminated plates , 1989 .