Inclusion removal by bubble flotation in a continuous casting mold

Fundamentally based computational models are developed and applied to quantify the removal of inclusions by bubbles during the continuous casting of steel. First, the attachment probability of inclusions on a bubble surface is investigated based on fundamental fluid flow simulations, incorporating the turbulent inclusion trajectory and sliding time of each individual inclusion along the bubble surface as a function of particle and bubble size. Then, the turbulent fluid flow in a typical continuous casting mold, trajectories of bubbles, and their path length in the mold are calculated. The change in inclusion distribution due to removal by bubble transport in the mold is calculated based on the computed attachment probability of inclusions on each bubble and the computed path length of the bubbles. In addition to quantifying inclusion removal for many different cases, the results are important to evaluate the significance of different inclusion-removal mechanisms. The modeling approach presented here is a powerful tool for investigating multiscale phenomena in steelmaking and casting operations to learn how to optimize conditions to lower defects.

[1]  P. Hayes,et al.  A New Approach to Molten Steel Refining Using Fine Gas Bubbles , 1996 .

[2]  A. K. Agrawal,et al.  Shape of liquid drops moving in liquid media , 1966 .

[3]  B. Thomas,et al.  Large Inclusions in Plain-carbon Steel Ingots Cast by Bottom Teeming , 2006 .

[4]  Kevin Barraclough,et al.  I and i , 2001, BMJ : British Medical Journal.

[5]  S G Zhang,et al.  A feature-based inspection process planning system for co-ordinate measuring machine (CMM) , 2000 .

[6]  S. Taniguchi,et al.  Water model study on inclusion removal from liquid steel by bubble flotation under turbulent conditions , 2002 .

[7]  Mari Tuomaala,et al.  ICS 2005 - The 3rd International Congress on the Science and Technology of Steelmaking , 2005 .

[8]  S. Taniguchi,et al.  Fundamentals of inclusion removal from liquid steel by bubble flotation , 2000 .

[9]  Á. Székely.  The removal of solid particles from molten aluminum in the spinning nozzle inert flotation process , 1976 .

[10]  H. Schubert.  On the turbulence-controlled microprocesses in flotation machines , 1999 .

[11]  John B. Shoven,et al.  I , Edinburgh Medical and Surgical Journal.

[12]  M. Hirasawa,et al.  Rate of SiO2 Inclusion Removal from Molten Cu to Slag under Gas Injection Stirring Condition , 1994 .

[13]  J. K. Brimacombe,et al.  Plume characteristics and liquid circulation in gas injection through a porous plug , 1990 .

[14]  Roderick I. L. Guthrie,et al.  Hydrodynamics of gas stirred melts: Part I. Gas/liquid coupling , 1982 .

[15]  Peter C. Hayes,et al.  modelling of air ingress and pressure distribution in ladle shroud system for continuous casting of steel , 1995 .

[16]  Brian G. Thomas,et al.  Inclusion Investigation during Clean Steel Production at Baosteel , 2003 .

[17]  Brian G. Thomas,et al.  Mathematical Modeling of Fluid Flow in Continuous Casting , 2001 .

[18]  Jan D. Miller,et al.  The significance of bubble/particle contact time during collision in the analysis of flotation phenomena , 1989 .

[19]  Yongkun Xie,et al.  Behaviour of Bubbles at Gas Blowing into Liquid Wood's Metal , 1992 .

[20]  Hua Bai,et al.  Turbulent flow of liquid steel and argon bubbles in slide-gate tundish nozzles: Part I. model development and validation , 2001 .

[21]  M. A. Azouni,et al.  Thermal aspects of particle engulfment by a solidifying front , 1993 .

[22]  Hua Bai,et al.  Behavior of Argon Bubbles during Continuous Casting of Steel , 1997 .

[23]  M. Iguchi,et al.  Bubble and liquid flow characteristics in a wood’s metal bath stirred by bottom helium gas injection , 1997 .

[24]  P. Hayes,et al.  Particle Removal from Liquid Phase Using Fine Gas Bubbles , 1997 .

[25]  Brian G. Thomas,et al.  State of the Art in Evaluation and Control of Steel Cleanliness , 2003 .

[26]  J. K. Kim,et al.  An analytical solution of the critical interface velocity for the encapturing of insoluble particles by a moving solid/liquid interface , 1998 .

[27]  G. Abbel,et al.  Argon bubbles in slabs, a non-homogeneous distribution , 1997 .

[28]  H. Schulze,et al.  Hydrodynamics of Bubble-Mineral Particle Collisions , 1989 .

[29]  D. Stefanescu,et al.  Calculation of the critical velocity for the pushing/engulfment transition of nonmetallic inclusions in steel , 1998 .

[30]  Yuji Miki,et al.  Internal defects of continuous casting slabs caused by asymmetric unbalanced steel flow in Mold , 2003 .

[31]  R. Clift,et al.  Bubbles, Drops, and Particles , 1978 .

[32]  M. Iguchi,et al.  Turbulence structure of bottom-blowing bubbling jet in a molten Wood’s metal bath , 1999 .

[33]  Brian G. Thomas,et al.  Study of transient flow and particle transport in continuous steel caster molds: Part II. Particle transport , 2004 .

[34]  Hua Bai,et al.  Bubble formation during horizontal gas injection into downward-flowing liquid , 2001 .

[35]  Lifen Zhang.  Mathematical simulation of fluid flow in gas-stirred liquid systems , 2000 .

[36]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[37]  S. H. Park,et al.  The Splitting of Drops and Bubbles by Turbulent Fluid Flow , 1973 .

[38]  Brian G. Thomas,et al.  Model of inclusion removal during RH degassing of steel , 1997 .