Determination of the design specifications of a powered humeral rotator for a myoelectric prosthesis

The University of Bologna and the INAIL Prosthesis Centre are collaborating to design new high-functionality prostheses for upper-limb amputees, with a high-level amputation, who are currently rehabilitated by inadequate commercial solutions. This study deals with the development of a new powered humeral rotator that should integrate the prosthesis previously developed by the research group, which is already provided with a terminal device, a wrist rotator, an elbow joint, and a prototype of shoulder articulation composed of two powered revolute joints. This paper focuses on the design methodology that was followed to retrieve the design input data necessary for the development of the humeral rotator. The methodology is mainly based on kinematic and kinetostatic analyses of multibody models of upper-limb prostheses. The kinematic simulations are used to define the ability of the arm models (that have less than the six degrees of freedom required for generically positioning and orienting the terminal device) satisfactorily to perform important activities of daily living, i.e. with an acceptable accuracy. Kinetostatic analyses are then performed to determine the loads acting on the humeral rotator when performing the mentioned activities, thus making it possible to define fundamental design guidelines and technical specifications.

[1]  Robert D. Lipschutz,et al.  The use of targeted muscle reinnervation for improved myoelectric prosthesis control in a bilateral shoulder disarticulation amputee , 2004, Prosthetics and orthotics international.

[2]  Vincenzo Parenti-Castelli,et al.  Development of a prosthesis shoulder mechanism for upper limb amputees: application of an original design methodology to optimize functionality and wearability , 2009, Medical & Biological Engineering & Computing.

[3]  Raymond G. Gosine,et al.  A functional task analysis and motion simulation for the development of a powered upper-limb orthosis , 1994 .

[4]  Ingram Andrew. Murray.  Determining upper limb kinematics and dynamics during everyday tasks , 1999 .

[5]  U. Wyss,et al.  Review of arm motion analyses , 2000, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[6]  Zhen Huang,et al.  Kinematics of a five degree-of-freedom prosthetic arm , 1998 .

[7]  R Seliktar,et al.  Analysis of arm trajectories of everyday tasks for the development of an upper-limb orthosis. , 2000, IEEE transactions on rehabilitation engineering : a publication of the IEEE Engineering in Medicine and Biology Society.

[8]  L. Leija,et al.  Status of elbow myoelectric prosthesis: CINVESTAV-IPN prosthesis , 2009 .

[9]  Richard F. ff. Weir,et al.  CHAPTER 32 DESIGN OF ARTIFICIAL ARMS AND HANDS FOR PROSTHETIC APPLICATIONS , 2005 .

[10]  William Harwin,et al.  Devices for assisting manipulation: a summary of user task priorities , 1994 .

[11]  G R Johnson,et al.  Dynamics of the Upper Limb during Performance of the Tasks of Everyday Living—A Review of the Current Knowledge Base , 1996, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[12]  Richard F. Weir,et al.  Powered Humeral Rotator for Persons with Shoulder Disarticulation Amputations , 2005 .

[13]  J P Paul,et al.  Three-Dimensional Joint Co-Ordination Strategies of the Upper Limb during Functional Activities , 1996, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[14]  Javier García de Jalón,et al.  Kinematic and Dynamic Simulation of Multibody Systems , 1994 .

[15]  Douglas Kerns,et al.  MULTIFUNCTION PROSTHESIS CONTROL USING IMPLANTED MYOELECTRIC SENSORS (IMES) , 2008 .

[16]  M. Kawato,et al.  Formation and control of optimal trajectory in human multijoint arm movement , 1989, Biological Cybernetics.

[17]  Vincenzo Parenti Castelli,et al.  A new protocol for experimental determination of human hand reference trajectories for the synthesis of upper limb prostheses , 2007 .

[18]  Vincenzo Parenti-Castelli,et al.  Synthesis of Prosthesis Architectures and Design of Prosthetic Devices for Upper Limb Amputees , 2007 .

[19]  Vincenzo Parenti-Castelli,et al.  A Novel Electromechanical Shoulder Articulation for Upper-Limb Prostheses: From the Design to the First Clinical Application , 2009 .

[20]  C. Granger,et al.  PERFORMANCE PROFILES OF THE FUNCTIONAL INDEPENDENCE MEASURE , 1993, American journal of physical medicine & rehabilitation.

[21]  L. Leija,et al.  Estado de las prótesis mioeléctricas de codo: Prótesis del CINVESTAV-IPN , 2009 .