Heteroepitaxial integration of InAs/InAsSb type-II superlattice barrier photodetectors onto silicon

GaSb-based materials can be used to produce high performance photonic devices operating in the technologically important mid-infrared spectral range. Direct epitaxial growth of GaSb on silicon (Si) is an attractive method to reduce manufacturing costs and opens the possibility of new applications, such as lab-on-a-chip MIR photonic integrated circuits and monolithic integration of focal plane arrays (FPAs) with Si readout integrated circuits (ROICs). However, fundamental material dissimilarities, such as the large lattice mismatch, polar-nonpolar character of the III-V/Si interface and differences in thermal expansion coefficients lead to the formation of threading dislocations and antiphase domains, which effect the device performance. This work reports on the molecular beam epitaxial growth of high quality GaSb-based materials and devices onto Si. This was achieved using a novel growth procedure consisting of an efficient AlSb interfacial misfit array, a two-step GaSb growth temperature procedure and a series of dislocation filter superlattices, resulting in a low defect density, anti-phase domain free GaSb buffer layer on Si. A nBn barrier photodetector based on a type-II InAs/InAsSb superlattice was grown on top of the buffer layer. The device exhibited an extended 50 % cut-off wavelength at 5.40 μm at 200 K which moved to 5.9 μm at 300 K. A specific detectivity of 1.5 x1010 Jones was measured, corresponding in an external quantum efficiency of 25.6 % at 200 K.

[1]  R. Synowicki,et al.  Absorption properties of type-II InAs/InAsSb superlattices measured by spectroscopic ellipsometry , 2015 .

[2]  J. Klem,et al.  Bandgap and temperature dependence of Auger recombination in InAs/InAsSb type-II superlattices , 2016 .

[3]  Steve Grossman,et al.  MWIR InAsSb XBn detectors for high operating temperatures , 2010, Defense + Commercial Sensing.

[4]  S. Krishna,et al.  InAs/InAsSb strain balanced superlattices for optical detectors: Material properties and energy band simulations , 2012 .

[5]  A. D. Prins,et al.  Evidence for a defect level above the conduction band edge of InAs/InAsSb type-II superlattices for applications in efficient infrared photodetectors , 2015 .

[6]  Shui-Qing Yu,et al.  Determination and improvement of spontaneous emission quantum efficiency in GaAs/AlGaAs heterostructures grown by molecular beam epitaxy , 2007 .

[7]  Zhiyuan Lin,et al.  Proton radiation effects on the photoluminescence of infrared InAs/InAsSb superlattices , 2013, Optics & Photonics - Optical Engineering + Applications.

[8]  T. F. Boggess,et al.  Time-resolved optical measurements of minority carrier recombination in a mid-wave infrared InAsSb alloy and InAs/InAsSb superlattice , 2012 .

[9]  L. Largeau,et al.  Characterization of antimonide based material grown by molecular epitaxy on vicinal silicon substrates via a low temperature AlSb nucleation layer , 2017 .

[10]  Veronica Letka,et al.  Mid-Infrared InAs/InAsSb Superlattice nBn Photodetector Monolithically Integrated onto Silicon , 2019, ACS Photonics.

[11]  Jerry R. Meyer,et al.  Band parameters for III–V compound semiconductors and their alloys , 2001 .

[12]  Sanjay Krishna,et al.  Mid-infrared InAs0.79Sb0.21-based nBn photodetectors with Al0.9Ga0.2As0.1Sb0.9 barrier layers, and comparisons with InAs0.87Sb0.13 p-i-n diodes, both grown on GaAs using interfacial misfit arrays , 2013 .

[13]  Manijeh Razeghi,et al.  InAs/InAs1−xSbx type-II superlattices for high performance long wavelength infrared detection , 2014 .