Ductile–brittle transition controlled by isothermal crystallization of isotactic polypropylene and its blend with poly(ethylene-co-octene)

[1]  Dujing Wang,et al.  Interplay between crystallization behaviors and extensional deformation of isotactic polypropylene and its blend with poly(ethylene-co-octene) , 2008 .

[2]  Dujing Wang,et al.  Nascent Phase Separation and Crystallization Kinetics of an iPP/PEOc Polymer Alloy Prepared on a Single Multicatalyst Reactor Granule , 2008 .

[3]  Ying Zhao,et al.  Time evolution of phase structure and corresponding mechanical properties of iPP/PEOc blends in the late-stage phase separation and crystallization , 2007 .

[4]  Q. Fu,et al.  Effect of temperature and strain rate on the tensile deformation of polyamide 6 , 2007 .

[5]  Y. Shieh,et al.  Temperature‐modulated differential scanning calorimetry studies on the origin of double melting peaks in isothermally melt‐crystallized poly(L‐lactic acid) , 2007 .

[6]  Jun Xu,et al.  Crystallization kinetics and morphology of biodegradable poly(butylene succinate‐co‐propylene succinate)s , 2007 .

[7]  C. Han,et al.  Shear‐Induced Crystallization in a Blend of Isotactic Poly(propylene) and Poly(ethylene‐co‐octene) , 2006 .

[8]  M. Kontopoulou,et al.  Effect of composition and comonomer type on the rheology, morphology and properties of ethylene-α-olefin copolymer/polypropylene blends , 2003 .

[9]  Jinhai Yang,et al.  Brittle–ductile transition of PP/POE blends in both impact and high speed tensile tests , 2003 .

[10]  K. Premphet,et al.  Polypropylene/metallocene ethylene-octene copolymer blends with a bimodal particle size distribution: Mechanical properties and their controlling factors , 2002 .

[11]  R. Benavente,et al.  Effect of composition and molecular weight on the crystallization behavior of blends of iPP and a metallocenic ethylene/1-octene copolymer , 2002 .

[12]  P. McShane,et al.  Rheology, phase morphology, mechanical, impact and thermal properties of polypropylene/metallocene catalysed ethylene 1-octene copolymer blends , 2002 .

[13]  S. Kohjiya,et al.  Structural development and mechanical properties on immiscible and miscible blends from isotactic polypropylene and ethylene–1-hexene copolymers under uniaxial drawing , 2002 .

[14]  Howard Wang,et al.  Structure and morphology development in syndiotactic polypropylene during isothermal crystallization and subsequent melting , 2001 .

[15]  B. Hsiao,et al.  Morphology development during isothermal crystallization. II. Isotactic and syndiotactic polypropylene blends , 2000 .

[16]  R. E. S. Bretas,et al.  Rheological and morphological properties of blends based on ethylene-octene copolymer and polypropylene , 2000 .

[17]  R. Li,et al.  Brittle–tough transition in PP/EPDM blends: effects of interparticle distance and tensile deformation speed , 2000 .

[18]  R. E. S. Bretas,et al.  Rheological, mechanical, thermal, and morphological properties of polypropylene/ethylene-octene copolymer blends , 2000 .

[19]  Haojun Liang,et al.  Brittle-tough transition in PP/EPDM blends: effects of interparticle distance and temperature , 1998 .

[20]  A. Peacock,et al.  Tensile Properties of Crystalline Polymers: Random Copolymers of Ethylene , 1995 .

[21]  T. Ezquerra,et al.  Phase Separation and Crystallization Phenomena in a Poly(ester-carbonate) Block Copolymer: A Real-Time Dielectric Spectroscopic and X-ray Scattering Study , 1995 .

[22]  A. Peacock,et al.  Tensile Properties of Crystalline Polymers: Linear Polyethylene , 1994 .

[23]  A. Peacock,et al.  The brittle‐ductile transition in linear polyethylene , 1993 .

[24]  J. Rault,et al.  Origin of the long period and crystallinity in quenched semicrystalline polymers. 1 , 1989 .

[25]  R. J. Gaymans,et al.  Brittle-tough transition in nylon-rubber blends: effect of rubber concentration and particle size , 1987 .

[26]  P. C. Jain,et al.  Melting behaviour of isotactic polypropylene isothermally crystallized from the melt , 1986 .

[27]  Souheng Wu.  Phase structure and adhesion in polymer blends: a criterion for rubber toughening , 1985 .

[28]  D. Uhlmann,et al.  Ductile–brittle transition in polymers , 1984 .

[29]  Eric Baer,et al.  The pressure and temperature effects on brittle‐to‐ductile transition in PS and PMMA , 1976 .

[30]  A. Keller,et al.  Study of crystallization and isothermal thickening in polyethylene using SAXD, low frequency Raman spectroscopy and electron microscopy , 1976 .

[31]  R. Samuels.  Structured polymer properties: The identification, interpretation, and application of crystalline polymer structure , 1974 .

[32]  J. Hoffman,et al.  X‐Ray Study of Isothermal Thickening of Lamellae in Bulk Polyethylene at the Crystallization Temperature , 1965 .