Strength and fracture properties of asbestos-cement mortar composites

The strength and fracture properties of random asbestos fibre-reinforced cement mortar composites are reported in this paper. The fibre content varies between 5% and 20% by weight. Both the ultimate tensile strength (σt) and the modulus of rupture (σb) increase with increasing fibre-volume fraction. These results are shown to agree satisfactorily with the law of mixtures modified for randomly oriented short fibre-reinforced composites. The critical stress intensity factor (Kc) and the specific work of fracture (R) have been determined using three-point bend edge-notched beams and grooved double-cantilever-beam (DCB) specimens. There is generally good agreement between these two physical quantities estimated from the two testpiece geometries. It is shown that the fibre pull-out mechanism is dominant in the fracture of asbestos cements and that the specific work of fracture can be reasonably well predicted by considering the energies absorbed in both the pull-out and the fibre/matrix interfacial debonding processes.

[1]  P. L. Walton,et al.  Properties of cement composites reinforced with Kevlar fibres , 1978 .

[2]  S. Mindess,et al.  Effect of notch width on KIC for mortar and concrete , 1976 .

[3]  R C Devekey,et al.  Determining bond strength in fibre-reinforced composites , 1968 .

[4]  B. Harris,et al.  The fracture behaviour of fibre reinforced concrete , 1972 .

[5]  A. Atkins,et al.  Interfacial fracture energy and the toughness of composites , 1974 .

[6]  J. M. West,et al.  Properties of glass fibres in cement environment , 1977 .

[7]  H. G. Allen.  Tensile properties of seven asbestos cements , 1971 .

[8]  J. H. Brown,et al.  Measuring the fracture toughness of cement paste and mortar , 1972 .

[9]  J. Aveston.  The mechanical properties of asbestos , 1969 .

[10]  M. Taylor,et al.  Study of Portland cement fracture surfaces by scanning electron microscopy techniques , 1974 .

[11]  M. A. Ali,et al.  Properties of glass fibre cement — the effect of fibre length and content , 1975 .

[12]  F. Radjy,et al.  Fracture of hardened cement paste and concrete , 1973 .

[13]  Yiu-Wing Mai,et al.  Stability of cracking , 1972 .

[14]  J. Rice.  A path-independent integral and the approximate analysis of strain , 1968 .

[15]  R. Davidge,et al.  The effective surface energy of brittle materials , 1968 .

[16]  C. Gurney,et al.  Quasi-static crack propagation , 1967, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[17]  C. J. Martin,et al.  The texture of chrysotile asbestos in relationship to mechanical properties , 1977 .

[18]  J. E. Bailey,et al.  On the hydration of Portland cement , 1978, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[19]  H. Tattersall,et al.  The work of fracture and its measurement in metals, ceramics and other materials , 1966 .

[21]  P. L. Walton,et al.  Cement-based composites with mixtures of different types of fibres , 1975 .

[22]  Sidney Mindess,et al.  The J-integral as a fracture criterion for fiber reinforced concrete , 1977 .

[23]  L. Broutman,et al.  Strength and fracture properties of random fibre polyester composites , 1976 .