Catalytic Oxidation of Alkanes by Organometallics in an In Situ Combustion Process

[1]  M. Varfolomeev,et al.  Crude Oil Oxidation in an Air Injection Based Enhanced Oil Recovery Process: Chemical Reaction Mechanism and Catalysis , 2022, Energy & Fuels.

[2]  Wan-fen Pu,et al.  Thermo-oxidative characteristics and kinetics of light, heavy, and extra-heavy crude oils using accelerating rate calorimetry , 2022, Fuel.

[3]  M. Varfolomeev,et al.  Catalytic combustion of heavy crude oil by oil-dispersed copper-based catalysts: Effect of different organic ligands , 2022, Fuel.

[4]  A. Kovscek,et al.  Analysis and comparison of in-situ combustion chemical reaction models , 2021, Fuel.

[5]  J. Qajar,et al.  Synergistic effects of ultrasonic irradiation and α-Fe2O3 nanoparticles on the viscosity and thermal properties of an asphaltenic crude oil and their application to in-situ combustion EOR , 2021, Ultrasonics.

[6]  M. Varfolomeev,et al.  Oxidation of Heavy Oil Using Oil-Dispersed Transition Metal Acetylacetonate Catalysts for Enhanced Oil Recovery , 2021, Energy & Fuels.

[7]  M. Varfolomeev,et al.  Catalytic combustion of heavy oil using γ-Fe2O3 nanocatalyst in in-situ combustion process , 2021, Journal of Petroleum Science and Engineering.

[8]  M. Varfolomeev,et al.  Fundamental insight into pyrolysis and oxidation process of ferric (III) stearate , 2021, Journal of Analytical and Applied Pyrolysis.

[9]  R. Zhao,et al.  Catalytic effects of Al2O3 nano-particles on thermal cracking of heavy oil during in-situ combustion process , 2021 .

[10]  M. Varfolomeev,et al.  Effect of copper stearate as catalysts on the performance of in-situ combustion process for heavy oil recovery and upgrading , 2021 .

[11]  M. Varfolomeev,et al.  Oil-Dispersed α-Fe2O3 Nanoparticles as a Catalyst for Improving Heavy Oil Oxidation , 2021, Energy & Fuels.

[12]  L. Yakimova,et al.  Improving heavy oil oxidation performance by oil-dispersed CoFe2O4 nanoparticles in In-situ combustion process for enhanced oil recovery , 2021 .

[13]  M. V. Kok,et al.  TGA and DSC investigation of different clay mineral effects on the combustion behavior and kinetics of crude oil from Kazan region, Russia , 2021 .

[14]  M. Varfolomeev,et al.  Mechanistic and kinetic insight into catalytic oxidation process of heavy oil in in-situ combustion process using copper (Ⅱ) stearate as oil soluble catalyst , 2021 .

[15]  M. V. Kok,et al.  Effect of inlet pressure on crude oil combustion -laboratory approach- , 2020 .

[16]  Wan-fen Pu,et al.  Low-temperature combustion characteristics of heavy oils by a self-designed porous medium thermo-effect cell , 2020 .

[17]  M. Varfolomeev,et al.  Interaction between aromatics and n-alkane for in-situ combustion process , 2020 .

[18]  Wan-fen Pu,et al.  Low-temperature combustion behavior of crude oils in porous media under air flow condition for in-situ combustion (ISC) process , 2020 .

[19]  M. Varfolomeev,et al.  Potential of Copper-Based Oil Soluble Catalyst for Improving Efficiency of In-Situ Combustion Process: Catalytic Combustion, Catalytic In-Situ Oil Upgrading, and Increased Oil Recovery , 2019, Day 3 Tue, October 15, 2019.

[20]  M. Varfolomeev,et al.  Combustion behavior of aromatics and their interaction with n-alkane in in-situ combustion enhanced oil recovery process: Thermochemistry , 2019, Journal of Industrial and Engineering Chemistry.

[21]  Teng-Fei Wang,et al.  Catalytic Effect of Cobalt Additive on the Low Temperature Oxidation Characteristics of Changqing Tight Oil and Its SARA Fractions , 2019, Energies.

[22]  M. Khelkhal,et al.  Impact of Iron Tallate on the Kinetic Behavior of the Oxidation Process of Heavy Oils , 2019, Energy & Fuels.

[23]  M. Varfolomeev,et al.  Comparison of oxidation behavior of linear and branched alkanes , 2019, Fuel Processing Technology.

[24]  Z. Fan,et al.  Enhanced in situ combustion of heavy crude oil by nickel oxide nanoparticles , 2019, International Journal of Energy Research.

[25]  H. Choi,et al.  Synthesis and thermal analysis of hydrophobic iron oxide nanoparticles for improving in-situ combustion efficiency of heavy oils , 2019, Journal of Industrial and Engineering Chemistry.

[26]  M. Varfolomeev,et al.  Copper stearate as a catalyst for improving the oxidation performance of heavy oil in in-situ combustion process , 2018, Applied Catalysis A: General.

[27]  M. V. Kok,et al.  Isoconversional methods to determine the kinetics of crude oils -thermogravimetry approach , 2018, Journal of Petroleum Science and Engineering.

[28]  Weipeng Yang,et al.  Low temperature oxidation of crude oil: Reaction progress and catalytic mechanism of metallic salts , 2018, Fuel.

[29]  Wan-fen Pu,et al.  Oxidation Behavior and Kinetics of Eight C20–C54 n-Alkanes by High Pressure Differential Scanning Calorimetry (HP-DSC) , 2018, Energy & Fuels.

[30]  M. Varfolomeev,et al.  Oxidation Behavior and Kinetics of Light, Medium, and Heavy Crude Oils Characterized by Thermogravimetry Coupled with Fourier Transform Infrared Spectroscopy , 2018 .

[31]  E. V. Kopylova,et al.  Oxidation Behavior of Light Crude Oil and Its SARA Fractions Characterized by TG and DSC Techniques: Differences and Connections , 2017 .

[32]  M. V. Kok,et al.  Thermal characterization of crude oils in the presence of limestone matrix by TGA-DTG-FTIR , 2017 .

[33]  A. Kovscek,et al.  Analysis of the effects of copper nanoparticles on in-situ combustion of extra heavy-crude oil , 2017 .

[34]  Yibo Li,et al.  Thermal Characteristics and Combustion Kinetics Analysis of Heavy Crude Oil Catalyzed by Metallic Additives , 2015 .

[35]  H. Bruining,et al.  Recovery of light oil by air injection at medium temperature: Experiments , 2015 .

[36]  Zheng Chen,et al.  Catalytic Effect of Transition Metallic Additives on the Light Oil Low-Temperature Oxidation Reaction , 2015 .

[37]  H. Curran,et al.  Revisiting the Kinetics and Thermodynamics of the Low-Temperature Oxidation Pathways of Alkanes: A Case Study of the Three Pentane Isomers. , 2015, The journal of physical chemistry. A.

[38]  Nashaat N. Nassar,et al.  Comparing kinetics and mechanism of adsorption and thermo-oxidative decomposition of Athabasca asphaltenes onto TiO2, ZrO2, and CeO2 nanoparticles , 2014 .

[39]  O. V. Trevisan,et al.  Catalytic Effect Of Metallic Additives On In-situ Combustion Of Two Brazilian Medium And Heavy Oils , 2014 .

[40]  Y. Mortazavi,et al.  Enhanced pyrolysis and oxidation of asphaltenes adsorbed onto transition metal oxides nanoparticles towards advanced in-situ combustion EOR processes by nanotechnology , 2014 .

[41]  M. Ranjbar,et al.  Thermocatalytic in situ combustion: Influence of nanoparticles on crude oil pyrolysis and oxidation , 2013 .

[42]  German Luna,et al.  Kinetics of the catalytic thermo-oxidation of asphaltenes at isothermal conditions on different metal oxide nanoparticle surfaces , 2013 .

[43]  Tayfun Babadagli,et al.  Enhancement of the efficiency of in situ combustion technique for heavy-oil recovery by application of nickel ions , 2013 .

[44]  M. Husein,et al.  Oxidation of asphaltenes adsorbed onto NiO nanoparticles , 2012 .

[45]  M. V. Kok.  Characterization of medium and heavy crude oils using thermal analysis techniques , 2011 .

[46]  N. Nassar,et al.  Metal Oxide Nanoparticles for Asphaltene Adsorption and Oxidation , 2011 .

[47]  P. Glaude,et al.  Experimental confirmation of the low-temperature oxidation scheme of alkanes. , 2010, Angewandte Chemie.

[48]  R. Hughes,et al.  Comparison of conventional and catalytic in-situ combustion processes for oil recovery , 2009 .

[49]  R. G. Moore,et al.  Chemically Assisted Ignition Technologies for a Light Oil Air Injection Process , 2005 .

[50]  A. Kovscek,et al.  Improved In-Situ Combustion Performance With Metallic Salt Additives , 2005 .

[51]  M. V. Kok,et al.  Characterization and Kinetics of Light Crude Oil Combustion in the Presence of Metallic Salts , 2004 .

[52]  R. G. Moore,et al.  Investigation of the Oxidation Behaviour of Hydrocarbon and Crude Oil Samples Utilizing DSC Thermal Techniques , 2004 .

[53]  Margot Gerritsen,et al.  Experimental Investigation and High Resolution Simulator of in-situ Combustion Processes; 1. Simulator Design and Improved Combustion with Metallic Additives , 2004 .

[54]  Joseph H. Flynn,et al.  A quick, direct method for the determination of activation energy from thermogravimetric data , 1966 .

[55]  T. Ozawa.  A New Method of Analyzing Thermogravimetric Data , 1965 .