Performance evaluation of an air-breathing high-temperature proton exchange membrane fuel cell

[1]  Hong Sun,et al.  A numerical study on the effects of temperature and mass transfer in high temperature PEM fuel cells with ab-PBI membrane☆ , 2015 .

[2]  Huide Fu,et al.  High-temperature passive direct methanol fuel cells operating with concentrated fuels , 2015 .

[3]  Qingfeng Li,et al.  Binderless electrodes for high-temperature polymer electrolyte membrane fuel cells , 2014 .

[4]  Elio Jannelli,et al.  3D CFD modeling and experimental characterization of HT PEM fuel cells at different anode gas compositions , 2014 .

[5]  S. Cha,et al.  Ultra compact direct hydrogen fuel cell prototype using a metal hydride hydrogen storage tank for a mobile phone , 2014 .

[6]  Samuel Simon Araya,et al.  Aalborg Universitet Comparative study of the break in process of post doped and sol – gel high temperature proton exchange membrane fuel cells , 2014 .

[7]  Werner Lehnert,et al.  Design and test of a 5kWe high-temperature polymer electrolyte fuel cell system operated with diesel and kerosene , 2014 .

[8]  Lin Ma,et al.  Thermal modelling of the cathode in air-breathing PEM fuel cells , 2013 .

[9]  Antonio J. Martín,et al.  A portable system powered with hydrogen and one single air-breathing PEM fuel cell , 2013 .

[10]  O. Barbera,et al.  1.5 kWe HT-PEFC stack with composite MEA for CHP application , 2013 .

[11]  H. Ju,et al.  Numerical modeling and investigation of gas crossover effects in high temperature proton exchange membrane (PEM) fuel cells , 2013 .

[12]  Qing Du,et al.  Numerical simulations of carbon monoxide poisoning in high temperature proton exchange membrane fuel cells with various flow channel designs , 2013 .

[13]  P. Manoj Kumar,et al.  A passive method of water management for an air-breathing proton exchange membrane fuel cell , 2013 .

[14]  A. Casalegno,et al.  On the activation of polybenzimidazole-based membrane electrode assemblies doped with phosphoric acid , 2012 .

[15]  Y. Oono,et al.  Long-term cell degradation mechanism in high-temperature proton exchange membrane fuel cells , 2012 .

[16]  Hyuk Chang,et al.  Cross-Linked Benzoxazine–Benzimidazole Copolymer Electrolyte Membranes for Fuel Cells at Elevated Temperature , 2012 .

[17]  H. Reichl,et al.  Influences of current collector foils with different opening ratios in passive polymer electrolyte m , 2011 .

[18]  Xianguo Li,et al.  Water transport in polymer electrolyte membrane fuel cells , 2011 .

[19]  Zhe Tang,et al.  Performance enhancement of air-breathing proton exchange membrane fuel cell through utilization of an effective self-humidifying platinum–carbon catalyst , 2010 .

[20]  Adélio Mendes,et al.  Activation procedures characterization of MEA based on phosphoric acid doped PBI membranes , 2010 .

[21]  Fritz B. Prinz,et al.  Passive water management at the cathode of a planar air-breathing proton exchange membrane fuel cell , 2010 .

[22]  K. Wippermann,et al.  Cell resistances of poly(2,5-benzimidazole)-based high temperature polymer membrane fuel cell membrane electrode assemblies: Time dependence and influence of operating parameters , 2010 .

[23]  B. A. Sexton,et al.  Investigations on fabrication and lifetime performance of self – air breathing direct hydrogen micro fuel cells , 2010 .

[24]  P. Bouillon,et al.  Innovative water management in micro air-breathing polymer electrolyte membrane fuel cells , 2010 .

[25]  K. Scott,et al.  A polymer electrolyte membrane for high temperature fuel cells to fit vehicle applications , 2010 .

[26]  Pablo Cañizares,et al.  Study of the influence of the amount of PBI–H3PO4 in the catalytic layer of a high temperature PEMFC , 2010 .

[27]  N. M. Zagudaeva,et al.  Degradation of high temperature MEA with PBI-H3PO4 membrane in a life test , 2009 .

[28]  Rachid Bennacer,et al.  Lattice Boltzmann simulation of natural convection in an open ended cavity , 2009 .

[29]  Narissara Bussayajarn,et al.  Planar air breathing PEMFC with self-humidifying MEA and open cathode geometry design for portable applications , 2009 .

[30]  R. Savinell,et al.  #2#1 and #2#1 NMR Study of Phosphoric Acid–Doped Polybenzimidazole under Controlled Water Activity , 2009 .

[31]  Suk Won Cha,et al.  Air-breathing miniature planar stack using the flexible printed circuit board as a current collector , 2009 .

[32]  Brian C. Benicewicz,et al.  Durability Studies of PBI‐based High Temperature PEMFCs , 2008 .

[33]  Thomas J. Schmidt,et al.  Properties of high-temperature PEFC Celtec®-P 1000 MEAs in start/stop operation mode , 2008 .

[34]  Ronghuan He,et al.  Preparation and operation of gas diffusion electrodes for high-temperature proton exchange membrane fuel cells , 2007 .

[35]  Fritz B. Prinz,et al.  Engineering model of a passive planar air breathing fuel cell cathode , 2007 .

[36]  P. Cañizares,et al.  PBI-based polymer electrolyte membranes fuel cells: Temperature effects on cell performance and catalyst stability , 2007 .

[37]  S. Chung,et al.  NMR Studies of Mass Transport in High-Acid-Content Fuel Cell Membranes Based on Phosphoric Acid and Polybenzimidazole , 2007 .

[38]  P. Lettieri,et al.  An introduction to heat transfer , 2007 .

[39]  Jingwei Hu,et al.  500 h Continuous aging life test on PBI/H3PO4 high-temperature PEMFC , 2006 .

[40]  C. Tomasi,et al.  Developments of new proton conducting membranes based on different polybenzimidazole structures for fuel cells applications , 2006 .

[41]  In-Hwan Oh,et al.  Effects of cathode open area and relative humidity on the performance of air-breathing polymer electrolyte membrane fuel cells , 2006 .

[42]  Chao-Yang Wang,et al.  Effects of hydrophobic polymer content in GDL on power performance of a PEM fuel cell , 2004 .

[43]  Jesse S. Wainright,et al.  Conductivity of PBI Membranes for High-Temperature Polymer Electrolyte Fuel Cells , 2004 .

[44]  S. Srinivasan,et al.  Quantum jumps in the PEMFC science and technology from the 1960s to the year 2000 Part I. Fundamental scientific aspects , 2001 .

[45]  Jesse S. Wainright,et al.  Acid-doped polybenzimidazoles : a new polymer electrolyte , 1995 .