Experimental and numerical investigations of hybrid laser arc welding of aluminum alloys in the thick T-joint configuration

[1]  Chuansong Wu,et al.  Numerical analysis of welding residual stress and distortion in laser+GMAW hybrid welding of aluminum alloy T-joint , 2013, Acta Metallurgica Sinica (English Letters).

[2]  V. Vuletić.  Atomic physics: An almost lightless laser , 2012, Nature.

[3]  M. M. Atabaki,et al.  Low-temperature partial transient liquid phase diffusion bonding of Al/Mg2Si metal matrix composite to AZ91D using Al-based interlayer , 2012 .

[4]  M. Pouranvari,et al.  Metallurgical and Mechanical Characterization of Laser Spot Welded Low Carbon Steel Sheets , 2010 .

[5]  Radovan Kovacevic,et al.  3D finite element modeling of the thermally induced residual stress in the hybrid laser/arc welding of lap joint , 2010 .

[6]  C. Cheng.  Butt-welding Residual Stress of Heat Treatable Aluminum Alloys , 2009 .

[7]  M. Koçak,et al.  Microstructural and mechanical characterization of electron beam welded Al-alloy 7020 , 2007 .

[8]  Liming Liu,et al.  Microstructure of laser-TIG hybrid welds of dissimilar Mg alloy and Al alloy with Ce as interlayer , 2006 .

[9]  Zhenglong Lei,et al.  Experimental study on welding characteristics of CO2 laser TIG hybrid welding process , 2006 .

[10]  Lin Li,et al.  A comparative study of wire feeding and powder feeding in direct diode laser deposition for rapid prototyping , 2005 .

[11]  R. C. Crafer,et al.  Thermal modelling of laser welding and related processes: a literature review , 2005 .

[12]  J. G. Kaufman,et al.  Aluminum Alloy Castings: Properties, Processes And Applications , 2004 .

[13]  J. Takács,et al.  Laser brazing of aluminium , 2003 .

[14]  Seiji Katayama,et al.  Unbounded keyhole collapse and bubble formation during pulsed laser interaction with liquid zinc , 2002 .

[15]  J. Ion,et al.  Laser beam welding of wrought aluminium alloys , 2000 .

[16]  V. Ventzke,et al.  Characterization of Laser and Electron Beam Welded Al Alloys / Charakterisierung von laser- und elektronenstrahlgeschweißten Aluminiumlegierungen , 2000 .

[17]  J. F. Santos,et al.  Characterisation of electron beam welded aluminium alloys , 1999 .

[18]  D. Lloyd,et al.  Precipitation in aluminum alloys AA6111 and AA6016 , 1999 .

[19]  D. R. White,et al.  Current issues and problems in laser welding of automotive aluminium alloys , 1999 .

[20]  M. Koçak,et al.  Progress in joining of advanced materials Part 2: Joining of metal matrix composites and joining of other advanced materials , 1998 .

[21]  H. Morishima,et al.  Numerical calculations of the temperature distribution and the cooling speed in the laser-heated diamond anvil cell , 1998 .

[22]  J. Norrish,et al.  Mathematical model of welding parameters for rapid prototyping using robot welding , 1997 .

[23]  H. W. Kerr,et al.  The effects of process variables on pulsed Nd:YAG laser spot welds: Part II. AA 1100 aluminum and comparison to AISI 409 stainless steel , 1997 .

[24]  Keng H. Leong,et al.  Laser welding of aluminum alloys , 1997, Photonics West.

[25]  Shōichi Satō,et al.  CO2 Laser Welding of Aluminum Alloys (No.1)-Welding of Aluminum Alloys using CO2 Laser Beam in combination with MIG Arc.:Welding of Aluminum Alloys using CO 2 Laser Beam in combination with MIG Arc , 1997 .

[26]  J. Tu,et al.  A model for estimating penetration depth of laser welding processes , 1996 .

[27]  J. Szekely,et al.  A comprehensive representation of transient , 1987, Metallurgical and Materials Transactions A.

[28]  R. Mclellan,et al.  The diffusivity of hydrogen in aluminum , 1986 .

[29]  D. Laughlin,et al.  Formation of a modified β′ phase in aluminum alloy 6061 , 1984 .

[30]  A. Block-bolten,et al.  Metal vaporization from weld pools , 1984 .

[31]  Thomas W. Eagar,et al.  Temperature fields produced by traveling distributed heat sources , 1983 .

[32]  A. Salminen,et al.  Autogeneous Laser and Hybrid Laser Arc Welding of T-joint Low Alloy Steel with Fiber Laser Systems☆ , 2013 .

[33]  F. Möller,et al.  Interaction Effects between Laser Beam and Plasma Arc in Hybrid Welding of Aluminum , 2013 .

[34]  R. Kovacevic,et al.  An Experimental and Numerical Study of Effect of Textured Surface by Arc Discharge on Strength of Adhesively Bonded Joints , 2012 .

[35]  Z. Boukha,et al.  Weldability of Aluminum Alloys with High-Power Diode Laser Higher penetration than previously reported under the conduction regime were obtained in welds of six aluminum alloys , 2012 .

[36]  Michael Ungers,et al.  Coaxial Control of Aluminum and Steel Laser Brazing Processes , 2011 .

[37]  Eurico Assunção,et al.  Comparative study of laser welding in tailor blanks for the automotive industry , 2010 .

[38]  R. Kovacevic,et al.  Cathodic Cleaning of Oxides from Aluminum Surface by Variable-Polarity Arc , 2010 .

[39]  Danut Iordachescu,et al.  Laser Welding of Structural Aluminium , 2010 .

[40]  D. Weckman,et al.  Effects of Temporal Pulse Shaping on Cracking Susceptibility of 6061-T6 Aluminum Nd:YAG Laser Welds : Use of temporal pulse shaping may make it possible to laser weld 6061-T6 aluminum hermetic packages without the need for filler material , 2008 .

[41]  D. Yapp,et al.  Welding with high power fiber lasers – A preliminary study , 2007 .

[42]  K. Howard,et al.  Welding aluminum sheet using a high-power diode laser : A look at fillet welds in lap joints of aluminum alloy 5182 , 2006 .

[43]  Christian Walz,et al.  The Influence of Various Hybrid Welding Parameters on Bead Geometry Arc power and transfer mode greatly affect bead width, penetration, and reinforcement , 2004 .

[44]  John Ion,et al.  Laser processing of engineering materials , 2002 .

[45]  M. Koçak,et al.  Progress in joining of advanced materials , 1998 .