A thermodynamic basis for predicting falling-film mode transitions

Abstract Horizontal-tube, falling-film heat exchangers are used in many air-conditioning and refrigeration systems. Depending on the tube diameter and spacing, the flow rate, and fluid properties, when a liquid film falls over a series of horizontal tubes three distinct flow patterns can be manifested. These flow patterns are the droplet mode, the jet mode, and the sheet mode. A thermodynamic analysis is undertaken to predict the transitions between these modes. By seeking the condition corresponding to thermodynamic equilibrium between two neighboring modes, a scaling relation is developed for the transitional Reynolds number. This theoretical framework is used to provide the first explanation for the relationship between the transitional Reynolds number and modified Galileo number which has been previously based solely on experimental observations. This approach offers insight into the prevailing physics, and it suggests a tube-spacing effect on the mode transitions which has not previously been anticipated. Using limited data and prior results from the literature it is found that this effect is likely to exist. The implications of this thermodynamic approach to predicting two-phase flow patterns are discussed in terms of entropy generation minimization and transition hysteresis, as is its incompleteness.

[1]  John R. Thome,et al.  Falling-Film Evaporation on Tube Bundle with Plain and Enhanced Tubes—Part I: Experimental Results , 2010 .

[2]  Hiroshi Honda,et al.  Film condensation of R-113 on in-line bundles of horizontal finned tubes , 1991 .

[3]  Ilya Prigogine,et al.  Introduction to Thermodynamics of Irreversible Processes , 1967 .

[4]  John R. Thome,et al.  Falling Film Transitions on Plain and Enhanced Tubes , 2002 .

[5]  J. R. Thome,et al.  Measurement of Falling Film Thickness Around a Horizontal Tube Using a Laser Measurement Technique , 2004 .

[6]  A. Jacobi,et al.  Departure-site spacing for liquid droplets and jets falling between horizontal circular tubes , 1998 .

[7]  P. Hrnjak,et al.  Heat Transfer Performance for a Falling-Film on Horizontal Flat Tubes , 2013 .

[8]  Predrag Stojan Hrnjak,et al.  Flow Modes and Mode Transitions for Falling Films on Flat Tubes , 2012 .

[9]  D. Yung,et al.  Vapor/Liquid Interaction and Entrainment in Falling Film Evaporators , 1980 .

[10]  John R. Thome,et al.  Falling-Film Evaporation on Tube Bundle with Plain and Enhanced Tubes—Part II: New Prediction Methods , 2010 .

[11]  John R. Thome,et al.  Falling Film Transitions Between Droplet, Column, and Sheet Flow Modes on a Vertical Array of Horizontal 19 FPI and 40 FPI Low-Finned Tubes , 2003 .

[12]  Anthony M. Jacobi,et al.  Falling-film evaporation on horizontal tubes—a critical review , 2005 .

[13]  Siyoung Jeong,et al.  Falling-film and droplet mode heat and mass transfer in a horizontal tube LiBr/water absorber , 2002 .

[14]  Anthony M. Jacobi,et al.  Effects of a countercurrent gas flow on falling-film mode transitions between horizontal tubes , 2009 .

[15]  H. Perez-blanco.  A model of an ammonia-water falling film absorber , 1988 .

[16]  J. Thome,et al.  Falling film evaporation on enhanced tubes, part 1: Experimental results for pool boiling, onset-of-dryout and falling film evaporation , 2012 .

[17]  A. Jacobi,et al.  Effects of Liquid Supply Method on Falling-Film Mode Transitions on Horizontal Tubes , 2013 .

[18]  J. Mitrovic.  Flow Structures of a Liquid Film Falling on Horizontal Tubes , 2005 .

[19]  J. Kelly,et al.  Spray evaporation heat transfer performance in R-123 in tube bundles , 1996 .

[20]  J. Mitrovic.  INFLUENCE OF TUBE SPACING AND FLOW RATE ON HEAT TRANSFER FROM A HORIZONTAL TUBE TO A FALLING LIQUID FILM , 1986 .

[21]  S. Zivi.  Estimation of Steady-State Steam Void-Fraction by Means of the Principle of Minimum Entropy Production , 1964 .

[22]  John R. Thome,et al.  Falling Film Evaporation: State-of-the-Art Review of Recent Work , 1999 .

[23]  Jovan Mitrovic,et al.  PATTERNS OF FALLING FILM FLOW OVER HORIZONTAL SMOOTH TUBES , 1994 .

[24]  A. Jacobi,et al.  Ultrasonication effects on thermal and rheological properties of carbon nanotube suspensions , 2012, Nanoscale Research Letters.

[25]  S. Bankoff,et al.  Long-wave instabilities of heated falling films: two-dimensional theory of uniform layers , 1991, Journal of Fluid Mechanics.

[26]  A. Jacobi,et al.  Heat transfer characteristics of multiwall carbon nanotube suspensions (MWCNT nanofluids) in intertube falling-film flow , 2012 .

[27]  S. Middleman,et al.  Newtonian jet stability , 1966 .

[28]  Y. Hwang,et al.  Photoluminescence characteristics of Cd1-xMnxTe single crystals grown by the vertical Bridgman method , 2012, Nanoscale Research Letters.

[29]  J. Thome,et al.  Falling film evaporation on enhanced tubes, part 2: Prediction methods and visualization , 2012 .

[30]  Flow Characteristics of Condensate on a Vertical Column of Horizontal Low Finned Tubes , 1987 .

[31]  P. Hrnjak,et al.  Flow Patterns and Mode Transitions for Falling-Film on Flat Tubes , 2014 .

[32]  V. Sernas,et al.  EVAPORATION HEAT TRANSFER COEFFICIENTS FOR THIN SEA WATER FILMS ON HORIZONTAL TUBES , 1975 .

[33]  A. Jacobi,et al.  Investigation on Intertube Falling-Film Heat Transfer and Mode Transitions of Aqueous-Alumina Nanofluids , 2011 .

[34]  Anthony M. Jacobi,et al.  The intertube falling film: Part 2-Mode effects on sensible heat transfer to a falling liquid film , 1996 .

[35]  Anthony M. Jacobi,et al.  The intertube falling film: Part 1 - Flow characteristics, mode transitions, and hysteresis , 1996 .