Assessing the effect of inherent nonlinearities in the analysis and design of a low-rise base isolated steel building

Seismic isolation is an effective method for the protection of buildings and their contents during strong earthquakes. This research work aims to assess the appropriateness of the linear and nonlinear models that can be used in the analysis of typical low-rise base isolated steel buildings, taking into account the inherent nonlinearities of the isolation system as well as the potential nonlinearities of the superstructure in case of strong ground motions. The accuracy of the linearization of the isolator properties according to Eurocode 8 is evaluated comparatively with the corresponding response that can be obtained through the nonlinear hysteretic Bouc-Wen constitutive model. The suitability of the linearized model in the determination of the size of the required seismic gap is assessed, under various earthquake intensities, considering relevant methods that are provided by building codes. Furthermore, the validity of the common assumption of elastic behavior for the superstructure is explored and the alteration of the structural response due to the inelastic deformations of the superstructure as a consequence of potential collision to the restraining moat wall is studied. The usage of a nonlinear model for the isolation system is found to be necessary in order to achieve a sufficiently accurate assessment of the structural response and a reliable estimation of the required width of the provided seismic gap. Moreover, the simulations reveal that the superstructure`s inelasticity should be taken into account, especially if the response of the structure under high magnitude earthquakes is investigated. The consideration of the inelasticity of the superstructure is also recommended in studies of structural collision of seismically isolated structures to the surrounding moat wall, since it affects the response.

[1]  Jiahao Lin,et al.  An Introduction to Seismic Isolation , 1993 .

[2]  Farzad Naeim,et al.  Design of seismic isolated structures : from theory to practice , 1999 .

[3]  Arturo Tena-Colunga,et al.  Torsional amplifications in asymmetric base-isolated structures , 2007 .

[4]  Y. K. Wen,et al.  Random vibration of hysteretic systems under bi‐directional ground motions , 1986 .

[5]  Li Zhou,et al.  Parameter identification of hysteretic model of rubber-bearing based on sequential nonlinear least-square estimation , 2010 .

[6]  C. S. Tsai,et al.  Seismic behavior of structures isolated with a hybrid system of rubber bearings , 2006 .

[7]  Shin Okamoto,et al.  Response Control and Seismic Isolation of Buildings , 2006 .

[8]  Yu Li,et al.  Parametric Study on Seismic Energy Response of Base-Isolated Structures , 2008, 2008 International Workshop on Modelling, Simulation and Optimization.

[9]  Wilfred D. Iwan,et al.  The effective period and damping of a class of hysteretic structures , 1979 .

[10]  Y. Wen.  Method for Random Vibration of Hysteretic Systems , 1976 .

[11]  V. Koumousis,et al.  On the response and dissipated energy of Bouc-Wen hysteretic model , 2008 .

[12]  Michael C. Constantinou,et al.  Nonlinear Dynamic Analysis of 3‐D‐Base‐Isolated Structures , 1991 .

[13]  Emilio Rosenblueth,et al.  Fundamentals of earthquake engineering , 1971 .

[14]  Deepak R. Pant,et al.  Structural performance of a base‐isolated reinforced concrete building subjected to seismic pounding , 2012 .

[15]  Petros Komodromos,et al.  Assessing the suitability of equivalent linear elastic analysis of seismically isolated multi-storey buildings , 2011 .

[16]  Hsiang-Chuan Tsai.  DYNAMIC ANALYSIS OF BASE‐ISOLATED SHEAR BEAMS BUMPING AGAINST STOPS , 1997 .

[17]  Costas P. Providakis,et al.  Pushover analysis of base-isolated steel–concrete composite structures under near-fault excitations , 2008 .

[18]  Vojko Kilar,et al.  Seismic behaviour of asymmetric base isolated structures with various distributions of isolators , 2009 .

[19]  Nicos Makris,et al.  The engineering merit of the “Effective Period” of bilinear isolation systems , 2013 .

[20]  Panayiotis C. Polycarpou,et al.  Numerical investigation of potential mitigation measures for poundings of seismically isolated buildings , 2011 .

[21]  R. Bouc.  Forced Vibration of Mechanical Systems with Hysteresis , 1967 .

[22]  Vojko Kilar,et al.  Simplified inelastic seismic analysis of base‐isolated structures using the N2 method , 2009 .

[23]  Robert Jankowski,et al.  Pounding-involved response of isolated and non-isolated buildings under earthquake excitation , 2010 .

[24]  Murat Dicleli,et al.  Comprehensive evaluation of equivalent linear analysis method for seismic-isolated structures represented by sdof systems , 2007 .

[25]  Vasant Matsagar,et al.  Influence of isolator characteristics on the response of base-isolated structures , 2004 .

[26]  Petros Komodromos,et al.  Seismic Isolation for Earthquake Resistant Structures , 2000 .