Aerodynamic Optimization of a Single-Stage Axial Compressor with Stator Shroud Air Injection

The effects of stator shroud air injection on aerodynamic performance were investigated for a single-stage axial compressor. Multiobjective optimization of the air injector was performed to maximiz...

[1]  Kwang-Yong Kim,et al.  Efficient multi-objective optimization of a boot-shaped rib in a cooling channel , 2016 .

[2]  Kwang‐Yong Kim,et al.  Aerodynamic performance of transonic axial compressor with a casing groove combined with blade tip injection and ejection , 2015 .

[3]  Kwang‐Yong Kim,et al.  Optimization of the Aerodynamic and Aeroacoustic Performance of an Axial-Flow Fan , 2014 .

[4]  Yanhui Wu,et al.  Numerical Investigation on the Effects of Circumferential Coverage of Injection in a Transonic Compressor With Discrete Tip Injection , 2014 .

[5]  W. Chu,et al.  The effect of injector size on compressor performance in a transonic axial compressor with discrete tip injection , 2014 .

[6]  Kwang-Yong Kim,et al.  Three-objective optimization of a staggered herringbone micromixer , 2014 .

[7]  Jin-Hyuk Kim,et al.  Aerodynamic optimization of a transonic axial compressor with a casing groove combined with tip injection , 2013 .

[8]  Kwang‐Yong Kim,et al.  AERODYNAMIC PERFORMANCE OF AN AXIAL COMPRESSOR WITH A CASING GROOVE COMBINED WITH INJECTION , 2013 .

[9]  Islem Benhegouga,et al.  Steady Air Injection Flow Control Parameters in a Transonic Axial Compressor , 2013 .

[10]  M. Sheikhalishahi,et al.  A hybrid GA–PSO approach for reliability optimization in redundancy allocation problem , 2013 .

[11]  Stephan Staudacher,et al.  Effects of tip injection on the performance of a multi-stage high-pressure compressor , 2011 .

[12]  Kwang-Yong Kim,et al.  Surrogate Based Optimization Techniques for Aerodynamic Design of Turbomachinery , 2009 .

[13]  Kwang-Yong Kim,et al.  Optimization of a staggered dimpled surface in a cooling channel using Kriging model , 2008 .

[14]  Kwang-Yong Kim,et al.  Shape optimization of wire-wrapped fuel assembly using Kriging metamodeling technique , 2008 .

[15]  Kwang-Yong Kim,et al.  Multiple surrogate modeling for axial compressor blade shape optimization , 2008 .

[16]  Carsten Clemen,et al.  Active Flow Control in a Single-Stage Axial Compressor Using Tip Injection and Endwall Boundary Layer Removal , 2008 .

[17]  Song Fu,et al.  CFD Investigation on Stall Mechanisms and Casing Treatment of a Transonic Compressor , 2006 .

[18]  Choon-Man Jang,et al.  Optimization of a stator blade using response surface method in a single-stage transonic axial compressor , 2005 .

[19]  Rajeev Thakur,et al.  Optimizing the Synchronization Operations in Message Passing Interface One-Sided Communication , 2005, Int. J. High Perform. Comput. Appl..

[20]  T. Simpson,et al.  Use of Kriging Models to Approximate Deterministic Computer Models , 2005 .

[21]  Bhaskar Roy,et al.  Experimental Study of Boundary Layer Control Through Tip Injection on Straight and Swept Compressor Blades , 2005 .

[22]  Ernesto Benini,et al.  Three-Dimensional Multi-Objective Design Optimization of a Transonic Compressor Rotor , 2003 .

[23]  Dennis E. Culley,et al.  Active Flow Separation Control of a Stator Vane Using Surface Injection in a Multistage Compressor Experiment , 2003 .

[24]  Kalyanmoy Deb,et al.  A fast and elitist multiobjective genetic algorithm: NSGA-II , 2002, IEEE Trans. Evol. Comput..

[25]  R. H. Myers,et al.  Response Surface Methodology: Process and Product Optimization Using Designed Experiments , 1995 .